SCX24 - Wheel Nuts Not Reaching Axle and/or Binding After Newly Installed Upgrade Parts
Ойын-сауық
We have seen multiple people asking about wheel nuts not fitting and binding happening after trying to install new wheels or hex extenders on the SCX24. We do a little tutorial on the different things that may cause this and how to fix them! (It's called a Barrel Nut!)
Purchasing from these links really helps support the channel!!
Parts In this video:
Treal Brass Extended Wheel Spacers (4p) +5mm Axle Counter Weight Type B for Axial SCX24 (Black): amzn.to/3Ef1Gyo
Treal 1.0 Beadlock Wheels SCX24 Wheels (4P) for 1/24 RC Crawler Axial SCX24 11.6g(Green-Black): amzn.to/37Ka38Z
INJORA 1.0 Tires and Beadlock Wheel Rims Set for 1/24 RC: amzn.to/3sclzBz
4 Pieces Brass Extended 7mm Wheel Hex Hub Extension 8mm Thick and 2 Pieces Brass Steering Knuckle: amzn.to/3w2URfC
Treal Brass Extended Wheel Spacers (4p) +5mm Axle Counter Weight Type B: amzn.to/3MU90mm
Vgoohobby RC 4mm Brass Wheel Hub Knuckle Counterweight Front Rear Wheel Axle Drive Shaft: amzn.to/3MMZocU
Bench Gear:
Pro'sKit 900-015 Helping Hands Soldering Aid: amzn.to/3DkNkfx
Lifegoo Heat Insulation Silicone Repair Mat: amzn.to/3Luf44d
SCX24 Toolset: amzn.to/35mjXgh
ANBES Soldering Iron Kit, Upgraded 60W Adjustable Temperature Welding Tool: amzn.to/3u7Owjq
UNIWEIGH Gram Scale,200 gx0.01 g( 7.05 oz x 0.001 oz)Digital Pocket Scale: amzn.to/3u71oWT
Recording Gear:
Blue Yeti USB Mic: amzn.to/3J4Bnf4
Apple Lightning to USB3 Camera Adapter: amzn.to/3LvwaP6
Pasow USB A Male to A Female Extension Cable (50 Feet(15m)): amzn.to/3J4Bnf4
Camera Stand 1: Custom Built
Camera Stand 2: amzn.to/3wJszZH
Camera Stand 3: amzn.to/36wqwgZ
Camera Stand 4: amzn.to/36xhSib Thanks a ton!
We also now have shirts and stuff! Find it all here: my-store-4267224.creator-spri...
Пікірлер: 23
you have single handedly taught me so much about rc cars man!! thank you so much. and i beng watch rc stuff like its an amazing movie lol
@TheShopMiniRC
Жыл бұрын
Hahah thanks a ton for watching. I am honored to have helped. I hope i earned your sub!
Thanks for this tip. I recently got the treal weights for my trx4m. The rear axles were binding. I remembered this video from a while ago. Ground down the tabs and it works great.
@TheShopMiniRC
Жыл бұрын
Glad it helped!!! Be sure to share with anyone else who might need it.
Very helpful thank you for your video
@TheShopMiniRC
12 күн бұрын
Glad it was helpful!
Great Tip!!! I was about to use some blue loctite, works perfect now!!
Thank you. I should of figured this out but it started out of the blue, no changes mind you i have made changes!! Many changes no original parts left but this never did this and just one day I seen they were loose(metal part) so thing go lose even after locktight but you have to be very careful with that on lug nut hell even just these tiny screw can break to easy for it but my rig is a really fast scx24(don't give me crap) rock bouncer so the screws would fall out 3 min into a run before I used that. Anyway I had to use on lug cuss if I tightened the wheel won't speed
@TheShopMiniRC
10 ай бұрын
I am glad the video helped!
Axle extensions and hex extensions together are awesome WITHOUT the lil spacers that come with the axle extensions, I do like how you bring this up right after we talked it shows your awesome at giving advice n are even willing to give an example of the advice 🔥👍🔥 If you do figure out why it kind of binds when turning on the axle extensions (did not have this problem with the hexs so no worries on those) plz make a video mine still kind of do it and after closely watching a few videos I noticed others have the same problem even if they think theyve fixed it lol
@TheShopMiniRC
2 жыл бұрын
It’s hard to say without really looking at it.
This helped!
@TheShopMiniRC
5 ай бұрын
Nice! Glad we were able to help.
Injora stamped deep dish wheels have a thick center hub. Needs those barrel nuts
@TheShopMiniRC
Жыл бұрын
Indeed
Why when ever I put brass knuckles on the front it will bind if I turn the wheels and give it gas do I need to sand down the extended hexes like u where saying in this video
@TheShopMiniRC
Жыл бұрын
I would check to see if you are binding when you have the wheels off. If yes, then it could be the tolerances at the axle and bearing. If no, then you are likely too tight in your wheel nuts.
I was wondering why these hex hubs kept falling off any other tips on using these? I saw some comments saying to avoid these
@TheShopMiniRC
Жыл бұрын
What do you mean, fall off? They should not fall of if you have the nuts on.
How do you stop the wheel nut from backing off? Thread lock??
@TheShopMiniRC
Жыл бұрын
Some have nylon lock nuts and some are blue locktite
Are the axles on both rigs +4 extended?
@TheShopMiniRC
7 ай бұрын
Yeah. Both of those trucks are +4 axle shafts.