you guys rock! best Scooter experts of this continent!

@Scooterswapshop

4 жыл бұрын

Thanks a million!

This is the only video that has done both sides !! I could’ve find a video on the web for hours and days but thanks y’all deserve a like and subscribe

Love how you give in depth explanations. Giving a why it's done like really helps people understand things better. Good job guys

@Scooterswapshop

3 жыл бұрын

Thanks make sure you are Subbed for more vids!

Wow this saved me hard, by far one of the best tutorials and just another reason I only buy from you guys!

Great video - both sides - very helpful.

Super helpful video! Does the outside diameter of the oil seal need to be lubricated?

Thanks for good information, very good guide

Thanks, just learned something new

@Scooterswapshop

2 жыл бұрын

awesome!

What size internal c clip does it take? 1 5/8?

Very helpful. You answered the 3 questions I had. #Pro 😎

It's impossible to over state how much easier it is working on scooters when you're working at waist height instead of lying down

@Scooterswapshop

3 жыл бұрын

Hahah yeah it helps!

Excellent tutorial guys! The info is much appreciated. I am looking to order a crankshaft, seals, and bearing kit for a 96-97 Piaggio Typhoon 50. Also a new clutch and bell. I see that there are variances from pre 98 engines to post 98 (hi-per 2) when it comes to variator parts. Im curious if i can use the readily available Polini crank you have for sale and if it will fit the older (TECH1M) stamped case on my 96-97 Typhoon and will my variator fit and shim up the same. I only ask because i hear that the variators are different and i wasnt sure if it was the crank taper profile (shaft size actually) that created a need for a different variator. Thank you much and ill be ordering from you guys.

@Scooterswapshop

4 жыл бұрын

For detailed stuff just send us an email and we can work you up a parts package

@07zx14White

4 жыл бұрын

@@Scooterswapshop Excellent....ill be there. Thank you

Awesome video

@Scooterswapshop

2 жыл бұрын

cheee

Not sure whether you guys are still responding to comments, but what's the depth that your seal installation tool pushes to? Can you provide dimensions for that seal driver tool? I can't find the tool on your website now, nor can I find any information on what that measurement is. I'm trying to do a variator-side seal on a 2005 Yamaha Zuma 50.

@Scooterswapshop

2 жыл бұрын

we don't offer them any more as the cost to make vs what we can sell for didn't line up. didn't sell enough to raise the price.

Very good video is this the same for Yamaha aerox ? Could you reply please

@Scooterswapshop

2 жыл бұрын

Yes

do u know how deep the seal should seat on piaggio on the ignition side cuz there is no any indication or line.

@Scooterswapshop

2 жыл бұрын

would need more info to give you a answer and photos

Hi. I need to change the thing in my Aerox. I failed twice.. It seems to be easy, (i use the secret trick) but i cant do it by first time and then the seal is fucked up. Can i use Polini Grease? Because with thin 2t oil it doesnt go well.

@Scooterswapshop

3 жыл бұрын

change what thing?

I have a GTX/Jog....cant start it and only 40PSI...rings, cylinder, gaskets, carb boots etc all ok....the only thing I haven't checked are the oil seals....is it possible to lose that much compression from bad seals? Would the stator side seal be more likely to be causing low compression? Thanks

@Scooterswapshop

3 жыл бұрын

how are you checking that? we have. pressure test kit

@gregheidler4227

3 жыл бұрын

compression pressure guage in spark plug hole

The best video ever made! . . Also are there any weak spots in the engine? (like starter clutch rattling because its dirty) :)

@Scooterswapshop

3 жыл бұрын

what exact motor are you asking about?

@thehypernator5851

3 жыл бұрын

minarelli horizontal

Hi scooterswapshop I want to build my 2 stroke scooter I would like to buy everything from you guys what would you recommend me to get first I want to get parts this is the number under my cvt transmission QJ1E40QMB-4 right know is all stock parts in it please let me know thanks and nice videos i always watch them good job 👏

@Scooterswapshop

2 жыл бұрын

call the shop!

Hi my scooter doesn't do wheelie what do I need to upgrade ? Or change :)

@Scooterswapshop

2 жыл бұрын

have you watched the wheelie video??

How do i know if I have to replace them? I have a Kymco Fever II and it is very similiar

@Scooterswapshop

4 жыл бұрын

You’ll have symptoms of air leaks, trouble tuning and lean

@adxo

4 жыл бұрын

@@Scooterswapshop thanks, really useful video

Pls make a video how to tune a cvt for honda dio with final speed gears..mallosi 80cc and v8 pipe Plsss I'm.over it

@Scooterswapshop

4 жыл бұрын

We have several videos on cvt tuning. They don’t make a 80cc for the Honda dio.

Hy guys, I have a question, if my scooter looks like its not idling correctly, may it be because of old seals? Thank you

@Scooterswapshop

Жыл бұрын

It’s possible. You need to do the basic troubleshooting first

Can anyone please tell me whats the size of the circlip that holds the variator side oilseal?☹️

@Scooterswapshop

3 жыл бұрын

Not too sure what exactly you are talking about if you email or call the shop i'm sure we could get the part sent to you!

good video 👍

@Scooterswapshop

2 жыл бұрын

thanks!

So i have a 89 jog. Would it be about the same?

@Scooterswapshop

4 жыл бұрын

Yessir

@shaneparker246

4 жыл бұрын

So if goin bad will it smoke? I need that tool have a link?

Woah I didn't know the seals on it could take a c-clip 0_0 That's all the excuse needed to add in a small turbo. The clips should help it hold in another 5psi. Now, will a 90/100cc 2 stroke be enough to drive a Vz21? That's the question.

@Scooterswapshop

2 жыл бұрын

turbo on cvt scooters just don't mix we have tried it doesn't make enough boost

Hi guys could you share the dimensions of the driver tool? I was thinking of 3d printing one from ABS or Nylon

@Scooterswapshop

3 жыл бұрын

We sell one for really cheap!

@56chevyguy

3 жыл бұрын

@@Scooterswapshop I wish I knew that when I ordered the seals, I got the flywheel puller.

@Scooterswapshop

3 жыл бұрын

@@56chevyguy simple search on our site you will find it. We just did a video on tools even!

@56chevyguy

3 жыл бұрын

@@Scooterswapshop I see it all now, I guess I should have watched the other videos.

Is this what’s causing oil leak ?

@Scooterswapshop

Жыл бұрын

Hi there is no oil Leak

Is that yamaha jog

@Scooterswapshop

4 жыл бұрын

Zuma

nice video +1

@Scooterswapshop

2 жыл бұрын

thanks

who tucks like that

@Scooterswapshop

4 жыл бұрын

Jared. Can’t contain him :)

@wsmaga

4 жыл бұрын

The old schoolers in Hawaii. That's known as the local boy tuck.

Crankseal2020

@Scooterswapshop

3 жыл бұрын

ok

actually we wanted to see how to clean the bearings

@Scooterswapshop

3 жыл бұрын

You don’t clean the bearings you replace them

@dongerramarco9617

3 жыл бұрын

@@Scooterswapshop thank you for clearing this up i will get new ones 6:10 confused me but thank you! I

🔨🔨🔨🔨🔨🔨🔨

@Scooterswapshop

2 жыл бұрын

hammmmmmma

Removing seals, caveman style :/

@Scooterswapshop

4 жыл бұрын

This is how 99.9% of home builders will do it. We have a spiral seal style puller