Samurai War Club! Making a Kanabō for Metatron: Kodama Woodworks Episode 5
Thanks for watching ☺ I recently had the privilege to make a kanabō for one of my favorite youtubers, the Metatron. I tried to get it as historically accurate as possible, but there was an unfortunate lack of information about these. So, I hope it came out acceptably close. Please feel free to comment any questions you may have. Also, please feel free to visit my Facebook page "Kodama Woodworks" / eliotchildressniftyman
You can find the Metatron’s channel here: / @metatronyt
U-Drive Screws www.mcmaster.com/#rivets/=19z...
Also, in case you’re curious about the weapons dynamics charts near the end, these videos explain it very well: • Medieval Review - Docu...
Music
Heavy Interlude by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Folk Round by Kevin MacLeod is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/...)
Source: incompetech.com/music/royalty-...
Artist: incompetech.com/
Пікірлер: 174
the secret is to find a whole tree not lumber... that is slow grown with little water; this makes the densest wood and these trees are selected by weapon makers.
@albertosalgueiro9883
4 жыл бұрын
In Portugal there is holm oak or quercus ilex, using blanks
@weareallbeingwatched4602
2 жыл бұрын
As the African drum makers say "a nice dry one"
@weareallbeingwatched4602
2 жыл бұрын
@N the retro mohs hardness scale - "biting the gold".
Man, I would love to own one of those weapons. Looks beautifully crafted as well. Great job I have to say.
My tribe (Makah) tribe has a War Club Design and it's made form the jaw bone of a whale. I'm working on a Documentary on Native American weapons and warfare. I have an introductory video on my page that shows the design.
@charliebowen5071
4 жыл бұрын
But surely not all your tribes clubs utilised whale bone?? How many whales would they cull per year.?
@connorgarland113
4 жыл бұрын
Dude, that's an awesome lineage! So hyped for that video! I've never heard of any people's using whale bond for a weapon!! Any chance you could link the video when it's done?
@SeppukuAddict
4 жыл бұрын
Charlie Bowen you gotta remember that back in the day these tribes probably didn’t exist in large numbers, and that out of those tribesmen not all of them were warriors, and of those warriors only some would have used those clubs.
@stefanh5699
4 жыл бұрын
@@charliebowen5071 enough
@18754KRS
3 жыл бұрын
whaling is fun
Amazingly well done, both the end product, and the quality of the video production.
I love woodworking. I love weapons. Can’t wait to get back from Korea and try this out. Thanks a lot for the video
Did the Metatron ever thank you for this piece of beautiful craftsmanship? I don't recall seeing him post a video about it even though I'm sure he said he wanted a Kanabo.
@EliotChildress
4 жыл бұрын
He made a short patreon video about it saying he would make a dedicated video but I have yet to see that. Last I heard him mention it was a passing comment that he owned a kanabo but that it was a bit unwieldy, which doesn't surprise me but also makes me worried he's using it like a baseball bat rather than a weapon. It felt ok to me when swung while slipping the hands, but if held with your hands static it was a bit heavy.
@kirkcavenaugh758
Жыл бұрын
@@EliotChildressit looks wieldy to me
@a_fuckin_spacemarine7514
11 ай бұрын
@@EliotChildressdid he at least pay you for it?!
@TheShurikenZone
6 ай бұрын
@EliotChildress Metatron tends to do his research, certainly, but this is also a pretty obscure topic, as there are no Ryuha that I'm aware of, which contain formal techniques for the kanabo. From what I do know of its (speculated) use, the strikes were mainly downward, using gravity for propulsion and the ground to arrest the enertia... not unlike what you do with a sledgehammer. It was also commonly used very much like a battering ram, apparently. And there is a Kukishin Ryu bojutsu technique, which is almost certainly derivative of a kanabo technique, where the shoulder is used as a fulcrum. Anyway, I hope this message finds you well, and is not overly redundant. On youtube, I focus on shurikenjutsu, but I am versed in bugei as a whole, and figured you might not mind me chiming in. 👍👍
A joy to watch, craftsmanship at its finest.
@EliotChildress
4 жыл бұрын
Julian Carmichael thank you :)
Nicely done sir! Remember, with handle or grips, you should be able to fold your fingers around the handle, for a secure grip. This is how they made them, so you did not lose your grip on the weapon. Very nice!
Looks great! Can’t wait to try this myself.
Looks awesome! The craftsmanship is fantastic!
A weapon fit for Yamato himself!
Thanks for the tip on the nail screws from McMaster 👍🏻
Beautiful piece. Don't worry all that much about accuracy- Kanabo and Tetsubo measure anywhere from foot long little clubs to seven foot polearms.
@HappyTheFan
Жыл бұрын
Cool,
Dude this is so awesome!
❤ awesome job!
excellent Work, I love the carving.
should have done 108 studs for that buddha cred
Holy cow I want one of these!
The historical examples wiki shows were crude pipes with spikes drawn out. That makes more sense as a weapon. Friction fitting them on and having the spikes attached to steel eliminates a whole lot of weak points. The diy examples on KZread most have the studs ripped out as soon as it hits something.
Great videos bro
Amazing
Thank-you.
Damn this video goes crazy
Masterpiece, excelente. Saludos desde la lejana Argentina
Great job dude!
the metatronions are with you
@theanciantswordsman7606
5 жыл бұрын
Yes we are !!!
I looked up pictures of the kanabo on pininterest. It shown variety in the design. Some were obviously made to be more agile like a baseball bat while others were super thick and bulky. From what I noticed is the studs' spacing with each other and clustering were more dense. There were some kanabos with an added feature where a metal sheet was placed on each side of the blunt face. It was hammered and nailed in by the studs. This gave it more protection and durability to the wood. Not all of them had this. (I think metal was very expensive back then. This would explain why not all of the versions we see have the metal sheet or were flat out made out of metal entirely.) Some versions had the studs to be poking out more predominately. Some were either blunt sharp studs like you see on a morning star mace or were rounded. Both seem to indicate they nails were very pronounced and protruding outward from the weapon as a common feature. I think the shape of this weapon is fine. I think the studs should be more numerous or perhaps more dense in spacing. The studs might need to be more poking out. I can understand why this was not done for your weapon. I don't think they make a lot of stuff that can be sued for a historically accurate kanabo. This would cause it to be more difficult to find stuff to make one or maybe doing some homemade style metal shaping to produce the studs or blunt spikes. Considering I think the original samurai and soldiers had go through similar situations where they make do with what they got around, afford, or what the best of their abilities can create this is accurate in my opinion. I can see a person out there in the past making studs like this and giving them a grouping like this. I would give it a pass.
@skinnytothefeet3531
5 жыл бұрын
Pininterest
Super cool. Also the only one ive seen built so far that i would find worthy to call battle ready instead of decorative like most modern weapon replicas.
@EliotChildress
2 жыл бұрын
Thanks! I spent days researching dimensions but they are few and far between. But I did my best while working from what I could find. I may have gone a bit far in terms of strength but it’s definitely not too weak lol.
I like that !
I totally want one! What’s it gonna cost me to get just the turned blank? No carving .no u screws. Not even the bumps on the handle. Just the octagon and a round handle?
man i would love for you to make another one. a taller one with strips of metal and the studs. would also love to see you make a gunstock war club. i recently made myself one and i think you would love it.
@EliotChildress
3 жыл бұрын
A custom made flintlock with engraved everything was on my list before I moved to japan... sadly now it’s just a project I’ll never get to do...
Where did you get your beech wood from? Was the square stock made by gluing 2 pieces together? What was the measurements of the square stock before cutting? What measurements did you use to cut the piece down to an equilateral octagon?
@EliotChildress
5 жыл бұрын
Sorry for the late reply, I've been away from the channel for a bit. But I got my wood from Hughes Hardwood in Rancho Cordova, CA. And yes it was made by gluing two pieces together but I made sure to orient the grain so that eventual warping would press the edges of the joint together. And to be honest I don't remember any of the measurements. I cut off a test piece and kept adjusting my fence until I got it right. Hope that helps.
Whoah, The Metatron is a lucky guy. Envious of your shop bro, no I've build 👍
Otimo video, ficou realmente muito linda
@EliotChildress
6 жыл бұрын
obrigado :)
Beeing 4 years late, I got two thoughts: a) I'd prefer to get a handle with more grip to it. You may wanna lose a lot of force, if the club is rotating in your hands at the moment of impact. b) There are nails for historical shoe making. They are basically tiny iron pyramids with a pin at the base to nail them into the sole. Roman soldiers shoes had them. Ask the Metatron! But, just two minor thoughts. I'm totally in love with your club right now!
I watched this a few weeks ago and decided to make a kanabo of my own. However, because I'm equal parts a miser and a masochist, I've been doing it with nothing but a rasp. Thanks for the inspiration!
@EliotChildress
5 жыл бұрын
I'd love to see the final result. Have fun and I wish you luck with the tedium :)
@Urdarbrunn
5 жыл бұрын
Thanks! I started on the 20th and I've put somewhere around 30 hours into it so far, but I believe I'm almost done. If you're serious about seeing the final result, how shall I go about that?
@EliotChildress
5 жыл бұрын
@@Urdarbrunn I have no idea haha. I'm still not very good at this whole youtube thing. But if you post it to instagram or something similar I can check it out through a link. I think it'd be kind of fun to create galleries of peoples' works to inspire even more people.
@Urdarbrunn
5 жыл бұрын
@@EliotChildress Sounds like a great idea, I can probably dump it into imgur and post it when it's done. Until then, take care.
@villaindepot
3 жыл бұрын
@@Urdarbrunn Did you ever finish it? If yes, can we see?
What diameter are the U drive screw heads on this project?
Would there be any benefit to inserting threaded tubing so that you could use different styles of bolt heads? Or would the tubing be weaker than plain wood?
@EliotChildress
4 жыл бұрын
I considered it, and I don't think there would be strength difference in regards to the wood itself. My concern was the need to retighten the spikes all the time like I remember having to for my track/field cleats.
2 questions: How does hickory fare in making a weapon like this? Also have you ever made anything from American burr oak which grows in the Midwest and Plains states? Woodworking is such an underrated profession.
@EliotChildress
2 жыл бұрын
Hickory is one of the best for things like this. It’s very good at handling impact which is why they use it for ax handles a lot of the time.
Sup homie. You badass kickass Japanese war club maker you.
What's the measurements on the screws that you used?
I found a pecan stick and it looks like a club and it made me think what can i make and then your video was in my recommended and i was like it's fate and I'm 50% done and i love playing with it
@EliotChildress
2 жыл бұрын
Glad to hear it! Hope you enjoy every minute of the process.
@jakeivy7231
2 жыл бұрын
@@EliotChildress oh i am it's small too maybe a foot but I'm loving this project
A lot of work there
very cool just subbed. what did you finish it with? an oil or a lacquer?
@EliotChildress
5 жыл бұрын
Thank you :) As for the finish it was General Finishes Seal A Cell and then Arm R Seal. Most historical Kanabous were lacquered so I didn't feel weird about using that. But my personal preference for wooden weapons is oil. I just like the way it feels and is what I use on my Bokken and Jo.
Artillery nails. We use those to mount type plates to machines
@EliotChildress
3 жыл бұрын
knutzzl Rampspoetnikov well that’s a much cooler sounding name than what I found. I’m gonna start calling them that.
So if I wanted to increase the weight of something like this could I put a metal core in the center of it? Or would that cause some issues with durability?
@EliotChildress
2 жыл бұрын
I don’t really think it needs the extra weight, it packs quite the punch as is, but…. If you feel like it, I would cut a groove down the center of both pieces before gluing into a square and epoxy some all thread in there. Then just for extra protection and added weight add a metal hoop at the top to keep that part from splitting. But i’d be sure to make the rod extend into the handle part too or else it might crack in half at the end of the handle.
I would make one of those but with Obsidian blades like an Aztec Macuahuitl
What size where the screws you used?
Dude I had no idea my grandma was a ninja! I mean, she had like four of those things on her bed holding up curtains! Joking joking only joking! Great job and I enjoyed the bit of Japanese history.
Where did you get the beechwood?
There are so many varieties of Kanabos, like both wood and metal that you mentioned, they can be tapered or not, sharp or blunt. The way you want it to be is pretty much your (and weapon makers') call. However I am sure it's illegal to own a Kanabo with sharp mace points nowadays, so either stubbed Kanabo or just flat is the only thing that can be owned legally in most states.
Beautif ul weapon.👍👍👍
How did you get the beech wood? I’m trying to make one of my own yet cannot find a size comparable to yours.
@EliotChildress
28 күн бұрын
It’s two boards glued together.
I know I'm super late to the game but where did you get your lumber from? I'm desperate to find it out in my area.
@EliotChildress
3 жыл бұрын
Alexander Evans I’m from the Sacramento area and got it at Hughes hardwood. It was almost an hour drive but worth it to find the right stuff. I’d recommend a deep dive google search or ask at your local hardware store where to go for nice stuff. Somebody might know something or at least point you in the right direction. There’s also online ordering if it comes to that but I’ve never tried it. Slightly tempted to do online now though since my move to hyper rural japan. Hardwood lumber is pretty rare out here.
How much do you charge for these. I would like to buy one.
I want One!
I was kind of skeptical from the thumbnail. After watching I have to congratulate you on your job. I know you did your research. Is there a reason you didn't make a tapered one other than it being easier not to? Great job no criticism intended!
Would u ever make one and sell it?????? And maybe a heavier one
what's the name of these screws?
How did you make the hex shape on the damage part of the weapon?
@EliotChildress
Жыл бұрын
It was actually an octagon so pretty easy. Just cut some 45 degree bevels on the table saw. I think the process would be similar for a hexagon though. Just at different angles. Cut one, rotate, cut the next
@diogenesstudent5585
Жыл бұрын
@@EliotChildress ty
Do you have any of the Kanabo’s for sale ?
What modifications did you do to that lathe?
@EliotChildress
4 жыл бұрын
Pack AR223 I had to make a plywood extension for the table that I clamped on to the main bit. (Didn’t want to drill and tap the metal) It actually worked really well and was surprisingly stable. And the circular holding bit with wheels to keep the piece from flexing while I cut it. But the second thing is pretty typical and idk if I’d call it a modification as much as just an accessory.
Plannng on making a quauhololli( mexica club) but with a hibrid of kanabo woth cilindrical buddy and a ball head at the end and thanks for this video
it looks great, now you got smash some poor sap's head to see if it works
What were the dimensions of the wood you used & the size of the nail-screws?
@EliotChildress
Жыл бұрын
Oh man, you made me dig through some old emails for that info haha. But they were 18-8 stainless steel, size 12. 1/2 inch long. I think item number 91654A291. But honestly I’d just recommend going with whatever size your gut tells you. As for the wood I don’t have any record of that but maybe 2.5x2.5 inches or 3x3 inches.
Tell me please what are you hammering in 8:38? How it's calling?
@EliotChildress
3 жыл бұрын
They are called U drive screws. They are basically hammer-in screws. They are linked in the description. I wish they were a bit more spike shaped rather than domed on the top, but I couldn’t find anything like that. Oh well.
Looks like Osage which is interlocked and very strong.
May i asked What Size u screws you used? Please?
@EliotChildress
6 жыл бұрын
I used the 18-8 Stainless Steel ones. Size 12, 1/2" long. They were $9.85 for a pack of 100. Product number: 91654A291
@jamesback8024
6 жыл бұрын
THANK YOU
Could you do a tupi-borduna? It's a weapon of the brazillian natives
It's a Paul Bunyan sized baseball bat. Gives new meaning to the words "grand slam" however, I'd like to have one, you know for the Zombie apocalypse and all that.
how big was this Kanabo, id love to make my own as im also a wood turner and im also a martial artist so this would be an amazing project to work on
@EliotChildress
Жыл бұрын
I think it was like five feet. I don’t really remember… I just looked at old pictures and woodblock prints to get an estimate. I’ve only seen one in real life but it was in a shrine so pictures weren’t allowed. From what I remember it was about that long. Hope you enjoy the project. Good luck 👍
@emberbreak2172
Жыл бұрын
@@EliotChildress thank you so much I hope you have a great new year
Aki oni I like that
*ah yeah shugoki time*
What size u-drive screws did you use?
@EliotChildress
5 жыл бұрын
Oh man, you made me dig through some emails haha. But they were 18-8 stainless steel, size 12. 1/2 inch long. I think item number 91654A291. But honestly I’d just recommend going with whatever size your gut tells you.
@anythingoriginalleft
5 жыл бұрын
Thank you for your reply. (I was trawling the net yesterday for these in the UK and I finally found some in size 12.)
Mine is twice as heavy! I FUCKIN LOVE IT!!!!! 🤣🤣🤣🤣🤣
How big is the piece of beech you used at the start?
@EliotChildress
3 жыл бұрын
It was about 4’6” and I think like 2.5”-3” square in cross section. It was made of two pieces glued together with the arcs of the end grain facing away from each other to keep it more stable.
@beardednortherner64
3 жыл бұрын
@@EliotChildress Cheers lad. Also, how long did you make the rounded handle before you did the carving? Is it half and half?
@EliotChildress
3 жыл бұрын
@@beardednortherner64 I can’t remember exactly but looking at the weapons dynamics chart I made it looks to be between 60/40 and 50/50. But not 50/50 exactly. If you want the real measurements you’d have to ask the metatron since he has it now.
How long did this take you to make?
@EliotChildress
2 жыл бұрын
Excluding the decorations, about half a day. Including, maybe a week including designing the carving.
Can you make me want but smaller size appreciate it thank you
Hey what size screws did you use ?
@EliotChildress
4 жыл бұрын
I used the 18-8 Stainless Steel ones. Size 12, 1/2" long. They were $9.85 for a pack of 100. Product number: 91654A291
@kaimanabush4067
4 жыл бұрын
Thanks so much
Incredible wood working skills! We need to resurrect vocational training in the United States rather than pushing now unaffordable colleges and universities that do not prepare students for the harsh realities of life post-graduation including being in debt for $100K plus.
This may sound uneducated but I have no clue about woodworking, is that a wood lathe you got?
@EliotChildress
5 жыл бұрын
Thanks for asking. I’m always happy to answer any and all questions. Yep it’s a lathe. I had to make an extension for it and also add a stabilizer in the middle to work on this piece though. Otherwise the wood would flex from the pressure of the tools.
I want to buy one from you because no one sells them or makes them and I’ve done training with them for a while but I want to get my own 😅
@charliebowen5071
3 жыл бұрын
You have not trained with a kanabo!
金棒いいですなぁ!金棒とは日本の妖怪の鬼が持っている武器ですな 「鬼に金棒」という言葉があるぐらいです ほしいw
Has it been tested?
@EliotChildress
2 жыл бұрын
I swung it around a lot and it worked really well if you let your hands slide up and down the handle rather than thinking of it as a club with a fixed grip. But as for hitting, the best I can do is say I firmly believe it’d take you out on one swing but since I was sending it off I couldn’t actually hit stuff. You’d have to ask the metatron how it is when you hit stuff.
My heart sank for him when he said he had to let it go and send it away. Definitely the mark of someone working with love for an art c:
@EliotChildress
4 жыл бұрын
slevin1157 if I could keep everything I make I 100% would. It’s hard to let go of some things, but these videos are how I keep them around.
Not understand why they would put metal Stubbs in making the hole for it would weeken it and they wouldn't cause any damage to someone when you hit them either??
@EliotChildress
Жыл бұрын
Thanks for the question. I must admit my studs are not 100% accurate because they SHOULD be sharper. Unfortunately I couldn’t find any without paying a blacksmith to custom make them. But even as is, they do have a job. The main reason is for anti armor. The studs allow the force to be concentrated on a smaller and harder area so that it has more chance of imparting that force into the hard armor. It’s the same idea as a spiked mace head medieval knights would use. Simple wood would have a greater chance of deforming around the armor, damaging itself in the process. The holes do technically weaken the wood but it’s still plenty strong and some of the antique ones used metal banding to add more strength and keep the wood from splitting.
Oni demon club
Do you sell these?
@EliotChildress
2 жыл бұрын
If I could I would. But I moved to japan and had to start over from scratch. Maybe in a couple years when I save up enough for a lathe.
@nicholassapsin5142
2 жыл бұрын
@@EliotChildress I understand thanks! Good luck over there.
visually it looks awesome, tho if used, it would split like nothing. id add several metal rings, specialy top and botom, and i would leave handle rough for beter grip.
@EliotChildress
6 жыл бұрын
I completely agree that rings would be a great addition that I probably should've added. Honestly, I heavily considered adding some but some weird combination of doubting my ability to do it well and a desire to keep the weight down convinced me not to. However, I have complete faith in the wood staying together as is. It's a massive piece with carefully chosen grain, so I'm not worried. If anything I'd say it'd would likely split the way baseball bats do, which adding rings wouldn't remedy.
White Oak would work.
me need club
Mortem Kanabo IRL be like:
we, in industry call them "riv-nuts"
I just want to say how absolutely terifying these things look and how i could see it 100% being able to chop down an armored samurai
For Honor Shogoki's weapon
@themaestrobill889
5 жыл бұрын
GoogleTristinTheFox N Gamer agust iuriai :D?
1000 1000
Would be interesting to design a walking stick with that general style.
Nada
Fucking incredible! Go crush some bones.
Lucille is jealous.