i don't know if i can trust you dude. looks to me like you suffered a severe electric shock prior to recording this vid!! Only joking. Very helpful advise, thanks

@profixerr can you provide a link to purchase the replacement micro USB please, to ensure I/we purchase the correct one. I see JNTC J7116 on the original but it isn't a part number I can find.

the technique to remove the motherboard isto put a pick underneath the part of the board with the sd card attached then using another pick pry up fron the side behind the sd card to remove the board from the clips holding it . there are also clips on the side by the battery connecter that will probably require prying too.

Great Video best one i seen make my job easy peasy now 💯

@ProFixerr Where can we find/buy the Micro USB connector for replacement?

Can the charge port be converted to usb type c

Liked-Subscribed-Notified. What is the part number for the USB-C replacement port? Where to purchase?

@Privatedata1234

2 жыл бұрын

I need it too please

Is it possible to replace/upgrade to a usbc port?

I hope to see a video replacing power key of T585

Hi what is the temperature for the for hot air gun and soldering machine

If I don't want to solder a new connector, is that entire subassembly with the connector on it available?

Did you touch a battery and get a high voltage shock?

Thanks great job well done

@profixerr6275

3 жыл бұрын

Thanks for watching!

Great video, thanks for sharing this

@profixerr6275

4 жыл бұрын

Thank you🙂

Temperature of solder iron, and hot air? Please advise

Thanks you for this info

When I plug my USB power meter in its reading 5.04V and only 0.66A ? Yours is reading 4.99V and 1.51A? Any idea why this is? also it wont turn on.

Hi would I be able to solder a c-type charing port to the tab A. Has it ever been successfully done? Or is there something that would prevent it from working properly?

Great job. 😊

Great video, wish I would have seen this before I bought the part. Not sure if I can solder it myself, maybe my Honeywell soldering friend can help me

What is this gel what you smeared in the beginning.

@aquaroyale

Жыл бұрын

Flux

Great video!

What temperature of HotAir are you using in this case ?

What kind of solder is that? Looks clear? Is it conductive or not? Thanx!

@whitedwarf5247

3 жыл бұрын

I think you're confusing his solder with flex he was using.

What is the tools you used ?

Can you add wireless charging pad into Tab A 10.1 T515 ? This model does not support wireless charging. i know there is adapter out there require plug into USB-C. But i am looking into more thin wireless adapter that can solder to the board. Reason behind all this hassle is, i will have to install tablet in my car, and this requires power and data. Believe i almost tried all solutions, for power+Data simultaneously. i used OTG with power, lava adapter , root the tablet to modify files...etc. my final solution would be to install utilize onboard USB port for data and wireless charger for power. i appreciate your help.

My tablwt flickers when plugged in and won't turn on

@profixerr6275

4 жыл бұрын

If the tablet flickers, it might have a screen issue. What is the history/story behind your tablet not working?

@sharonwhittington2859

4 жыл бұрын

@@profixerr6275 it was working fine then i went to turn it on and it went black so i plugged it in and the charging signal came on then it started to flicker

@pooptubesex

4 жыл бұрын

The battery cant charge all the way because the tablet isn't receiving enough power.

@t19s

3 жыл бұрын

Same Problem :(

@DaveCarvey

3 жыл бұрын

@@sharonwhittington2859 I noticed mine does the same thing if plugged into a power source that doesn't provide enough power to the tablet to charge it.

solder has an L in it.

@profixerr6275

3 жыл бұрын

Yes, my lord

This guy make like the motherboard will just pop out. It is generally quite well held in. I'd find another video and another company to deal with.

Motorrad ohne Helm gefahren?)))

👏🏻

What kind of heat gun are you using?

god bro

How is it you can solder but are incapable of pronouncing the word solder correctly?

@profixerr6275

4 жыл бұрын

Guy Singleton that’s how it’s pronounced in the USA. Outside the USA it’s common to say sole-der I believe

@Brian911uk.

3 жыл бұрын

@@profixerr6275 and definitely NOT soder in Scotland :-)

@colinwillcocks6004

2 жыл бұрын

@@Brian911uk. Lol, definitely means something different.

@x1ic1x

Жыл бұрын

@@colinwillcocks6004 like what

@ambreenfarooq4067

7 күн бұрын

There's a thing called an ACCENT. Where people are born, influences the way they speak and pronounce certain words; making fun of that doesn't exactly make you look good.

I've had three of these ports fail in three Samsung tablets and one in my phone. Samsung = JUNK NEVER AGAIN Samsung.

Sodder!! its pronounced SOLDER soul der

هاهدر بالعربية 😒😪🤭

@jameswallingford

3 жыл бұрын

من الهدر باين انت مغربي

Too fast too little explanation sorry…

with other words: impossible to do this yourself unless you are a professional, do not to try his at home