So much better for me without the music, I like to hear what's going on with the blaster, I think it's the Men in the Sheds making things Mentality that we have. Brilliant Video and a Lovely job on the Truck ❤

@Mobileblaster

Жыл бұрын

I get what your saying about the music I have been trying to cut it back bit. im glad you enjoy the videos :)

Great job.

@Mobileblaster

Жыл бұрын

Thank you 😊

Super jest to o piaskowany Pozdrawiam serdecznie 👍👍👍👍

@Mobileblaster

5 ай бұрын

😊👌👍

Awesome video thanks for your time and consideration Mick top job

@Mobileblaster

Жыл бұрын

😊👌👍

Awesome video thanks for your time and consideration Mick top job 🇬🇧🇬🇧

@Mobileblaster

Жыл бұрын

As always much appreciated 😎👌👍

I'm surprised this mick doesn't use music, but it's good that I prefer it like this. the sound of the sand spray is good for relaxing 🤣🤣

@Mobileblaster

Жыл бұрын

😎👌👍

Good morning! Make a video talking about your machines, how much abrasive it handles or something like that and also the items it has such as an abrasive regulator or other items. I'm Brazilian and I really like watching your videos. Happy birthday

@Mobileblaster

Жыл бұрын

Hi my blast pot is a generic pressure pot sizes I use a few different pots all basically the same just some are larger than others from 2 x 25kg hopper to 8x 25kg hopper all very in blast time etc that all depends on the surface and how fast its coming off no blanket time for a similar job too many verbals to say this job should take this long if you get me?

The wheels look phenomenal

@Mobileblaster

Жыл бұрын

And most people over look the wheels when blasting they don't normally ask for them doing. I always try to talk them into it 👍

Hi Mick, would love to have seen a couple of close ups of you blasting those really nasty spots you showed in the initial walk around. They looked very interesting.

@Mobileblaster

5 ай бұрын

Noted I appreciate constructive feedback I will do this on my newer videos 😏👍

Brilliant work mick...alot better without the music.

@Mobileblaster

Жыл бұрын

Thanks for the feedback 👌

I like the tow cam

@Mobileblaster

Жыл бұрын

😎 I'm going to do more creative angles makes editing that bit more fun 😬👌

I appreciate your efforts. You haven't used additional music. Please keep not using music. 😊

@Mobileblaster

Жыл бұрын

I will definitely look into not using as much music I will be honest I had the Mac on mute and I was listening to the radio when editing and forgot to add music until it was too late 😂

@umeyba

Жыл бұрын

@@Mobileblaster what a nice neglecting 😂

@Mobileblaster

Жыл бұрын

@@umeyba 😂👍

Good to see you still going Micky. You haven't popped up in my feed for a while.

@Mobileblaster

Жыл бұрын

😎 thanks mate. Yeah I've not really felt upto doing much of anything of late just feel a little burnt out. I've booked some time off and hopefully be back to full motivation in a few weeks time 👍

Hey Mick! Good to see you!!!

@Mobileblaster

Жыл бұрын

😎👍 Eyup doug how's things?

And that's another great job done Mick. I've started to build a DIY pot blaster from an old gas bottle, it'll be only for personal hobby use but I'm looking forward to using it.

@Mobileblaster

Жыл бұрын

Oh cool have ya made a way how to meter the media flow? I see this is overlooked alot on DIY pots. Please make sure ya use a good mask or a full face is ideal don't use the hood type off ebay they are shocking

Saw an already started terrestrial tv program on extreme cleaners while channel hopping.Chap was explaining about rolled steel conditions on a blasted canal boat, I recognise that voice/accent !! and watched remainder not sure if you could have done better job stone kitchen floor maybe too much dust.

@Mobileblaster

Жыл бұрын

😎 I'm the only 1 that had subtitles 😂

I feel like could probably stand back a little bit more to give you a wider coverage and open your valve up just a little bit more. Good on ya mate.

@Mobileblaster

Жыл бұрын

My xl nosel would give extra reach but it felt a little under powered I was using that at the start so when I checked its about had it now so I put on a general clean nosel hot spot isn't the best with these so I had to make do

@scottkenzig5144

Жыл бұрын

@@Mobileblaster you do well mate. Sandblasting can be very frustrating at times. Cheers mate. Starting to warm up here in Australia 🌏

@Mobileblaster

Жыл бұрын

@@scottkenzig5144 warm up? is your summer starting? It's just starting to be a little nippy on a morning hear only be a few weeks before winter kicks in 😬

@scottkenzig5144

Жыл бұрын

@@Mobileblaster getting near the end of spring. Had a wet winter so it will be a hot humid summer. Cheers Mike. I'll keep checking out your videos.

Nice work as always sir! I’m looking into this business in the US. Do you have a video running down your equipment? At first I was thinking Truck+Trailer+BlastEqupment+compressor. Since finding your channel I’m liking your Van setup a lot. Have you ever had a different setup? Thanks from a newbie over the pond! Cheers!

@Mobileblaster

Жыл бұрын

Yeah loads of different ways to pull the job off I like the motility of a small ish van instead of a wagon but I will be honest I'm pushing its limits on a daily basis so possibly not the best option available. I don't have a video of my rig etc as I don't want to be a how to channel as alot of stuff can go wrong so I stay away from this side of things 👌

@jdub9k

Жыл бұрын

@@Mobileblaster Thanks man, keep crackin

What media gradient do you prefer for very rusty metal with deep pitted black rust blisters?

@Mobileblaster

Жыл бұрын

Depends on how heavy the scale is. My line of work fine and fine+ crushed glass works well. If I was working on something slightly thicker scale ie steel portal buildings I would look into a heavier grade of media not more course as some would think.

Did you increase the media flow or change nozzle size to speed up work rate from the roll over sheet arm to the back? Fine glass media? Nice job BTW.

@Mobileblaster

Жыл бұрын

I started out with the XL nosel but I could feel and see the pattern just off I checked and sure enough I need a new 1 so I would be down on psi with a slightly worn nose I knew I would be pushed for time with the wheels and underside so I opted for optimal psi and use a general nose to get 100 psi. at the start I was using super fine glass on the head board the sides was medium glass. I do play with the video speed to fit as much into the video as possible so some areas may look faster than others but mainly its just editing speed to make the video flow nice :)

How come you don’t run the compressor on red?

@Mobileblaster

Жыл бұрын

Illegal as of 1st April 2022 for any business to use Red diesel only exceptions is farmers golf courses and private none business use to produce power zero perpultion for private or business only a very few small niche of folk can still use it. Wondered why buildings and food has gone up? Every industry has been affected and zero media coverage. Yes I can still buy it not a problem its when I come to do my books I cannot use the red against the books so they don't even have to dip ya tank. Seen the latest? Clean air zone only affects small business anything that's new or nearly new is free anything business use older than euro 6 10£ a day fine for each city I visit including compressor for me to work in a city its an extra 70£ per day but if I was a bigger business and could afford new van and new compressor it's free totally a tax on the poor or small businesses and they wonder why so many people are unemployed

What size compressor you running?

@Mobileblaster

Жыл бұрын

260cfm 👌

Nice job - what’s the price for this? Thx

@Mobileblaster

7 ай бұрын

For Business Enquiries Please Email Info@MobileBlasting.co.uk Regards Mick

Just curious what sandblaster/abrasive you use? Also is that a doosan air compressor?

@Mobileblaster

Жыл бұрын

Yeah a doosan 7 71 and crushed glass was used on this job not sure if it was a fine or a medium grade 👍

Mickey, have you thought to run a fuel treatment through the air machine motor to burn the carbon and soot off the valves and intakes? You think that would smooth her out and give her better starts and zip?

@Mobileblaster

Жыл бұрын

I think It's electrical mate I think she needs a ecu or a Web of wires because the fault codes are too random to make any sense

@solskengroupllp2758

Жыл бұрын

@@Mobileblaster If I win the Kellogg's Cornflakes Billion Dollar sweepstakes, I'll get you a new one and fly the family to the Caribbean for holiday. In my case, it's having a shop that's far too small for what I do.

@Mobileblaster

Жыл бұрын

@@solskengroupllp2758 Go big or go home if you have the work to fill it do it take the leap whats the worst that could happen 😉

Do you use any type of wooden boards or blocks between the dump body and ground or chassis as a safety precaution just in case the hydraulics fail and the dump body falls

@Mobileblaster

5 ай бұрын

Yeah I'm unsure if I filmed it normally chuck a 6x6 wood beam between the chassis and tub. I may not do this sometimes but I'm conscious not to get any part of me between tub and chassis 👍

Great vid. How long did this take?

@Mobileblaster

Жыл бұрын

Thanks I cannot remember for sure but normally around 10 hour with the underside 👍

@roberthamblett9619

Жыл бұрын

@@Mobileblaster I just checked out some of your past vids...no trouble with the accent, fellow northerner. Did you ever sort out the design patent on your gear? I have just set up a flame spray firm in the middle of the Indian ocean and have got a load of blasting to do and not a lot of experience. What I have experience in is prototypes and was wondering if some advice trading could be in order ( after a suitable NDA is signed of course)

@Mobileblaster

Жыл бұрын

@@roberthamblett9619 I need to change a few things but it takes way too long and too much effort for a guy like me to understand what exactly they want and the costs are starting to make it an expensive venture so I think I will pick this up at a later date I've been in talks with a manufacturer to try and make it happen a different way but even this isn't my favourite option I'm at a loose end with it at the moment. I cannot really offer much knowledge only try to answer your questions as skill is earned with time in the lid every trades person makes their bit look easy just remember these videos make blasting look easy well it is to the ones that know how 😂👍

Did you just put a whole radio in your helmet Mick 😲

@Mobileblaster

Жыл бұрын

😂 JBL flip 4 I don't rate the battery though. I do have a power bank in my pocket (normally used for the 2nd camera hence no pov shots in this video) with a wire up to it later in the day 👍

@Moh4n95

Жыл бұрын

@@Mobileblaster You are funny mate .I sometimes see the funniest things happen in your videos. I do some something more compact but it hilarious you using the JBL flip 4 😂 incomparing i do use sony wi-sp510 earphones playing music from my phone end the craziest part is they are small they do not hurting your ears they are comfortuble while wearing your hoody and that helmet plus the earphones battery died's after 15hours of use. a highly recommended earphones to sandblasting with you can evens answering phone calls with it 😂while blasting

@Mobileblaster

Жыл бұрын

@@Moh4n95 the only reason I pick the speaker over the earphones is so that I can still use my ear defence and still protect my ears. I did use some Sony noise cancelling ear buds but the battery weren't good and they hurt my ears.

Hallo. Wie viel Material verbraucht? Sand? Luftmänge 7m3/min? Düsen ? :) Danke voraus. Mit freundlichen Grüßen Zoltán

@Mobileblaster

Жыл бұрын

I cannot remember but I would say 200/350kgs and this was done with 260cfm at 125psi

@Mobileblaster

Жыл бұрын

With a 650 nosel

vere you are

@Mobileblaster

Жыл бұрын

😉👍

out of interest can you not use red in compressor any more?

@Mobileblaster

Жыл бұрын

No it's been banned since 1st April 2021 for business use