great video mike

@MiketheScrapper

8 жыл бұрын

+Cory Legge Thank you

your a very good teacher Mike and I injoy your production

Damn that sucks! I thought all these bigger motors were copper! Guess this is why you should always check first lol

Nice video.... But not all pool motors just have alum. Better brands use the copper. I always cut into the coil first to look to see if it is Alum. If it's copper I go ahead and take it apart. Bigger motors can have up to 15 lbs of copper. Still nice to get ideas on better ways to take them apart thought. Nice job.

great video and info :)

@MiketheScrapper

8 жыл бұрын

+NatureRecycleFlorida Thank you for watching

OK buddy, 1st of all I love your videos, but on this one I must offer a few points of interest that you might find more profit in. 1st of all, time is money as I am sure you know, always use the angle grinder on the casing. 2nd if you do any building or fabricating or fixing of anything take that damn bearing off of the centre shaft and set it aside for future use 3rd and definitely not the least you didn't mention the value of the silver contacts that are present in the top panel of the pump. And please be aware as I hope you are, not every pump is aluminium wiring, it is always worth getting to that point and checking before tossing it in the mixed metal bin. End if I may offer a timesaving suggestion, rather than bothering to mess around with a pry bar and a hammer on the vice to remove the face plates, once the screws are out just throw the sob on the concrete a couple of times, Most of the whole mess will fall apart before your eyes

@alecbeal1706

2 жыл бұрын

What silver contacts ??

@johnnywyld2473

2 жыл бұрын

@@alecbeal1706 There should be several, and most pumps you will have long bars of copper that end with round silver contacts that are the on off switches effectively for the main motor, there are also black circular kind of flat canisters that are bolted in usually with 1 or 2 screws at the point where all of the wiring is on the one side of the pump. Now inside of those black plastic canisters you will find a steel disk on either side of that steel disk there should be at least one if not 2 little silver buttons.

Yeah i Agree With Ya, not worth it, i dont always agree when i hear some1 say - it aint worth it, esp bout microwaves, esp when u gonna go buy magnetics strips post em to the wall hanging tools, simply take em out of the microwaves. Todays vacuum cleaners aint worth the full break dn either. The ole skl Kirbys are tho, but the one i have my DaD owned in 1986 & i aint lettin it go for Scrp. Good Job. Stay Encouraged

@MiketheScrapper

8 жыл бұрын

+MissionScrappr Will I stay away from Vacuums... dusty ...I sell as is. Microwaves, I love to scrap. Lots of copper. I must try that with the Magnets. I have at least 50 lbs of Hard Drive Magnets. I can do it with those too.

Glad to see you back Mike, how these scrap prices treating you? They are really bad here on the west coast.

@MiketheScrapper

8 жыл бұрын

+strakill They are killing me here on the East Coast...

are you going to upload normaly again

@MiketheScrapper

8 жыл бұрын

+Ethan Leroux Yes , I am working on a new video now...

@EthanLeroux101epicplayer

8 жыл бұрын

awesome can you do one about scr0apping a ps2

@MiketheScrapper

8 жыл бұрын

+Ethan Leroux LMAO...funny you should say That.I do have a scrapping video Game systems coming up....

@EthanLeroux101epicplayer

8 жыл бұрын

nice!

how much steel bits can be on aluminum like the flywheel from your mower scrap, did it have steel insert? would that still be ok if it had? specifically i have a few dirt bike aluminum swingarms. they have steel inserts at the pivot. do i have to remove those? thanks

Hey Mike how long would it take you normally to dismantle one of those pumps? And how much do you get for them untouched?

@nicolaschu9599

8 жыл бұрын

+Mike mac the untouched weight would be approx. 15-17 pounds plus the plastic and wire. That would be about $1.60-$1.70 according to current motor prices. Personally, I would just clip the cord and scrap the motor "untouched" and I would probably make about $2

@MiketheScrapper

8 жыл бұрын

+Mike mac took about 20 min to tear apart.

@MiketheScrapper

8 жыл бұрын

+Nicolas Chu yes...That is what I do

what happen are u still making more vids ur making me more smart by scrapping

Could you more more videos

@MiketheScrapper

8 жыл бұрын

+Chris Jensen Working on new ones now...

The one about secrets to scrapping

@MiketheScrapper

8 жыл бұрын

+Tom Williams Oww. Look at my website

Thanks for the info and keep those great videos comeing,I learn something from every one I watch.

Thanks Mike. Great video as allways.

@MiketheScrapper

8 жыл бұрын

+Dutch Scrapper Thank you for watching

great video.!!!! missing you...thanks you come back..cheers from westchester county....

@MiketheScrapper

8 жыл бұрын

+Claudinei Santos I am back...Hoping to have enough material..

thanks for the video and the advice.

@MiketheScrapper

8 жыл бұрын

+william mcquiston You are welcome

Hey Mike. When Jackshmuc came back after many months of no videos he had long hair and a crazy beard! I figured you would do the same lol! Glad your back. My scrapping business has blown up. You started me on this journey years ago. Thanks. Take Care, Kerry.

@MiketheScrapper

8 жыл бұрын

+Scrapping4aDart lol... no I am not a beard guy...

@Scrapping4aDart

8 жыл бұрын

LOL!

welcome back bud. nice accurate vid to get back on here. when i have done a scrape test to check for copper and then need to drive out the "field" i take a hammer and dent in the tube where the pockets of space are and the field just drops out and its fast, "horses for courses eh? ive been asked to show how to tear down those Keureg hot beverage makers so maybe you could do the honours, cheers bud.

wow scrap prices are in the toilet. hopefully we see it come up by summer I'm hoarding all my high end stuff till prices come up.

@MiketheScrapper

8 жыл бұрын

+Danny Scrapper I hope so too...

Nice to see you back Mike,good job !

@MiketheScrapper

8 жыл бұрын

+The Urban MIner Thank you...I am glad to be back. Had to take some time off.

great video im from holland:)

@MiketheScrapper

8 жыл бұрын

+Henk de Tank you are welcome...

great video Mike we want mor

@MiketheScrapper

8 жыл бұрын

+William Popplewell I am making them now,.....

Great vid long time no see

@MiketheScrapper

8 жыл бұрын

+CATERPILLAR Yes been away for a while working.

there's a better way in my option to take the motor out of its case. the motor is held in there because a stamper "nails" the motor on to the casing. the nail would be the case. you can find these little dents in the case. then you get some drill bit and drill out that hole so that dent doesn't hold in the motor.

mike do you think bearing off the water pump worth something?

nice Milwaukee pilers

@MiketheScrapper

8 жыл бұрын

+chevymudding01 They are awesome...Hoping to find a sponsor soon.

Great Video Mike, too bad the windings were not copper eh.

angle grinder would've worked better, but sawzall worked just as good love your videos

I miss your videos!

@MiketheScrapper

8 жыл бұрын

+adamtr1121 Thank you.I will have more

Hey mike I love your vidios and also I'm a child and I scrap things myself as well lol 👨👨👨

Even though takeing it apart didn't earn much it was still a good video. I would like to know how to get your video on scrapping. Tom Williams

@MiketheScrapper

8 жыл бұрын

+Tom Williams which video?

Hey Mike: Have you ever done a garbage disposal? I tried taking one apart years ago and ended up just scraping it for the metal I couldn't get it apart .

@MiketheScrapper

8 жыл бұрын

+Crash Gordon Not yet, But I will look for one...

@crashgordon9684

8 жыл бұрын

Mike the Scrapper Thanks Mike: Take care

i like video mike it help me i do too

@MiketheScrapper

8 жыл бұрын

+Jessica Villena Thank you for watching.

@jessicavillena307

8 жыл бұрын

i look for watching. i pick up scapper too

How much is it as a complete unit sold for?

@MiketheScrapper

8 жыл бұрын

+arodyanksfan may be like $2

every one uses a Ryobi tools for scraping except Justin bieber

how much do u get as is

@corylyonsmusic

7 жыл бұрын

TheMizhollywood that's what I want to know

@DeeJayP4L

5 жыл бұрын

Price of electric motors / pound.

yo love the vid but i'm a every penny matters type i like to know penny difference in sale as is and scrap just asking but anyway you can start adding price differences in the price list

@MiketheScrapper

8 жыл бұрын

+class a Yep I understand. I think the pump may have been 20 to 30 cents more as is.

All that work for $2

@MiketheScrapper

6 жыл бұрын

The purpose of the video is to show you what is in it and if it is worth your time. I do this so it is not duplicated by others.