I was in despair over a seemingly broken Tab 3 until I followed your instructions. The LCD cable was out by just a small amount and that was enough to have the screen show only a black screen. After removing the cable and then reinserting it in more firmly the screen came back on. Much appreciated for a tutorial that was both informative and easy to follow.

@fiveminuteman

2 жыл бұрын

No problem! 😀👍👍 If anyone does get this probably and you can't fix the screen straight away make sure the tablet is charged. Our tablet unfortunately ran down to 0% battery and since then wont charge beyond 80% but on the plus side no more screen problems.

I need to do mine tomorrow. This is going to help a million.

@fiveminuteman

Жыл бұрын

It's fairly simple to do👍

Thank you for a brilliant tutorial, I did it !! and its working again.

Very informative exactly as required.

@fiveminuteman

3 жыл бұрын

Glad it helped

I connected mine to the wrong voltage, so it shorted. Which part is it that I have to replace?

soft work. 😜🤙

does anyone know why my power button stopped working and my headphones are recognised anymore after intalling the battery? this process is so easy to mess up its ridiculous.

Excelent!

@fiveminuteman

2 жыл бұрын

Great stuff 😃

👍

@fiveminuteman

2 жыл бұрын

Many thanks

Wrong, wrong. You mustn't open this tablet in this way.

@fiveminuteman

4 жыл бұрын

It's fine.no damage no Mark's left.

@NikyRipy

4 жыл бұрын

@@fiveminuteman But that's not the correct way to open it. You must remove the backcover+ case together, not only back cover.

@fiveminuteman

4 жыл бұрын

I have worked on 100s of these tablets and had no problems.

You speak to mutch and not show how to replace the kabel.

@fiveminuteman

2 жыл бұрын

Disagree qnd you would have to be pretty stupid not to understand how to replace the cable.

@The-truth-is-valuable.

Жыл бұрын

@@fiveminuteman - Taking into consideration... it is 1: Lift up connector tab... 2 move (pull) ribbon cable lightly out... SO, how difficult is it to re-insert it? And press GENTLY down the "hingy" black connector "thingy". (Might be a good idea to switch on and test the Tablet before replacing the back cover)

@fiveminuteman

Жыл бұрын

@@The-truth-is-valuable. all worked fine and ribbon cable was in snugly👍

@The-truth-is-valuable.

Жыл бұрын

@@fiveminuteman (I could see that, and I thought you would understand it was not meant for you. It was in support of your reply to him)