Sbach 300 Aerobatic RC Plane DIY
Тәжірибелік нұсқаулар және стиль
How to make XtremeAir Sbach 300 (XA41) RC Plane scale model (full scratch build video tutorial & maiden flight (need a real 3D aerobatics pilot, not me😝).
Materials: 3 & 5mm extruded polystyrene XPS foam (Depron), 4x4mm balsa spars, 2mm carbon rods, aircraft plywood
Wingspan: 1 meter (39,3")
Flying Weight: 346 g (12,2 oz)
Specifications, list of electronics and other parts + PDF/DXF plans: numavig.com/plans/Sbach-300/
P. S. Sbach 342 is the same RC plane but with a larger canopy
Пікірлер: 173
Спасибо за видео! Профессионализм изготовления моделей ростет раз за разом!
The "like" you received, but laser cut foam, who have? Few people.. Nice work by the way!
*Perfect, Perfect, Perfect!!!*
Очень здорово! Сначала глаза не верят - что этот изумительный самолет был сделан дома из потолочки! Сразу видно настоящего мастера, удачи в этом хобби
Some unexpected solutions to common problems on builds. Brilliant! Thanks for the share.
His every video inspires me to upgrade my building skills And then I get snapped back to reality when i am not able to find simple materials which would make the build more easier for me😭😂 (Amazing work, as always!!!)
Excelente trabajo, muy minucioso, me encanta tu diseño estructural para darle rigidez todo el fuselaje, las consideraciones del peso, todo es un planeamiento de cada empalme qué me deja asombrado sobretodo tus pestañas guías para hacer coincidir todas las hojas, congratulaciones.
glad to see NumaVig is still uploading! you're doing a good job at it!!!
If there were multiple likes on KZread..it deserves so many !
Your skill is simply amazing!!! I have built scratch builds out of foam kits and they do not look anywhere near this good!!!
Your homemade box and take outside the beautiful model like it comes from a factory, that deserves yet enough a positive rate ! You already made a kind of extra300 in the past, hard to fly, I guess this one is awesome 😎
Your stuff is getting better and better man, like in leaps and bounds. I work on real world Corporate jets and airliners, I would love to see a PC-12 and then a bizjet or airliner I can provide all info and reference info you need - PC-12 is a must though dude! The sound of that super crisp lightweight depron is something only a builer can appreciate, I can enjoy your video even just in audio I love that sound so much.
Magnifique travail, très, très propre et soigneux dans la technique !👌👌 Vraiment bravo 👏👏👏
Круто, доступно, понятно, уважение к таким видео.
Very nice building, congrats ! She's a beauty
Truly awe inspiring!
Очень круто! Есть новые решения, как отливка кабины и т.п. Так держать!
Spectacular, really enjoyed!
КЛАСС! я когда делаю пенолеты, печатаю все чертежи на самоклейке наклеиваю вырезаю а потом отрываю. ооочень удобно!!! обычно использую потолочку. беру пару пачек взвешиваю и беру самую легкую. ну и у потолочки есть слой!!! это очень важно. пускаю его вдоль консолей и фюза. на много жостче получается. лонжероны из канцелярских линеек. и фанеру не использую. плохой материал. вспененный пвх лучше. спасибо за супер самолет!!! мягких посадок.
I like how u build it like a factory made model, ready to ship in a box😄
love your construction skills and building technique! Thank you also for the long built video! she seem to fly very good !
Great build and great looking model I like it a lot 👍
Высший пилотаж! В начале ролика подумал: и где DIY? Фабричная сборка). Вам бы еще аэрограф и 3д принтер (местами, лично мое мнение)).
@vdm7776
9 ай бұрын
Особенное, когда коробку открыл... Думаю, все, пропал летучий DIY
fantastic job with big skill, thanks very muth to share this nice build with all this tricks 👍🙏
Brother, you have a big balls. Congratulations!
Excelente trabajo!
Great piece of work by very patently. Thanks
I really enjoyed wathing it! Good job
Wauw 🎉 nice design and work! And - yes I fell for the trick intro. The beginning had me wondering 😂😅
this is a perfect Job man. i love it.
Excellent Work!👍
Man I just wish I had the lazor cutter, and 3d printer equipment, I would be making all kinds of different aircraft, and putting together kits for people to buy, and making money boocoo money, and doing something I really enjoy diy scratch building scale aircraft and having soo much fun doing it!!!... nice technic cool build bro!!!
Great techniques!
Incredible work my friend
So much effort and skill invested into this... but given this method of construction and the place where you fly (and your flight skills :) I predict it to be completely worn out after 10 flights....
Great skills!
Замечательно получается повторить. Видео прекрасной разработки. Настоящий режиссер-экскурсовод. Спасибо. Удачи в продолжении
การออกแบบที่ดีมาก สวยงาม
Man I love your videos 😊
Great job. You are the best. Could you please make a Hughes H-1 racer? I think the lines are very beautiful and the flight characteristics are stunning. Thank you for the great effort of entertaining us.
Stunning build, using techniques from much larger rc planes. Very inspiring. Than,you for doing this video
parabéns amigo seus videos são muito top!
I make Rc planes too. It is very satisfying and relaxing. And i love how you make those very cleanly. Lovely channel and series. Why dont you make a RC Yak-9? (Nice throw at the start)
You really stepped up your game on this model. Fit and finish are excellent! I think it's good to progress and I understand the pay wall as well. Wish they where still free but that's the way it goes. Keep up the good work.
bon travail : voila
I thought they had sent you something for review, looks really smooth
Great job,congratulations😍😍😍
Superb !!!
amazing 😱
whaouuuuu veryyyy cool
Очень нравится что самолёт полностью разборный 👍👍👍😉
@taxizztop6052
9 ай бұрын
Где полностью? Крыло же цельное.
Good job
Bravo 😍😍
Я сам сделал самолёт, но твой намного круче. Ты всё так аккуратно делаешь!!
Спасибо. Смотрю
very very nice
Absoluty Fabulous😁, mayby the next model you can make a glider??
Showww!!👏👏👏
master ❤
Спасибо за обучающие видео и вашу помощь! когда появится поликарпов i16? Я пытался его построить, но не смог найти никаких руководств или надежных планов.
The cuts you make with knife are so clean and precise ! How often do you replace the blade/knife ?
👍👍👍👍👍. very nice 🥰🥰🥰🥰
Im going to build a dollar tree dumpster version of this airplane out of their foam board way to much hot glue and scavenged electronics out of crashed drones and airplanes. Thanks for the inspiration ✌️👍
Where do you design the 3D plans of your models ? because they look awesome !
@marc_frank
9 ай бұрын
i think he uses blender
That’s really cool, I am thinking of doing it with balsa and covering. Do you think this would work?
@NumaVIG
9 ай бұрын
covering with what?
What's the foam glue that you are using that looks contact. I like how it flows
круто. ещё и из потолочки.
Thanks for sharing typur building techniques. Have you also used the diode laser to cut the gray EPS /depron?
@NumaVIG
9 ай бұрын
kzread.info/dash/bejne/iaefmtl6f6XLhpM.html diode laser doesn't cut white and blue foam
@dansam1395
9 ай бұрын
@@NumaVIG any recommendation you can give us? Couldnt find it at bauhaus/obi. Only the floor insulation inlay… thanks for sharing any source you might have :)
@NumaVIG
9 ай бұрын
I don't know what and where is sold in different countries, ask on your local modeling forum
It came brand new pre installed with a frsky reciever?? Never seen that before
Whaou !
eres un crak
Incredible Plane! What about building a Gamebird1?
amazing , better than from Multiplex
Cara kerja yang bagus dan rapi
Это круто👍👍👍👍
Класс, я сейчас як54 делаю, хотел также с крылом сделать чтобы снималось, но наверное не получится, так как оно у него почти по центру фузеляжа, прочность будет никакая
Hello, could i ask if you would do atleast the plans for an A-1 (or similar) Skyraider??
СУПЕР
👍👍👍👍👍👍
Ich bin begeistert von Deiner Kreativität. Kann man diesen Plan als DXF auch einzeln erwerben?
@NumaVIG
8 ай бұрын
link in description below video
Hola buenas para cuando un yak 54 xl ? 😅😅 quiero cogerte el de este vídeo pero me encantaría el yak gigante jjjj un saludo eres un crack
Bellissimo...!
Hi, in what program do you cut the skin, and the skeleton of the model itself?
Buenos días hermoso trabajo estoy empezando como aeromodelista tengo una avioneta cessna y me gustaría aprender hacer aero modelos donde puedo aprender y conseguir todos los materiales un saludo desde Bogotá Colombia Muchas gracias por su comentario
Can you make a normal passenger plane please 🙏❤
@soliv27
9 ай бұрын
A Beechcraft King Air 200 I would appreciate!
@gsxeddexsd9192
8 ай бұрын
*normal
@bochralmalki9470
7 ай бұрын
تحبطيني. For
Круто! Ничем не обтягиваешь? Ни скотч, ни другие плёнки. Почему такое решение? для снижения веса?
@NumaVIG
9 ай бұрын
будь у меня один самолет и летал бы на нем каждый день, то обтянул бы конечно, а так лишняя работа, лишние 35-40 г. да и на солнце бликует
Great Job. Only one question. How to built the Canopy? Thx for joining your expirience to us... 👍🙋♂️😁
@NumaVIG
9 ай бұрын
35:37
@Dave-hq7zq
9 ай бұрын
Wow. So sorry. I missed it. Great Job and thx for the very fast answer.
it took you to make laser cutting, a lot of gluing and etc... Why not a balsa??
where exactly should I attach the part in the middle of F and G? the one with balsa piece (3:30 in the video) do I just eyeball it? or does it have it's own specific spot?
@NumaVIG
5 ай бұрын
you must choose the location depending on the size of your receiver and servo mount isn't balsa but birch plywood
@dajacob9066
5 ай бұрын
Yes I meant plywood, idk why I wrote balsa, thank you
bonjour. Les plans de vos avions ne sont disponible que part abonnement?
Is there a way to order the parts (already cut)?
Уровень станков уже)
Top speed
why you not recommend Tetan while glue
👏👏👏👏👏👏 👏👏👏 Brazil
What glue did you use?
O amigo boa noite como é que a gente tem acesso essa planta Extra300
Здравствуйте. А какие губки при тампонировании использовались?
@NumaVIG
9 ай бұрын
поролоновые спонжи для рисования
@user-yw9hb5ix6p
9 ай бұрын
@@NumaVIG спасибо!
Выдает ошибку доступа к сайту, при переходе по ссылке, для покупки чертежа. Есть другой способ приобретения ?
If only we could get these 3mm and 5mm XPS foam sheets in the USA without shipping from half a world away. I think they were banned from normal use in the US for environmental reasons.