SDG
PCBWay Assembly and PCBs from $30 for 20 pieces at www.pcbway.com/
/ sdgelectronics
A big thank you to all of my Patreon supporters!
-------------------------------------------------------------------------------------------------
0:00 Background Info
0:30 PCBWay PCBs
0:56 PCB assembly options
1:59 Placing an order
2:47 Ordering the Driver Boards
4:13 Production Files
5:59 Cost for my PCBs
6:31 Timelines for ordering
7:38 What was delivered?
7:53 Assembly Quality
9:14 My thoughts...
-------------------------------------------------------------------------------------------------
Soldering Tools and Equipment:
Solder Paste: bit.ly/2E1P5jR
Solder Flux: bit.ly/2MQn7we
Quick 857DW+ Hot Air Station: bit.ly/2OWDvf4
T12 Soldering Station: www.banggood.c...
AC Version: www.banggood.c...
T12 Iron Tips: www.banggood.c...
Daniu Tip Cleaner: bit.ly/31VHwWM
KSGER T12-BCM3 Tip: bit.ly/2xgYXCQ
Test Equipment:
Mustool MDS8207 Multimeter: bit.ly/2kKHr7A
FY6900 Generator: bit.ly/2yZI40n
Differential Probe: bit.ly/31xNTOF
Microscope Equipment:
Eakins Barlow Lenses: bit.ly/3aBY5tR
Eakins Black Microscope: bit.ly/2VEcYaW
Eakins Camera Microscope: bit.ly/2x86hnT
Camera Adaptor for Microscopes: bit.ly/2KBZQMQ
Amscope Microscope Head (US): amzn.to/2YmZWNx
Amscope Trinocular Microscope (US): amzn.to/2YdBE8k
Amscope Trinocular Microscope (UK): amzn.to/2V8w9Gh
Swift SS41-WF20 Binocular Microscope US: amzn.to/2VLWEpb
Swift SS41-WF20 Binocular Microscope UK: amzn.to/2GYGYFV
Visit my website: www.sdgelectro...
#pcba #assembly #pcbway #ElectronicsCreators
Пікірлер: 44
Interesting for future reference, but currently out of my scale. I think they should maybe consider ways to streamline. Give me a list of common circuit building block examples using parts they try to keep in stock. Specifically, circuit blocks like common power supplies, radio modules, microcontrollers, and displays. I'm currently half-looking for feasible replacements for an I2S audio amp and an unobtainium clad dc converter from Dialog Semi (DA9230 -incredible part btw). If I had easy circuit blocks I could find and drop into kicad, and then get assembled at a good price, this type of service would be more appealing IMO. If they had some really good designs to use and people really use them, it might be possible to setup the circuit blocks with their own assembly process even if the rest of the circuit needed human assembly. Something like for instance, if I drop in their lithium battery circuit block into my design with their footprints, track layout, and X..Z components, they give me the performance specs and a special price for using the circuit block. They could even make a custom symbol and component library I could drop into kicad and use. Just make the entire block as a single part. Just an idea. -Jake
Thanks Steve, might be good for prototypes in work where we already have the components in stock. Will wait for the next video.
That assembly and reflow looks terrible! Sorry to say, when I order assembly on jlcpcb they look 10 times nicer!
@111chicane
3 жыл бұрын
Exactly what I thought seeing this. The only advantage PCBWay has is, that you can have THT components soldered and no limitations for the components themselves. PCBWay is also 2-3 times more expensive than JLCPCB for the same service with much slower turnaround time. However, JLCPCB's component library for their SMT service is so limited, it's a nightmare to deal with when it comes to more complicated designs.
@RichardSloan65
3 жыл бұрын
@@111chicane yep, most of my stuff is relatively simple and if they don't have the odd part I just put them on myself, they do 98% and yes tonnes cheaper
It's the best tutorial of SMT service on PCBWay 4_2_day.
Its also good to know that PCBWAY was the only one that could assemble a RED soldermask pcb, jlcpcb cannot, also pcbway can put usb connectors etc. and jlcpcb does not have the capabilities for it as of yet. So jlcpcb is "much cheaper" but the headroom and possibilities you get with PCBWAY is sometimes very very needed.
@SACRED521954
3 жыл бұрын
Not to mention the limited qty of pcb's you can send for assembly at once (i think that jlcpcb can only do a order of 50)
@SACRED521954
3 жыл бұрын
Also the low volume question you asked, I think thats why the starting assembly price is usually around 80$ so maybe they do actually hand solder it since the premium is quite a lot for a low number of boards compare to i.e. jlcpcb
They may have pnp machines set up with common components and just swap in/out a few parts in cartridge style feeders.
I was wondering; does the price of the components they sourced matched the price of the components if you bought them yourself from LCSC?
@sdgelectronics
3 жыл бұрын
I didn't get a breakdown, but I'll quickly work it out ready for the next video bringing up this PCB.
@codemakeshare
3 жыл бұрын
@@sdgelectronics been using their PCBA for a long time, and we asked them about pricing at some point as we noticed higher prices. Apparently digikey prices are higher for them in China than for us in Europe, so boards with a lot of component costs can get pricier, sometimes even exceeding the price we could get for EU-based PCBA where manufacturing costs are higher but Digikey component cheaper. I once did a very low cost board (50 units,
@sdgelectronics
3 жыл бұрын
@@codemakeshare thanks for the info. Good feedback for anyone reading
@YetAnotherElectronicsChannel
3 жыл бұрын
@codemakeshare I actually figured out the same. Professional PCBA service is not really cheaper in china compared to us in the european-union. I order relatively often boards from PCBA services in my job. Always low-volume (
@YetAnotherElectronicsChannel
3 жыл бұрын
I think the cheapest way for hobbyists is to order single-PCBs from e.g. JLCPCB with stencil and to get the parts directly from a distributor. SMD soldering with stencil is relatively easy.
Very interesting! Thanks for showing!
Thank you!
10:08 - Yeah, they won't load just 20 components but rather a full reel and only pick 20 from there. That's what "extended parts" and the setup cost associated with that is. Nobody is placing those by hand.
Mmm not impressed with the soldering, were all boards the same?.
@sdgelectronics
3 жыл бұрын
Sadly yes, trying to remove the MOSFET to replace with the other part was almost impossible. Not sure what this paste is
They made them by hand, using the same stencil technique you've shown before. Too little paste everywhere. They are a stingy bunch! You did a great job. The boards look great.
@Tr1p93
3 жыл бұрын
If you use too much solder paste on low pitch QFN's you risk shorts which can result in a board not working at all. Better to use thinner stencils everywere because then the risk of a component shorting out is less. It also reduces the chance of the components tombstoning because if you use less solder paste the tensile strength is less. The potential corrosion that can happen on pads which are not completely covered in solder paste is less of an issue. Is it ideal? No not really you would prefer every pad to be completely covered but there is a reason these services are so cheap (also very cheap labor).
@piconano
3 жыл бұрын
@@Tr1p93 You haven't said anything that most people here don't already know. It's still short ~50%. This was a hand-job.
@chrislee6650
Жыл бұрын
Definitely made by hand, there is a video on KZread somewhere of PCBWay and they have a row of staff hand assembling boards that are low quantity orders. It is really a prototyping service so not going to be perfect, but I think I would rather do the placement and reflow myself for such a low quantity as quite frankly, what I've done myself, is way better than what is shown here. It wouldn't save much time either as there is extra work placing the order with them for the BOM and pick and place files, which they didn't use in this case.
I don't know if it's my solder/flux, but I notice tin pads wick a bit easier than gold.
@sdgelectronics
3 жыл бұрын
HASL will always flow better as it's already tinned. The main issue is the components may not always sit flat though
Hi Steve, I really enjoy your videos. Would you be able to review the SUGON T26 precision soldering iron by any chance? I saw FansCreate are sponsoring YT channels to review the unit.
Can PCBWAY do FPC/FFC SMD connectors? I couldn't find any details. JLCPCB will do assembly but not FPC/FFC connectors.
@sdgelectronics
3 жыл бұрын
Yes, there's no issue with that
With PCBWay were you able to preview the assembly to correct rotations of the SMD components in the assembly file?
@sdgelectronics
3 жыл бұрын
They sent a photo of the first PCB for approval, but there was no check prior to that point other than I had made an error on the MOSFET (I'd picked a DPAK instead of D2PAK) and asked how I'd like to proceed. I think if anything was unclear they would confirm first
@cmasupra
3 жыл бұрын
I was sent 2 pictures of the first board they assembled for me (1 front, 1 back) and was asked whether the component rotations were correct. Once I confirmed everything looked good, they assembled the rest of my boards.
Isn't this far more expensive than JLCPCB? But then the only advantage that you can use DigiKey when LCSC does not have the components (in stock)?
@sdgelectronics
3 жыл бұрын
I'll work out the cost of the components and see
@EnricoConca
3 жыл бұрын
It is very likely more expensive, but I would say that JLCPCB's isn't a full-on assembly service: they only assemble one side of the board, they lack any kind of connector whatsoever and if they are out of a specific component, you are screwed until they eventually re-stock it. With that said, I had a few boards assembled by JLCPCB and the soldering was really good, assembly was really fast and very cheap.
crikey that soldering looks like shit! Ive ordered PCBA from pcbway before (leaded solder & 20 boards one design, 20 boards another) and the quality was much much better. All the prototyping was was reflowed in a toaster oven I got on the cheap with an eyeballed reflow profile and even that came out a million times better. I guess time is $$, maybe the person loaded the 2-layer profile onto the mini reflow oven haha
9:00 i think your pads are too big for those components
@9:35 i hear chinese prison labor is very cheap.
@wthornton7346
3 жыл бұрын
Why go all the way to China? news.sky.com/story/leicester-up-to-10-000-could-be-victims-of-modern-slavery-in-textile-factories-12027289
@denziljoe
3 жыл бұрын
So is US prison labour
careful with jlcpcb. My bank account was hacked from using jlcpcb. They stole over 500$ from me. chances are that they are stealing your pcb designs as well. DO NOT TRUST CHINA!!!
Not soldering by hand affects how you understand how the electrons will be polarised in the traces. This level of abstraction is just far too much.