That flywheel has seen better days 🙈

A big pat on the back for doing all that in a small family garage. You must be proud

Well done for taking that on using stands , that flywheel looked done really heat soaked would have changed that too

Fair shout. But you should of replaced the dual mass flywheel at the same time as it will be as worn as the clutch plus the clutch plate surface has been well overheated. My advice would be to take the transfer box off from the start. Just some advice for the future 👍🏻

I’m really glad you’ve managed to get some more content from this little car. It’s the reason I found your channel in the first place, and still to this day it’s the most comprehensive series of crash damage repair videos for an Audi S1 anywhere on the internet. Full props to you for taking on so many challenges in a cold & tiny space with the minimum of equipment. You’ve definitely inspired me to tackle much bigger challenges that I’ve previously thought were too difficult with my projects, and when I feel like things are tough, I remind myself of what you’ve achieved in some adverse situations & conditions.

That was an epic task to undertake, especially on axel stands in a cramped garage! Well done you.

Just reaffirmed why I would never buy another Audi, well done getting through it

Great achievement doing it in a lockup on your own well done .

I’m lost for words. Amazing achievement.

I'm so chuffed for you! You really deserve a break with this project. I'm sure you have learned a lot doing this car, I have but I'll still only be confident fixing my Morris Traveller. Thanks for sharing and best regards from Ireland.

Well done bud. I’m impressed that you’ve manage to do that on axle stands and in the garage!! I’d have to have muted the volume if I had done it as the language would have been horrific 😂

Not that long ago replaced clutch on car, outside driveway...(£70) . Try doing it when you get past 60.... Even better 😊🇬🇧👍

That's a great job working on the floor 👏🏻 👍 🏴󠁧󠁢󠁷󠁬󠁳󠁿

Well done You were as green as grass when you started the channel BUT now you are not to fazed by anything & it shows as your channel subscriber growth shows

Amazing job mate. Loved the frightened look on your face. Would pay to see that again lol.

Well done that is one of the hardest jobs you can do on an AUDI 🤙👍

This Audi has been a millstone around your neck. Be glad for you once it is finished and sold.

Fair play to you mate, think how proud you will feel after completing a major job, especially on an Audi

I waited until both parts of this video were out and then binged them both! What an absolute achievement in a small garage! Top work!

This time next year you will be the next Mat Armstrong boyo! 👍

Awesome work again mate "Well Appy" with that,🥳 filming and editing is superb,some tense moments there 😳, fantastic ✌

Outstanding fella, i also done the fly wheel & clutch on my ford mondeo 2.2 . Doing the clutch was on my bucket list a was so proud i done it myself.

Well done you ! Had no doubt you would do the right thing by the car, when she moved under own power you must of heard my YES all the way from Norfolk 👏👏👏👏👏👏👏👏👏👏👏

Well done buddy I'd have no knee's or back left doing that off axel stands 😂

Well done lad not an easy job at the best of times let alone on on axle stands and in a small space like that you should be proud of yourself

Well done lad. Bad job on a ramp. Pat on the back well deserved. Don't crash it before it's sold .Lol

Mate I admire everything you do ❤

Well done, Amazing work. You have to be very proud of yourself 🎉. 😊

Your a legend mate. Massive respect for you. That's a massive job and you've done it. Your getting better and better. Keep it going fella.

Well done mate! Cracking results 👌

Bloody well done. Legend!

I owned one and i reckon that it had more than 230 bhp from factory. Did do a 300bhp remap and didn't like it so i put it back to factory. Great job!

Another great video from you mate well done you’ve done it. So real with the ups n downs keep them videos rolling….

Brilliant video!👍

Really impressive job, hats of to you. I have a 2015 S1 of my own and its a pain to work on.

Bloody great effort mate!! Was genuinely cheering when she first moved under her own power! Awesome work.

Great effort - really enjoyed following this series

I couldn't wait to see the second part of the clutch replacement. Well done on a great job

Man after my own heart absolutely love it you beat the mechanic and you got a cracking tool. Aswel just done a major service on my car in the street outside the house. To anyone who pays a mechanic £40/per hr give yourself a shake

Well done 👍 made me smile that video. Wish you all the luck. Great content

Well done mate 👍

Well done. You must be so proud of yourself. Keep up the good work. Love watching vlogs

Well done bro this reminds me of my days doing jobs like this on axle stands but now do the job in half the time with a lift

Good skills matey 👊

Awesome job mate 👏👍🏼

Well done mate!

Top Job fella 👍

Great work mate

Excellent job, well done. I bet that job has given you a lot of confidence to do future work

I genuinely enjoyed the video, we'll done great job buddy. 😊

Excellent result for you, good going for sure doing that in the garage and on the stands 👍🏼

Magnificent effort and outcome - really really well done, and hope you use the excuse of ‘taking her for a shake-down’ test to have a right good “hoon” and leave a smile on your face for months ! Keep ‘em comin’! JCHK (Told you you were in love with the Makita 😉)

much respect - well done for a difficult job - hope it sells quick for the money u want 4 it

Well done for all your massive efforts. The look on your face when she moved, Brilliant.

epic episode! well done bruv!

Just watch new video loving it keep them coming 👏👏👏

Well done good work pat on yr back for that job

Well done 👏

Buzzing for u that was a lot ov work just for the clutch mad how much stuff u had 2 take off congrats on finally getting 2 drive the car👍👍👍👍👍

A huge well done to u keep up the good work

Great video mate pleased you done it well done 👍

Cracking work so far mate

Well done pal well chuffed for you.👍 Really enjoyed it

top job there don`t under estimate yourself you set out to do it and you did keep up the great work best wishes from Swansea

Brilliant well done, m8

Epic Mission. Very well done, Took a while. But you got there by pure determination and strength. See you in the next one. Cheers,

Fair play you done a great job!! Don’t think you know how talented you are well done 👏 👏

You should be so proud of yourself, well done 👍 excellent video all the very best 👍

From Auckland, New Zealand. Really impressed mate, that's proper impressive. I have the same colour S3 but have always thought the S1 was rather interesting and it's fantastic it comes in manual. Well done, from the other side of the world :)

Great determination well done

Wow the work involved to change that clutch WELL DONE

As stated, great job well done in a small garage and on axle stands🏴󠁧󠁢󠁷󠁬󠁳󠁿

Well done big pat on the back.👍👍👍👍👍

Well done good job.

A true measure of a man is to carry on when others would give up

Well done

Well done great job

Well done mate

A massive achievement, well done, that car is part of you 👏 😊

Well done to you. You have done a great job You should be so chuffed with your self Well done keep up the great work

Well done that man as for the clutch being at the bottom of the stroke of the pedal that is correct but will do no harm to bleed the clutch again you should have no problem selling such a well sorted car waiting for the next episode well done!

Well done sir that was a big job, I would have done flywheel as well

Well done brother

nice one mate, did my first clutch recently (off axle stands) Yeah bits of it are a chew but the sense of achievement and money saved makes it so worth it!

Nice one mate, absolutely awesome job given the space available. Used to do street and lock up spannering when I was younger so props to you taking on that job in a lock up! Only suggestion would be get those bolts out the front driveshafts and give them a fresh application of thread locker. They are notorious for backing out after being loosened and then the half moon shape metal washers smash off the box and act like a lathe.

well done mate

Nice 1 mate

All I can say is, a big well done

Loved my Audi 80 TDI Hate all these fancy new car's, Old School for me..😘

Hat off to you, that was a great watch.

@RevivingSalvage

2 ай бұрын

I’m glad you enjoyed, because I didn’t enjoy doing it lol 😂

That was a big job, i was even tired watching. I would have skimmed the flywheel but hey ho. When it was done i had a cup of tea & blueberry muffin to celebrate 😀

congratulations buddy great job, and yeah you have earned the right to be proud of your work. awesome. still would like to know where you are as i'm in port talbot

Will done mate.

Well done buddy great job da iawn

Congrats well done you deserve to use it for a bit make sure you clean up the exhaust tips before installing it back on the car

Well done but I will say be careful with the impact gun as thay are very powerful and can easily overtighten bolts n nuts

well done

Great job! I would be bouncing off the walls

Nice job. What impact driver did you get?

Definitely should have changed that flywheel!