🛒Buy Direct and Save!: bit.ly/2XLtQPm Buy on Amazon 🛒amzn.to/3JWNygv Samsung S23 Ultra 🛒Buy Direct and Save: howl.me/ci2LcU1X68Z 🛒Buy on Amazon: amzn.to/3TTvB77 🛒Buy on BestBuy: bit.ly/42MpdCN Buy Silicone Grip Case 🛒 amzn.to/3zhHFFA Buy Leather Case Camel / Tan 🛒rb.gy/ngv3 More Cases at BestBuy! 🛒bit.ly/3G20X5C Massive Spigen Case Review S23 Ultra: kzread.info/dash/bejne/nHmt1MlsnKrFmLQ.html More Cases at BestBuy! 🛒geni.us/NZfn

@YosefElgart

Жыл бұрын

kzread.info/dash/bejne/mIJqxciEd5aroto.html UB pro works now with dome

@TheJabberTech

Жыл бұрын

negative! kzread.info/dash/bejne/d5yBmqiphqjblNI.html

If you keep getting dust on the screen before you put the protector run a hot shower in a bathroom and do it there 100% you get dust-free installed

The rubber square is new and a good idea. 👌 On previous WSD protectors I've always gently pressed down in the fingerprint scanner area after the first curing and then second cure with the uv light which helped. Having a level work surface is key so your not having to move the jig around because the glass protector is floating on a layer of silicone glue and can move around if the jig is disturbed. And then your not also having to touch the protector to tease the glue to the edges. The WSD seemed a little too brittle for the Samsung Galaxy s²² Ultra as mine kept picking up nicks along the edges_ and I do baby my phone. I've used x4 since the phone launch date. Hopefully the s²³ version is a better quality. Thank you for sharing your fitting experience. 👍 Appreciated.

I‘m glad I discovered your video - since the S24 series launched, I decided to give my S23 Ultra some love and got the Whitestone dome tempered glass, and I was worried about case compatibility, I’m glad you showed compatible cases, I got the Mous Limitless Aramid fiber, works perfectly, love it 👍🏼 Thank you.

Just installed mine following this. Thanks so much!! Seeing this in action made it much easier!!

@TheJabberTech

Жыл бұрын

Awesome! Glad to help

Thanks for this video, Jabber Tech. Hit lots of points viewers were looking for 👍

Thx!!! Great video, I screwed up my 1st two attempts with the Dome on an S23, the glue didn't quite make it to the top. The suggestion about tipping the phone to get it to move where you need it is exactly what I needed!! Appreciated!

Great review man! Well done!

Thank you so much for this great step by step installation for the 23 ultra. When I opened the box I immediately froze. It looks overwhelming at first. I watched your video 2x just to make sure. I was then able to complete my installation and it turned out PERFECT!!! Patience is your friend when installing this screen protector. I will always use this screen protector for any phone i have from now on. I LOVE IT!!!!

@TheJabberTech

Жыл бұрын

Great to hear!

Can you please confirm if this product can fit together with UAG Monarch? Thanks!

How is this for fingerprint smudges? The last protector I had on my Note 10+ wasn't very smooth and left lots of smudges during use. Also, are you seeing light refracting at the top of the protector where it isn't aligned with the top? Saw some reviews mention this on Amazon and that would really annoy me.

Hey man great video....I just ordered the minoldo? Tempered glass...doesn't have the glued process, but I hear white stone dome is best for falls....one question...how did the camera on the front not get glued on it?, glue just says where the glass is? and just doesn't even head out that way? If so very cool...I need a case that can take a good drop like from doing pullups at the gym current phone had popped out before ....wow, I would love to have this screen and your the third person I seen installed and I like it 👌.

Would it not be better when the weight is rather put on there before the spreads. Your opinion. Also what of the pen feel on the screen

There are several vids of installing Whitestone Dome glass but this is by far the best!! Keep it up. I appreciate quality content....

@TheJabberTech

Жыл бұрын

Appreciate it 👍😁

I've had this screen protector for both of my previous phones and it's amazing... However, once this screen cracks its a NIGHTMARE to take off. The adhesive liquid is so good that you have to crack and chip at the glass until it is removed which is a extremely messy process which involves wearing safety glass to prevent dust sized bits of glass from flying into your eyes. Like it said it lasts months to over a year until it cracks. I've never purchased another because I can't be bothered going through the removal process which takes 3x the amount of time of installation. This is just a heads up for you to consider purchasing this. Feel free to ask me any questions regarding the whitestone dome.

@MrRiz157

Жыл бұрын

Does it scratch the screen

@Ughmahedhurtz

Жыл бұрын

@@MrRiz157 Not in my experience. Not enough pressure and the glue acts as a bit of a pad under the broken protector.

@dannywairasi1287

Жыл бұрын

No your screen remains unscratched.

@superowner11

Жыл бұрын

does it crack of its own after a few months or a year? or will it go on for ever as long as you take good care of it and don't bump into things or drop it?

@chargv

9 ай бұрын

For the person wondering how to take the shattered screen protector without such a hassle, just put 1 or 2 pieces of transparent packing tape (i.e. Scotch tape, BOPP tape) over the screen protector and proceed with its removal. You can use duct tape instead for better adhesion to the glass bits, in case the Scotch tape you have available lacks adhesive tackiness.

Thanks for this detailed video install guide. This video definitely helped me that this protection is one of the best one.

@TheJabberTech

Жыл бұрын

Glad to help

Is it compatibld with spigen tough armor cSe?

Great video but u think the s22ultra white dome glass will also work on s23ultra since they have the same screen size

I just installed one on my new S23 Ultra, and got a perfect install. I always use Whitestone Dome glass protectors.

@_jiraffe_

Жыл бұрын

Any problems so far?

My experience corroborates his experience. My Unicorn Beetle Pro Case did EXACTLY what he said, except not over time, but damn near instantly. Love the case, love to protector; they're just not compatible.

Hi thanks a lot for your product review. Appreciate this

@TheJabberTech

Жыл бұрын

Glad it was helpful!

@stevehan3809

Жыл бұрын

@@TheJabberTech Thank a lot again. Steve Han from Whitestone.

Thank you for this video.

Kindly reply to me about your experience with the mid line and is it completely gone now?

Ordered white dome for the first time, you don’t make it look too complicated! Most of it is just setting it up.

@jonathanoxlade4252

2 ай бұрын

Setting a regular screen protector is more a pain this is basically gluing it to your phone which you could easily do with UV activated clear glue and a regular screen protector because you move it around and have no bubble and then just activate the UV glue

Hey! Nice wallpapers on your home and lock screen. What app do you use for the wallpapers if you dont mind sharing?

@TheJabberTech

Жыл бұрын

Got them from Pinterest

Great content. I used at least 20 different glass screen protectors on my note20 ultra. And every time with the supcase unicorn beetle pro, poetic spartan, and otterbox defender pro, the screen would always lift. No matter how much I curde it. So I finally got the AMFILM elastic skin screen protector, and never had a problem.

@TheJabberTech

Жыл бұрын

Appreciate it!

@trent4439

Жыл бұрын

The whitestone dome fits with otterbox symmetry case on s23 ultra

@jeromegold3216

Жыл бұрын

@@trent4439 but how does it fit the defender pro

@TheJabberTech

Жыл бұрын

kzread.info/dash/bejne/i2SNrKmPg7aqorg.html

@shinyobsessed1271

Жыл бұрын

No problems with Otterbox Commuter and Whitestone Dome on my S23 Ultra

I need to get the Spigen Tough Armor! Looks great. Do you recommend it?

@TheJabberTech

7 ай бұрын

Yessir

I hope it works with the Dbrand cases.

I like your wall papers :)

Best tutorial ever. Was able to install mine with no single issue at all. Question tho, would you really recommend the diamond case because it feels cheap to me. I'd rather get an Spigen I guess.

@TheJabberTech

Жыл бұрын

Appreciate it! Nah, I'd get Spigen. Diamond pattern is nice but their case game isn't there yet

@jrpajarillo2402

Жыл бұрын

@@TheJabberTech yeah looks generic. Just ordered the Spigen Tough Armor and Liquid. Ty for the tutorial bro.

@enedor9346

Жыл бұрын

​@@jrpajarillo2402 Hey man, was the tough armor and the WSD glass a good fit?

@jrpajarillo2402

Жыл бұрын

​@@enedor9346 perfect fit.

I'm always wondering why make such a big fuss about screen protectors and cases...! The S23U comes with Victus2 glass. Now, there's choosing a color we like, but then... we cover it's color with a case. Do you get my point here... BTW, loved your video (1st time view, and decided to subscribe), you're a sharp speaker, no pun intended, all the nitty gritty details are articulated with precision. Thanks, till your next video 😀

@TheJabberTech

Жыл бұрын

Appreciate it!

Have you tried Whitestone Dome on a supcase for S23 ultra. Having trouble finding a good glass screen for yhat case with kick stand. Thank you.

@TheJabberTech

Жыл бұрын

mentioned in the video and in Supcase Review kzread.info/dash/bejne/d5yBmqiphqjblNI.html

Great video!

@TheJabberTech

Жыл бұрын

Appreciate it!

The only reason i bought this protector is because i watched your video and seen it was compatible with the spigen tough armor case. I tried plenty of different screen protectors and none of them stayed on the screen due to lifting. So if you do got the Spigen tough armor case and want a screen protector that doesn't lift this is the way to go. Thanks for the video.

@TheJabberTech

11 ай бұрын

Glad it worked out for you

Thank youuuuuuuu We need you experience with the S-pen, Is it smooth like original glass ? How about clearness, color diminish whitish ? Is that liquid safe on screen? would left any smudges after it's removed? thnks again

I was wondering if you have any experience with this brand for the samsung fold phones? I've tried several brands but unfortunately all of them failed and started getting loose in the middle section right where the phone folds 😬 thusfar I haven't found one that actually stays put.

@TheJabberTech

7 ай бұрын

I didn’t jump on the fold yet

Hi great video tutorial however when you did the same for the S22 ultra you pressed about 6/7 times where the finger print sensor is in-between the 1st and 2nd UV cure would you do the same for this installation

@TheJabberTech

Жыл бұрын

No because they now include the rubber stamp pad which I showed in the video. But if you wanted to, I don't see how it would hurt

Thanks for the video! Would have been nice to see how the finger print reader works though!

@TheJabberTech

7 ай бұрын

Watch the intro and you'll see it 😉

Installed a dome glass on my S22U about a year ago and it's still in mint condition except for some dust built up on the edges.

What's the accurate finger print rate would you say? Last year when I got the s22 ultra and tried it was horrible. Switch to film screen protectors bc I couldn't deal with it lol

@TheJabberTech

Жыл бұрын

Much better than last year thanks to the rubber pad that they include now. I'd say over 95% success rate after you retrain the fingerprint

Will this work for a VRS Design Damda Glide Hybrid Wallet case?

@TheJabberTech

Жыл бұрын

kzread.info/dash/bejne/gKCW0ptvfJCzlag.html

Wasn't better if place that rubber pad during the fluid is covering the screen, was it? So, you'll be sure no liquid glue on the fingerprint reader area, right ?

@chelekumar3399

10 ай бұрын

No after glue

Thank you for sharing! Their own guide wasn't as clear as yours.

@TheJabberTech

7 ай бұрын

Glad to help!

Hi, compatible with otterbox defender case?

@TheJabberTech

11 ай бұрын

Don't remember. Check out my review here kzread.info/dash/bejne/i2SNrKmPg7aqorg.html

Does screen protector work good with the fingersprint scanner Jabber ? I had installed Zeelot tempered glass for my s22U before but it worked badly with the fingersprint so i have to install the official screen protector of samsung and it works 100% good. Dont know whether this Dome SP can work 100% good with fingersprints scanner, pls answer me. Thank you very much❤. Good video btw👍🏻🔥

@TheJabberTech

Жыл бұрын

Watch the first 30 seconds of the video 👍

@thienle3244

Жыл бұрын

@@TheJabberTech thank u so much

Where did you got your wallpapers? Thanks

@TheJabberTech

Жыл бұрын

Pinterest

@Tylenol888

Жыл бұрын

@@TheJabberTech ok thanks.

the spigen one doesn't need glue or that uv thing

Had one on my note 20 ultra good luck trying to get it off att didn’t like it to much when I traded my phone in.

your wallpaper is amazing from which app have u downloaded please can u provide the link.

@TheJabberTech

10 ай бұрын

Pinterest has awesome walls

Whitestone Dome is the way to go

Hi, what about finger print scanner? Is it working fine?

@TheJabberTech

Жыл бұрын

Watch the beginning of the video

Does AUG Plasma series case compatible with whitedome glass?

@TheJabberTech

Жыл бұрын

Yes

@michelleramirez5264

Жыл бұрын

Thanks

Bro pls tell me wallpaper app you kept....❤

@TheJabberTech

10 ай бұрын

Pinterest

Where did you get those wallpapers from!?

@TheJabberTech

Жыл бұрын

The internet 🛜

Mine went on without a hitch and the fingerprint reader works as if no protector is installed. Cured it a bit and then pressed the rubber for 10sec and cured it completely, there is no visible protector apart from the camera slot at the top. Best protector you can get

My first attempt at installing the Whitestone glass protector on my S23 Ultra was a disaster! For some reason, the glue didn't cure and the protector slid off my phone. There was glue everywhere. I was really upset! By the next day I had calmed down, and proceeded to create revised installation instructions, based on my previous experience. The second try went perfectly. Edit #1: At first, it seemed like the fingerprint sensor was working well, although I had to re-do my fingerprints. However, over time it became apparent that the fingerprint sensor was not working very well, which was disappointing. I will probably replace this screen protector with Whitestone Dome's PET protector. Edit #2: Now I can confirm that the fingerprint sensor on my phone works only every now and then. That ends it for me. A terrible install experience and now this. I'm getting rid of this screen protector. Nevertheless, thanks for your video - it was very helpful, and the best part of my Whitestone Dome experience.

@TheJabberTech

Жыл бұрын

did you increase touch sensitivity in settings>and re-train your print

@Finns-Projects

Жыл бұрын

​@@TheJabberTech where do you change the sensetivery? As my fingerprints seems to ve hit and miss at times also.

@gavanhiga2408

Жыл бұрын

Yup, my fingerprints barely work as well. I did increase the sensitivity and re-registered my fingerprints but they still don't work as well.

@Finns-Projects

Жыл бұрын

@@gavanhiga2408 That's just what my experience is also. witch is a shame. I do have an extra screen protector witch i will try the tips i see others in the comment section saying. But saldy dont have so high hopes

Will uag work with the screen protector

@TheJabberTech

Жыл бұрын

Should

thanks so much for this hack bro

@TheJabberTech

Жыл бұрын

Any time 🍻

Great

Try ringke fusion x please, i cannot find tempered everywhere compatible with ringke. In indonesia dome glass cost idr 800.000 so expensive. I’M afraid rungke will make tempered glass peel on the corner side

@TheJabberTech

Жыл бұрын

kzread.info/dash/bejne/a4J8qtKvp9S0l84.html

any clear case that works with this screen protectors? I've searched ones on amazon but i keep reading comments of the cases pushing up against curved screen protectors like these./...

@TheJabberTech

Жыл бұрын

kzread.info/dash/bejne/nHmt1MlsnKrFmLQ.html

What did the rubber pad over the fingerprint area do exactly?

@akindeleayobami6243

Жыл бұрын

Helps with the fingerprint scanner

@IvanCeballos

Жыл бұрын

@@akindeleayobami6243 i see, but how? Lol

@TheJabberTech

Жыл бұрын

it's a weight dude, thins out the glue over the sensor..I mentioned that in video

@errolosafo4314

Жыл бұрын

Would it not be better when it is rather put there before the spreads. Your opinion. Also what of the pen feel on the screen

Is that a skin you put on your Unicorn Beetle Pro case?

@TheJabberTech

Жыл бұрын

Nope

For those who are having trouble with the screen protector in terms of bubbles. When I did this process on my s23 ultra it took roughly 3 minutes for the screen to be fully covered. One thing they changed from last year is that the acrylic/plastic stick or ruler is no longer used. Which means the process takes longer. Be patient. Saying all this because of what I've read over on Amazon reviews.

@Ughmahedhurtz

Жыл бұрын

I've had these on my last two or three phones and had zero issues. I tried twice to get this to install properly on my S23U and both times I ended up with a 3-4mm bubble right in the center of the screen. No amount of waiting or patience is going to remove a bubble in the middle. Intensely frustrating.

The clarity is amazing but I have struggled with the durability in the sides, in my S22 ultra the screen protector got broken easy

"Just a few steps.. nothing complicated" 20 minutes later.. 😀

Had one on my s21, and just put one on my s23 ultra, I swear by them tbh. They are on a totally different level to regular stick-on protectors.

@TheJabberTech

Жыл бұрын

Agreed 💯

Does this cover the whole edges

@TheJabberTech

11 ай бұрын

No

Can you review s23 ultra quadlock mag case?

@TheJabberTech

Жыл бұрын

possible

What about finger print??? Works good???

@TheJabberTech

7 ай бұрын

Watch the intro

Where you get those wallpapers?

@TheJabberTech

Жыл бұрын

Pinterest

@Jeebus0143

10 ай бұрын

@@TheJabberTech Subbed just now for this comment lol. Link for the tech illiterate folks like myself?

What about ringke fusion x?

@TheJabberTech

Жыл бұрын

kzread.info/dash/bejne/a4J8qtKvp9S0l84.html

Maybe a video on replacing this Dome glass protector if it cracks...🤔

@TheJabberTech

Жыл бұрын

How-To Remove: kzread.infofM9Rl92hc50

Can I get the link the wallpapers, thank you in advance

@TheJabberTech

Жыл бұрын

Check Pinterest

Where did you get that awesome Joker wallpaper friend?

@TheJabberTech

Жыл бұрын

On Pinterest

Which case is the most durable if ya drop it?

@TheJabberTech

10 ай бұрын

OtterBox

How about uag plasma?

@TheJabberTech

Жыл бұрын

Yes

I see no reason for a screen protector anymore. A good case provides the best protection possible while not using a screen protector gives you the best experience in both touch as well as viewing terms.

@hans-petermaier9000

Жыл бұрын

i dont like scratches in my screen

@luigimanfredi2244

Жыл бұрын

Never heard of micro-scratches

mouse case also works with it

@TheJabberTech

10 ай бұрын

Yes it does 😁

It is not necessary to press the weight in the place of the impression. I installed it without oppressing, just waited the right time and it works perfectly, like factory, without increasing sensitivity. Although I was personally scared when, putting the weight, the glass moved slightly in the frame, because the glue is not hardened and slightly leaked at the bottom. Don't worry, just after the pressure time, slide them into place with your fingers before using the UV lamp to cure the glue, nothing bad will happen. That's from my personal experience. And S23 Ultra is my 5th assembly of this glass. I recommend it to everyone, there is no better protection.

@MrRiz157

Жыл бұрын

How about removing it Heard it's messed and cracks

How's the fingerprint sensor after installation?

@TheJabberTech

Жыл бұрын

watch the first 30 seconds of the video lol

is the glass screenprotector curved?

@TheJabberTech

Жыл бұрын

Slightly

So if I need to remove this will it mess my screen up?

@TheJabberTech

Жыл бұрын

How-To Remove: kzread.infofM9Rl92hc50

@Lee-tt9fe

Жыл бұрын

It just peels off leaving the glue on the screen protector and not your phone.

Can you easly remove it without damaging?

@TheJabberTech

Жыл бұрын

Check link in description for removal video

They should makes this even more foolproof....there shouldn't be any "excess" glue if they know the exact dimensions of the screen.

OMG What a disaster! I've installed these before with no problems but this time all the glue spilled out the sides both tries. I don't think that the rig is level. Mine must have been defective. Fortunately with the prep work and everything covered, nothing was damaged and it was fairly easy to clean up, but never again...

Watch from pakistan 🇵🇰 dude

@TheJabberTech

Жыл бұрын

Welcome

Madness

did youre ultra came with a preinstalled screen protector?

@TheJabberTech

Жыл бұрын

No

Wallpaper?

@TheJabberTech

Жыл бұрын

Pinterest

wish I'd gotten Whitestone. I got amfilm and now my S-pen is stuck inside the phone.

@TheJabberTech

Жыл бұрын

seriously!? Damn

@hpguru

Жыл бұрын

Bet your warranty is voided as well.

Phone $800, screen protector $2000. 🤣

just put on whitestone dome glasss screen protector. Followed instructions but got big bubblle near center of screen. Hate product.

Wallpaper plz?

@TheJabberTech

Жыл бұрын

check pintrest

3:53 The sides are not Stainless Steel but Aluminium.

@TheJabberTech

Жыл бұрын

U are correct

Gorilla Victus 2 is better off to be left alone and not covered by anything. Almost 3yrs later with my Note20Ultra and there's like virtually zero major or visible scratches. Not planning on putting anything on my S23Ultra as well. I learned my lesson from my Note8 experience from this kind of screen protector. Never again.

Thank you for posting . ..but way too complicated for me ...glue in phone ? Yikes . I will pass but you did a good video.

This is one of my bigest issues with stupid curved screens. They crack super easy, and screen protectors are crazy expensive while the true cost of those protectors is just few bucks. Disgusting.

Love Whitestone products, just hate the fact that they are not compatible with framed cases

@GrandmasterHobbyist

Жыл бұрын

is that really true though lol...i got a regular glass screen protector for my framed case and it broke in the corner but my wifes is perfect and fine...ordered this anyway i think its kinda jst some people having issues not everyone.

@simplerick256

Жыл бұрын

@Grandmaster Hobbyist I've never gotten tempered glass to fit framed case. Let me know how it goes for you

Why?