Saramonic Blink 500 B2+ Quick Start | Fast & Easy Guide to Your Wireless Microphone System
Ғылым және технология
Buy Now ➤ bit.ly/3IwCuqb
Master the Saramonic Blink 500 B2+ wireless mic system in minutes! This video walks you through unboxing, setup, navigating the menu functions, and connecting it to smartphones, cameras, and more. Learn how to adjust levels, use noise cancellation, and unlock features to capture professional-sounding audio for your videos.
CHAPTERS
00:00 - 00:24 | Unboxing the Blink B2+
00:24 - 01:00 | Setting Up with Phone
01:00 - 01:32 | Recording with Phone
00:01:32 - 01:54 | Setting Up with Camera
01:54 - 02:16 | Microphone Functions
02:16 - 02:42 | Adjusting Levels
02:42 - 03:02 | Adjusting Transmitter Levels
03:02 - 03:23 | Home Screen Overview
03:23 - 03:53 | Receiver Menu Settings
03:53 - 04:16 | Output Modes (Mono, Stereo, Safety)
04:16 - 04:37 | Output Volume
04:37 - 05:00 | Noise Reduction
05:00 - 05:23 | Additional Settings (Mute, Low Cut Filter, Speaker)
05:24 - 05:48 | Backlight & Language Mode
05:48 - 06:09 | Restore Defaults
06:09 - 06:34 | Pairing the Transmitter
06:34 - 06:55 | Version History
06:55 - 07:25 | Connecting to Different Devices
07:25 - 07:30 | Conclusion & Contact Info
Пікірлер: 43
The Left Bluelight on the Transmitter is still blinking and the output is in Mono, not stereo. I'm using it with my Iphone IOS 17.5.1. I can't figure out how to fix it. Thx in Advance!
@SaramonicUSA
Күн бұрын
The blue light on the receiver will blink if the transmitter is not on or not paired. So if you are only using one transmitter and have the other off or in the case, this is normal. You can turn on, or remove the transmitter from the case and the light will go solid. If you have both transmitters out of the case and on and the left side is still blinking, you need to re-pair the system. If you need to re-pair, watch the video linked here, it is cued up for you: pulse.ly/et8cxhumkx
How do i adjust the input gain on these microphones? The volume is too low when recorded. I have searched through the instructions PDF (which is also not CMD + F searchable) and I couldn't find it. Please help.
@SaramonicUSA
4 күн бұрын
Please watch the video here: pulse.ly/zlqm86vwrv It will show you how to adjust the levels.
Having issues. Accidentally unpaired the mics to the receiver but receiver seems nonfunctional all of a sudden as M and power buttons aren't working when held down or pressed. Mics are blinking but receiver won't turn off
@SaramonicUSA
22 күн бұрын
Please contact our support team and we will help you fast. support@saramonicUSA.com if in the US. support@saramonic.com if outside the US.
@bernardmanarin1662
19 күн бұрын
@@SaramonicUSA Sounds good. Will do now. Thanks guys
can i use these with headphones ?
@SaramonicUSA
14 күн бұрын
Yes. You can plug wired headphones into the receiver and monitor in real-time.
Is the sound produced from B2 + as same as the B2 version? I saw some reviews between B2 vs Q20 which in my opinion B2, somehow, sounds better. Thanks
@SaramonicUSA
2 ай бұрын
If you are asking about the original Blink 500 B2 system that we released in 2018, the B2+'s internal mic definitely sounds better in my opinion. If you are comparing it to the Blink 500 ProX B2, I would say the ProX's internal mic sounds better, but that is almost twice the price and has lavaliers. The B2+ does have a killer microphone and when compared to some popular wireless systems' internal mics that are $250 and even $350, many reviewers had mentioned that the B2+'s mics cound better, and I agree. I also prefer the B2+'s mic sound to the Q20. It is a great system for the money.
@DianRegina99
2 ай бұрын
@@SaramonicUSA Thanks for your reply. I used to use B2 old version. I make vlog outside and I need a noise canceling mode mic. I think I'll go get myself the B2+ since the ProX is still out of my budget 😄
Can I connect the Saramonic Blink500 B2+ microphone to the DJI Action 4 action camera?
@SaramonicUSA
14 күн бұрын
YES! Just use the USB-C adapter of the system.
can you write best adjustment levels for one person recording on quite room ? because in video is a little hard which is the best adjustment
@SaramonicUSA
Ай бұрын
There is no perfect setting for everyone because it will vary by recording device. I like to start with +4 for the microphones, and level 5 for the receiver output. This works great for my iPhone 14 in a quite room, and on the street. It will work similarly on an Android phone with USB-C. When connecting to camera I would use the same settings and adjust the camera's gain so I am averaging about -12dB on the camera's meter. If you have a particularly noisy camera preamp, I'd go to +5 on the microphones and maybe 6 on the receiver, this way I can turn the camera's gain down a bit to get the cleanest signal. I hope that helps. 😀
Can the receiver pass thru charge to my phone while using it?
@SaramonicUSA
17 күн бұрын
Absolutely. That is one great feature that allows you to film for hours.
Hi! I am considering buying this for outdoor activities. However, if the type-C connector is damaged or lost, where can I get it without having to buy the whole thing?
@SaramonicUSA
22 күн бұрын
Hello, you will love it. If you happen to lose any part of the system, contact our support team and we can send you out a replacement. support@saramonicUSA.com if in the US. support@saramonic.com if outside US.
@FauzanAtsari
21 күн бұрын
@@SaramonicUSA Thank you for the answer. I’ve bought it, used it, and I love it.
I want to use stereo mode to record stereo space, like background sounds or a car driving by left to right. Is the stereo mode true stereo do this or is it just dual mono?
@SaramonicUSA
2 ай бұрын
You could use these for stereo, but your set-up and placement has to be precise. Please see "Setups for stereo: AB" in this article: pulse.ly/nlpb2ucf4iYou could also construct a mannequin head that would hold the transmitter in the ears of the head. This might be more complicated that you want. Primarily, the stereo setting is to be used for dual mono, recording one subject to the left, and the other subject to the right. For a stereo recording, it is much easier to use a stereo recorder or mic with an XY microphone pattern, a stereo binaural microphone or head mic, or 2x cardioid lavalier mics (positioned correctly) into a wireless system. For simplicties sake, I suggest a good recorder with a stereo XY mic, they can be had for $79 and above. I hope that helps.
@rangerbaynworkshop
2 ай бұрын
@@SaramonicUSA It's not hard to record in stereo space if you have a true stereo recorder. I've done it easily many times with my condensers and tascam DR mkiii. I also used the first DJI Mic, 30 ft apart in my yard, as well as holding them in my hands and got a stereo image. I've since sold them looking for a new mic set. Sadly, this set sounds like it's simply dual mono which is not what I'm looking for. Thanks for clarifying, though!
Merhaba bende saramonic 500 pro var ara kabloyla iphome 15 pro maxe bağlıyorum fakat kulaklık olarak görüyor. Sebebi nedir yardımcı olabilir misiniz çözemedim.
@SaramonicUSA
9 күн бұрын
Bu doğru. Adaptör kablosunu kullanarak iPhone'a harici bir mikrofon bağladığınızda, harici mikrofon özelliklerini kullanmak için onu bir kulaklık olarak görecektir. Alıcının mono modda olduğundan emin olun ve iPhone'da kulaklığı seçerek kayıt yapabilirsiniz.
Can i use this with Go Pro 10 camera
@SaramonicUSA
11 күн бұрын
Yes, but you wll need either the GoPro Mic Adapter or the MediaMod. No 3rd party mic can be used with a GoPro without either of these adapters.
Hey guys, I was really enjoying using this microphone with my phone. Unfortunately it's not working at the moment, so I tried connecting the microphones to my camera (sony a7iii) instead, but the receiver will not connect to the camera. I wasn't having any issues when connecting the receiver to iphone, but it won't work with my camera, is there anything you'd reccomend?
@newheights4782
18 күн бұрын
to clarify, my iphone isn't working, and my transmitter which was working with iphone isn't connecting to my camera
@SaramonicUSA
17 күн бұрын
Please contact us at support and we will help you fast. support@SaramonicUSA.com if in the US. support@Saramonic.com if you are outside the US. Looking forward to hearing from you.
@SaramonicUSA
17 күн бұрын
Please contact us at support and we will help you fast. support@SaramonicUSA.com if in the US. support@Saramonic.com if you are outside the US. Looking forward to hearing from you.
Can I use it with dji pocket 3 ?
@SaramonicUSA
Ай бұрын
Yes. Just use the USB-C adapter from the Blink 500 B2+ and that will connect with the DJI Osmo Pocket 3's USB-C input.
Does it have bluetooth conection features?
@SaramonicUSA
2 ай бұрын
This does not connect via Bluetooth. Bluetooth would have a much lower audio resolution than the digital connections this system has via USB-C or Lightning. This system has a digital resolution of 24-Bit/48kHz, while Bluetooth would be much much lower.
help! Me compre unos y el recepto se ha quedado congelado, no me permite hacer ninguna función, alguien le paso igual?
@SaramonicUSA
Ай бұрын
Si el receptor está congelado, intente conectarlo a una alimentación USB-C y apagarlo. Luego, vuelva a encenderlo y vea si el receptor todavía está atascado. De lo contrario, realice una restauración a los valores predeterminados. Si esto no funciona, contáctenos y le conseguiremos un sistema de reemplazo rápidamente. support@saramonicUSA.com si está en los EE. UU., o support@saramonic.com si está fuera de los EE. UU.
I'm having an issue, it's probably a simple fix. When I record on my iphone 10 with 1 receiver, the video playback is only producing sound in my right ear, nothing in the left. If i turn on both receivers I hear sound in both ears but I obviously don't want to hang two receivers on my shirt during recording. Can you contact me here with a fix if you know of one please.
@nguyenbahung3602
9 күн бұрын
You go to the setting in the receiver, select Mono in Output mode and it works.
@SaramonicUSA
9 күн бұрын
You are in stereo mode, that puts 1 mic to left and 1 mic to the right. Which is ideal for mixing later in post-production. If you are recording 1 person, or just want 2 people mixed to both left and right you want mono mode. It is easy to change, please see this part of the video to show you how: kzread.info/dash/bejne/aoJpq8h-fpPAZ5s.htmlsi=8BaI-ccAH9bt4ki8&t=212
@GameKaps
9 күн бұрын
@@SaramonicUSA I ended up figuring that out but I really appreciate the quick response. If I have any other questions I’ll let you know. Thank you again.
Insted of iphone lighting give us 3.5mm jack.