25 years ago we did 2 12” pioneer free air in a Beretta. The baffle was across the entire back seat rest. It hit real low with that big trunk.

@jaz97

Ай бұрын

You had me at Beretta LOL so 90s love it!!

@grandam

Ай бұрын

I did this in the late 80s (1988) 2 Pyle Driver 15s on Punch amp in a 1980 Oldsmobile Delta 88 4dr sedan. Stupid big trunk.

@BudgetBassHead

Ай бұрын

I also loved the Berettas. They were definitely one of the coolest car back then.

@odogrollin

Ай бұрын

If you decide to do infinite baffle again, my suggestion would be too frame out the opening of your trunk. That way you can mount your baffle to it. You will get significantly better bass response, and that s p l number will come up significantly

@jimbobdobbs1597

Ай бұрын

​@@BudgetBassHeadmy mom had a grand am and as much as i hate pontiac, i would buy one (acoustically) today

That is not infinite baffle. You have to completely seal off the front wave from the back wave, the side with the towels and the amplifier gap is not sealed, and then the deck lid is not sealed either. Best results would be to completely seal the baffle and run with the truck open for true ib, this is just free air. I do like the videos and style of testing you do. You always keep things interesting and fun to watch with videos like this!

@jeffunrau3958

Ай бұрын

This is free air not IB

@Alkatross

Ай бұрын

This is not free air. It's a leaky infinite baffle

@jt9264

Ай бұрын

Yup, not an IB setup, losing a lot of performance from that opening on the side

@jacobkelly7502

Ай бұрын

he knows that. He stated that in the video. told us its not a finnished product up front.

@jt9264

Ай бұрын

@@jacobkelly7502 his last trunk setup as well he called a IB which was finished for his 18” skar sub

I dig it 👍🔊🔊 Only thing I would suggest to add would be some pool noodles around the edges to seal better. I've seen a couple of builds that use pool noodles for cheap way of sealing gaps. Thanks for the videos.

@BudgetBassHead

Ай бұрын

Thanks for the tips!

The sdr's are probably higher 'q' drivers than the evl's are. You need kinda higher 'q drivers for free air subs

I like the Battlefield theme, brings up memories. Nice production, from all the boxes that can be built, IB is the least $$$ in terms of material, but renders the trunk of a daily useless....and probably loss of 3 seats. In home audio IB sounds shy on bass, but cabin gain does wonders. Great video. P.S. As I have written before, get that SPL meter out of the foot well, bass-waves are long for a car, but stuff in the cabin reflects differently, so get it close to head high, not on the window, but close to head high. P.P.S. I almost mixed IB and OB, IB requirements for a wall of 2x18" in a trunk has maybe 30% of size required for baffle size, the trunk cutout is severely smaller than what an IB requires, bass is still longer than car, so you can use trunk as a box, making it OB, which 18" love as sealed boxes using the trunk volume. IB has a huge WxH measures baffle depending on speaker size. With all the losses you have a 4-6BP box with or higher order, depending how sealed the car is.

@BudgetBassHead

Ай бұрын

Good suggestion thanks for sharing.

Another good one!! I like how you give alot of clear details on everything you're using

@BudgetBassHead

Ай бұрын

Thanks I appreciate that 💯

Wow I am so stoked to see this - we have asked, and you delivered!!!

@BudgetBassHead

Ай бұрын

💯👍

Sounds hella dope brother!

Pretty good spl results for freeair!

Boy oh boy I remember this from back in the days..This brings back some memories!!👊😉

@BudgetBassHead

Ай бұрын

🔊 The 1990s ruled! 🔊 💯

Im so glad you did this thank you.

Last year I built an infinite baffle subwoofer setup in my old 2000 Toyota Corolla, with a twist. I used eight 6.5” 8 ohm woofers from PartsExpress that were $8 each. They were ran off of a D4S JP8. The baffle was completely sealed. I used aluminum duct tape to seal holes and a little spray foam here and there. It had useable output down to 30hz with output going down to 25hz, but it was dropping off really fast at that point. It sounded like a couple of cheap 10” subs in the trunk, but took up zero trunk space. I’ve got a video on my channel showing it.

I run a single evl 18 and I love this! thought about doing one at the height of my backseat maybe a little lower, that way when the hatch is closed its 'sealed'

I’m elated to hear Xavy Rusan in IB. Great project.

@BudgetBassHead

Ай бұрын

Good to hear!

I had an 88 Mazda sedan with 2 10 and 2 8 pioneer free air subs on the rear deck powered by Profile amps 300 watts each. At the time it was very good and loud enough to be my work car for years.Love your video, looks like you need to seal the area on the sides as much as possible,a better center brace would help you too. Love that amp power,I have an sdr 18 in a sealed 3.0ft box in my home theater!

I'm running two 18" Peavey Black Widows IB with a front sub in the glove box area. 2005 Ford Focus. I would like to try a ported setup but IB just sounds to good. So fast and accurate. Esp. when it's t/A (time aligned) When I watched one of Matt Bogardt's videos (of Image dynamics); he said to build an IB baffle with five sides for strength. So essentialy an enclosure without the rear panel. I just built a super stout baffle and used 3/4" hardware to secure it directly to the car. There is little to no vibration. It's so musical it's really hard to go back to boxes. I'll admit I do miss my wall.

@BudgetBassHead

Ай бұрын

That sounds very interesting.

this is the most powerful and well sounding setup you can do, unfortunately it's difficult to brace and seal the trunk well, and to get the best sound you have to open the trunk

Give the One Audio IB3's a go in that setup!

@BudgetBassHead

Ай бұрын

I'll look into it

Ive done this many o time in my life. Bass was smooth, but was never satisfied. Thats just me tho. Great tutorial as usual! Thx

Lets see the hometheater setup👌

I need to try an 18 in my setup. Just for fun!!

Thanks for everything you do , it means more than you’ll ever know… I like that song you played

@BudgetBassHead

Ай бұрын

Thanks for watching. That song comes from Epidemic Sound

Youre funny my dude lol... the Fs of the driver is going to be your peak in IB

If you have any scrap 2x4's you can clamp the mdf in between a couple and you can get away with less clamps also.

@BudgetBassHead

Ай бұрын

Good suggestions

Subs with a lower fs and ebp are king for ib.

@BudgetBassHead

Ай бұрын

Thanks for the tip

I thought this was a reupload. :) Maybe change the title to "Round 2"

@grandam

Ай бұрын

I did too!!!

@BudgetBassHead

Ай бұрын

Wow. I'll look into. Thanks for letting me know that!

Nice

My peak is 33hz in my car lol. It's lovely! Does a 147.8 at 33hz, for now...

@BudgetBassHead

Ай бұрын

Wow. That sounds amazing. Its not easy to get that loud below 35Hz.

@1ohmwrecker

Ай бұрын

@BudgetBassHead I didn't know it was that good till I head some other ppl tell me what u just did lol. That's with a smart bass 5k. Hopefully maybe a big boss 8k will get me that 150! On music it bounces between a 140 and 146 or so.

@scottbe1

Ай бұрын

IB?

Had a EVL 15 ported and paired with a rp2k and it hit hard. Buried the meter at 140. Heavy as hell but it knocked ridiculous. Really wanna see the home theater SDRs.

@BudgetBassHead

Ай бұрын

Maybe I'll cover it in a future video

@vannloc7551

Ай бұрын

@@BudgetBassHead thanks bro. I'm lookin forward to it

my guy taking 90's quad bass to the next level! ok so what you running for an amp?

I'd say the EVL has too low of a Q to be good for infinite baffle. The SDR has a Qts of .69 which is pretty close to ideal. I'd also bet the SDRs will beat the EVLs in SQ (which is usually why you do IB in the first place) and probably match DB (especially down low) to the EVLs even with much less power. That is... once you get that setup properly sealed off. But yeah, not bad for just throwing a board in the trunk with some subs attached! I really want to make one of these setups in my 'stang although the PR setup I have (1-12"/2PR) is hard to beat for a small box.

Yeah you definitely inspired me on the SDR infinite baffle still wish I had the SMD tool to know how many watts on bushing cuz I have no clue I think I might be at 600 and I know I can go way more put on never be able to afford that tool is there any other tool on the market besides a multimeter do you know exactly how many watts I'm putting out

try the sdrs in the new baffle you made for the evl and seal it!

@BudgetBassHead

Ай бұрын

I think I'll do that

Did you also seal and audiomat the trunk from inside? Or does it rattle like a ghetto slab?

IB SUBS ARE CLEAN I HAVE 3 AE IB15 IN TRUE IB . ABOUT 900 CLEAN RMS WATTS IS ALL I NEED . LOVE IT'S NATURAL OUTPUT X-OVER AT 44 HZ .GREAT VIDEO.

@BudgetBassHead

Ай бұрын

Thanks for sharing.

Im curious if the IB set-up will cause u to have to use less power than the subs are raited for but as they are large the trunk space will likly meet need as an enclosure

@BudgetBassHead

Ай бұрын

Depends on the recommend volume of subwoofers.

30hz and it sounds balanced though the whole frequency range. Nice 🤔

@BudgetBassHead

Ай бұрын

It sounds really good in person

Man if you sealed it up damn that thing would be pretty good.

YOU SHOULD TRY THE SVR MODELS THEY ARE LIKE IN THE MIDDLE OF SDR- EVL

Peak freq will change with pressure changes.

@BudgetBassHead- What setup sounds the best, the SDR infinite Baffle, or the 2-12" passive radiator setup? I would have liked, to have seen, SPL scores, @ 20 Hz, 25 Hz, and you skipped over 35 Hz, with this EVL infinite Baffle setup. Great video❤️

@BudgetBassHead

Ай бұрын

Thanks for pointing that out. I would have to say that the SDR setup sounded better. The trade-off would be losing access to the trunk from the inside of the car, and back seat-down listening only.

@evilinside5984

Ай бұрын

@@BudgetBassHead - Also this Infinite Baffle setup had a very flat bandwidth, doing a 142 Db @ 30 Hz, and a 143.9 Db @ 50 Hz= very flat. I bet if you drive around playing/breaking these subwoofers in for a few weeks, then ✔️ the Db again, but @ 20, 25, 30, 35, 40, 45, 50, 55, and 60 Hz, to show how flat the bandwidth is, would be great to see. I hope you consider this, plus would be great to get your opinion, on how they sound different after being broke in.

I wonder how a pro audio sub would do? There was a nice 18 for $150 that i wanted to try a pair as an IB setup. Im sure the Ultimax would do well here. I still am not a fan of this unless its a diy buget build. But, give us your opinion on how it all sounds and how it all compares in practicality.

Whats happening fam. I got an Impala similar to yours. What do you need to add an amp to the factory bose system?

@BudgetBassHead

Ай бұрын

I got a video coming on this very subject. Easy Method: AmpPro. Hard Method: locate factory amplifier from trunk.

Have you considered testing out a single 18" with an 18" passive radiator? I know youve done 1 12" with radiator and 2 12s with radiator though. Sub forward and radiator firing to the side?

@PeterFeltersnatch852

Ай бұрын

I would also like to see a 18 and a passive radiator.

@BudgetBassHead

Ай бұрын

I may have to try that. Thanks for the suggestions

Dude we did a 148 with 4 8s ported tuned to 28hz with only 1k power..come on guys.

Thinner coil more sensitivity in sdr evl thicker coil less sensitivity perhaps

What’s the song name ?

SDR has lower Fs and softer suspension, which is probably why they sound better on music. I hate the EVL.

The baffle has to have a tight fit, if air is leaking in sides or corners. You will get less punch . Trunk is supposed to be the BOX😮

@BudgetBassHead

Ай бұрын

True

Do a video where the slot port on your box is the amp. lol

Man i wish Chevy would have slapped the 5.7 and 6.2 in those Impala id definitely have one they seem so much bigger than the ss more interior space would definitely be a classic. They let dodge take over the v8 game and the Cadillac is to much with the 6.2 but they appear to be the Impala body

Not sure if it’s just the camera but it looks like the sub on the right is moving more.

@BudgetBassHead

22 күн бұрын

Its called shutter-roll

😮

You sealed the sdr better that’s why your noticing a difference your getting a bit of cancelation.

@BudgetBassHead

Ай бұрын

You're probably right

Unfortunately if the rear of the subwoofer is not absolutely, and completely sealed off from the front part of the subwoofer, I mean COMPLETELY SEALED NO HOLES. Its not infinite baffle. Because the wave that the subwoofer creates can not be able to make its way to the front of the subwoofer. It can if there is a hole.

I wanna do a infinite baffle

@BudgetBassHead

Ай бұрын

Go for it and let us know how it turn out 👍

Your blocking the sound you should set there

🤖SQL is the way

Two 8s in Ashland or ported box would sound better than that setup.

sub look out of phase

@BudgetBassHead

14 күн бұрын

Its called 'shutter-roll'. The subs are fine.

It isnt a infinite baffle you arent sealed

You should have made this IB setup inside the car not in the truck because of low excursion. Just because the woofer cone is 11 inches and some change do not mean much. These woofers needs to be in a L-slot ported sub box or the VC will burn up its on you LOL 5000 rms watts on this means game over for the VC p.s you need to work on you basic math skills because this hobby is all about BASIC MATH work

@grandam

Ай бұрын

Put up your audio test videos......DIDN'T THINK SO!!! 🖕

@BudgetBassHead

Ай бұрын

@grandam 🤭

@Luminous.Dynamics

Ай бұрын

This guy lol

@PeterFeltersnatch852

Ай бұрын

​@@Luminous.Dynamicsby looking at his channel he seems to be worried more about the world ending soon (end times!) 🤣

@imawesomeyourenot

Ай бұрын

You really should unplug from the internet for awhile, clearly it will do you some good. Or, if you cant possibly do that, maybe try some educational videos on spelling and basic sentence construction (heres a hint: start at kindergarten). Go from there to some "basic math" courses and keep going (you can do it!), as you think this hobby is just that, and have no idea the sound physics, geometry, and multiple formulas, and calculation that are needed in a lot of actual car audio construction and planning. Oh, and as an aside, you are a crazy person. Just letting you know.