I have a 2020 Misano number 35. About to put a Graves exhaust on and found your video. Thanks for posting. Looking at how you dealt with the servo cables and motor was what I was looking for.

@LonestarMoto

2 жыл бұрын

Hope it helped you out!!

Got my #62 misano last months planning same exhaust it’s a beautiful bike

@LonestarMoto

3 жыл бұрын

I love mine, congrats on yours!!

Thanks for the great vid. Do you get a check engine light after the upgrade and do you need to flash ECU?

@LonestarMoto

Жыл бұрын

No I just left the servo motor plugged in and it was all good

@East_Performance

Жыл бұрын

@@LonestarMoto Thanks. Have you encountered any issue so far like oil leak or something? I'm looking to buy a 2021-2023 RSV4.

Hi very nice bike of yours, Well just got my new tuono factory 2020 the last one in Ontario and planning to replace my exhaust, the question is did you get any engine light after installing the new exhaust or any issues

@LonestarMoto

3 жыл бұрын

I didn’t but I left the servo plugged in just removed the cables

Sounds so good 😍😍😍😍😍😍

@LonestarMoto

3 жыл бұрын

Thanks you, I love it!!

Nice👍👌🤘

@LonestarMoto

3 жыл бұрын

Thank You.

I got my #6 Misano 3 months ago and a steal with the full akra exhaust system but one thing I do not understand why are some with black rims vs some with red and haven’t found anything on it

@LonestarMoto

3 жыл бұрын

Nice with number 6, I’m not sure in the wheels I haven’t seen anything on that I will research it but to my knowledge they were all black.

@ryanlowe2808

3 жыл бұрын

All Misano’s came with black standard wheels. In 2020, nothing had red wheels as far as RSV4. Prior years RSV4 RR/RF had red, some forged aluminum like the RF (looks anodized) and RR’s had standard powder coated red. Other later years the Factory had forged aluminum in gold.

Best beginner bike !

👍 Awesome! So you can just leave the servo motor in place without the cables and not get a code???

@LonestarMoto

Жыл бұрын

Yes that is correct.

@TheChaz81

Жыл бұрын

@@LonestarMoto Hell yeah! I've been looking for a solution to this problem. I had people tell me to forget the slip on you can't do it, or you can do it but I need an $800 code, or it can only be done by some dude named Luigi in Italy! This is awesome!

Great work bro but am going to get any lights on the dash?

@LonestarMoto

Жыл бұрын

No

@propro3183

Жыл бұрын

Thanks bro i bought my new but my friends keep sayin just sell it or trade it they have many issues

will the check engine light even come on if you don’t remove the servo?

@LonestarMoto

2 жыл бұрын

My light has never came on!

I have the #13!Just installed the SC-Project. It is insane how loud it is.... it shoots flames when shifting. I am not an expert but it is like having straight pipe right? the diameter of exit is to wide.

@LonestarMoto

Жыл бұрын

They sound so good with the SC-Project exhaust.

@dillionkenny4370

Ай бұрын

That’s my favorite number! If you ever decide please remember me and let me know! Would love to own it! 🤙🤙

For after market exhaust you need servo for not service lights?

@LonestarMoto

2 жыл бұрын

I pulled the cables and left the servo so I don’t have lights!!

An can I just buy the SC slip on an use the old pipe? Or do I need to buy the link pipe how it comes when bought ?

@LonestarMoto

2 жыл бұрын

when you buy the SC it comes with the muffler and pipe

Any warning or check engine lights due to the servo disconnect?

@LonestarMoto

5 ай бұрын

I removed the cables and left the servo motor plugged in, no lights at all

It’s the best looking exhaust period, however, it’s so highly copied now by Chinese companies, they are making near identical pipes and cans in titanium now, and for under $200 total. I actually ordered a pipe to see one, and a carbon fiber can, and they are identical matches to the real deal. It’s crazy! My point is, I hope soon SC Project changes something, every so slightly, just to be safe. I want this exhaust!

@LonestarMoto

3 жыл бұрын

its crazy how close they can get for the price of the cheap knockoffs

So you don't need a servo delete chip? There is no error lights on the dashboard?

@LonestarMoto

Жыл бұрын

Pull the cables and leave the servo motor plugged in, zero issues

I just put the new exhaust on my RSV4. I kept the servo cables attached, but zip tied out of the way just in case I wanted old exhaust back on. Now, the servo motor keeps blowing a 5A fuse that causes my display to not coke on and the emergency lights come on. Do you know if removing the cables would fix that issue? With the cables attached still, would it be causing too much power draw?

@LonestarMoto

Жыл бұрын

Take off the cables

@AstroKG

Жыл бұрын

That fixed it right up, thanks!

Hello Fellow Misano owner, I also got the 18/100 and also planing to install a SC exhaust same u got with mesh exit. My question is did u upgrade your esu? How was it look like u just installed and take that cable out. Please advise. Thank you 🤙🏼

@LonestarMoto

3 жыл бұрын

Very nice. I would prefer the exhaust with the mesh also but I didn’t want to wait 2months to get this, I did not upgrade my ecu I bought the Bren tuning programmer to flash it but haven’t done it yet.

@restie_s

3 жыл бұрын

@@LonestarMoto I see, good to know I’ll check your video on that program. Thanks

hey! about to get a 2022 rsv4 and have a sc project exhaust on the way! did you ever get your ecu remapped??

@LonestarMoto

2 жыл бұрын

No I never did unfortunately

@dustyshearon5400

2 жыл бұрын

@@LonestarMoto do you suggest it? and if so how would i go about finding someone to do that?

@LonestarMoto

2 жыл бұрын

@@dustyshearon5400 with just a slip on its not a have to!! but if you want to remap it then AF1 here in Austin is the place.

@dustyshearon5400

2 жыл бұрын

@@LonestarMoto i wish i was closer! i’m in nashville TN and that’s quite a ways away lol, sorry for all the questions but have you figured out how to keep your dash in dark mode? or does it just change with time of day?

Did you get race ECU or keep stock ECU wit the SC project exhaust ???

@LonestarMoto

Жыл бұрын

It was stock ECU, I was going to do Race ECU if I had kept it

I had a 18 rsv4 , rear sets are the same I have a 20 factory and the rear sets are different They rear sets on that 20 looks like my 18???

@LonestarMoto

2 жыл бұрын

17-20 rsv4 have the same rearsets

@tnelliott2447

2 жыл бұрын

@@LonestarMoto I had the 18, rode the 19 and own a 20 Different rear sets Now maybe the 1000 19 and 20 have the same as the 17 and 18 But the 1100 on the 19 and 20 are different Because I couldn’t get the same low mount exhaust I had on the 18 Because the rear set was different I’m guessing if my mistake yours is a 1000? And not the 1100 If so my bad Ride safe

@LonestarMoto

2 жыл бұрын

Oh yeah I have the 1000 I’m not sure about the 1100

How many km did you put on the bike before upgrading the exhaust, I have a 2020 and people are saying to wait until I put about 1000km upgrading the exhaust. Also is it safe to upgrade the exhaust and not getting a tune 🤔

@LonestarMoto

2 жыл бұрын

I put it on almost the first day having the bike, for a slip on you dont need a tune but if you can afford the get the ecu flashed I would go ahead and do it just for the power gains, my bike runs exactly as it did when it was stock.

@grayindustry5194

2 жыл бұрын

@@LonestarMoto thanks my man, I really appreciate it. I guess you will get an error code only if you disconnect the module that opens and closes the valve?

@LonestarMoto

2 жыл бұрын

@@grayindustry5194 yes thats why I just left the servo motor plugged in, I do intend on getting a servo buddy, just havent done it yet.

@grayindustry5194

2 жыл бұрын

@@LonestarMoto awesome, thank you once again. Looking forward to more videos. Great videos by the way.

@LonestarMoto

2 жыл бұрын

@@grayindustry5194 thanks man, do you follow my instagram, I need to post a video on why I havent been riding very much.

aren't those exhaust flaps used for engine brake control?

@LonestarMoto

3 жыл бұрын

No it’s to create back pressure at lower rpm for torque

@kruan2661

2 жыл бұрын

@@LonestarMoto then you lose back pressure on low RPM?

@LonestarMoto

2 жыл бұрын

@@kruan2661 I’m not an engineer but if it was that important show me any arrow, sc project or Akra system with them!

I do have 73/100 with akrapovic exhaust

@LonestarMoto

3 жыл бұрын

73 is a good number, I wish I could have found 20

@adrianfelix1456

2 жыл бұрын

@@LonestarMoto I had the chance to buy number 20 in san diego.. i have #82

@adrianfelix1456

2 жыл бұрын

Did the check engine light come on after install? Ordering mine now off the link you shared!

@LonestarMoto

2 жыл бұрын

@@adrianfelix1456 no but I left the servo motor plugged in

@LonestarMoto

2 жыл бұрын

Dang I want number 20 lol

Where can I buy the eliminator you mentioned so no check engine lights come on ?

@LonestarMoto

2 жыл бұрын

give this a try www.healtech-electronics.com/products/ese

@LonestarMoto

2 жыл бұрын

Honestly you really dont need this, just remove the cable from the servo motor and leave it on.

@boston05011

2 жыл бұрын

So the check engine light won’t come on?

@LonestarMoto

2 жыл бұрын

No sir!!!

@boston05011

2 жыл бұрын

@@LonestarMoto ok thanks. Other question. On the SC slip on. Can I use it with the factory pipe link pipe? Or when I but the SC it comes with the link pipe?

You got rid of the bike?

@LonestarMoto

Жыл бұрын

Yes but I regret it

@ralphpowell4155

Жыл бұрын

Wow, beautiful bike. I ride a 2017 Tuono. Found your vid because I’m about to install an arrow exhaust. Your video is great by the way. Why did you get rid of it if I may ask.

@LonestarMoto

Жыл бұрын

@@ralphpowell4155 A few reasons, first I had bought it in Cali and had it shipped here and was having hell getting the correct paperwork from the state of California, second I really just wanted something new, I get bored easy.

I have #74

@LonestarMoto

3 жыл бұрын

Thats awesome, I need to make a facebook and group for them

@yeezollop8608

2 жыл бұрын

Hey ! I’m currently looking at #74 debating about picking it up, was the bike well maintained ? Thanks In advance🙏🏼 just wanted to know alil more about previous ownership

Drop the tools and step away.

@LonestarMoto

Жыл бұрын

?