So this is where it all started. Pretty cool. You are one of the best in the industry my friend. Keep up the great work and thank you for sharing your knowledge with us!

@PapaGleb

2 жыл бұрын

I came back here to see where it started too. This guy is great and a great example of how proper work is to be done. Love to see how far he has come. Congrats and keep it going man!

Came back to the first video to get know how you started it all. It's great brother. You climbed a pretty quick. Hope the channel will keep accelerating forever.

A charging port replacement job. A lot of things are different if I compare this to your more recent works. Now you solder the front pins first and things look britlghter and clearer under your microscope. Overall presentation is almost the same. The way you speak and the things you say are the same. Like always, nice work!

Back to the future, man your desk is clean lol

Wow the quality of the microscope is way different from the new version 2 microscope ❤

I am watching your videos here and there and I wanted to see, where you began 😁. Thanks for the videos 😁👍

@gastongl404

3 жыл бұрын

same here,i just watched his "5 Ways we get customers in our repair shop and how we started." video and was curious if he had the shop presentation as his first video or something like that :)

@ACOnetwork

3 жыл бұрын

@@gastongl404 but even at the beggining he had goood videos, that is not the same for my ones looool (worse) 😁😁😁.

@gastongl404

3 жыл бұрын

@@ACOnetworkyeah i know how its feel xD , we learn from experience, the more u do the more "confident and professional" u bcm , also he notice that there is some blind spots or things that the viewers can't see so he added more cameras to enhance the video contents

Is this your fisrt video on the channel, i probably watch most of your videos within less than a week, you're amazing man

I'm here after watching your 200k subs video, congratz!

Wow, even for your first video, you’re really professional lol 😄

Watching this now is like watching Family Guy season 20 first then going back to season 1....It's still Peter (Alex) but a pilot version...and Pilot Northridge Fix shop

What temperature is set on your soldering iron ?

Is this your first video. I am fan of you. You are brilliant.

I miss these days. Today is 25 june 2023

@Thex-W.I.T.C.H.-xMaster

2 ай бұрын

No today isn't June 24th 2023... you are mad....

Great job again like always

Would you be able to do this to my tablet I think the port is broken and the battery is damaged and swelled a bit in places

What do you call that paste you put before soldering to remove the charging pin?

@darkwinter6028

3 жыл бұрын

You’re probably asking about flux. It keeps oxides from forming when the solder gets hot; these oxides prevent the solder from flowing and attaching to the pins and pads on the board.

Then and now😊

soldering iron tip refresher wich one are u using sir

I walked into 2 repair shops today and both are looking at videos on KZread 😂😂😂. I wonder what they would do if there wasn't one?

@user-tq7bq3qf3k

2 ай бұрын

Your comment came sounding like a shitty take. Shared knowledge.... We always did this through forums.

I have the same Tablet and it keeps disconnecting & reconnecting to the wifi when the wifi is on. Do you have any simple solutions to this problem?

Very cool person 👍👍👍

Nice job sir

Just wanted to scroll down to your first video, lol

Where can I study to fix this kind of stuff? What career is it called?

@Stranger31st

3 жыл бұрын

Now, their website. I don't know if the website was operational 3 years ago or not. Did you get to learn though?

Osum

My samsung tab 3 charging port broke and it dosent wana charge i think it burned but I need to get it fixed its been a year since we haven't used it and maybe u can fix it for me how much would it cost?

@NorthridgeFix

6 жыл бұрын

Mail in your tablet to the address found on our website at NorthridgeFix.com. Make sure you include your name, phone, and email. Repair cost $70.

@justanotherminority6895

6 жыл бұрын

Meli 4 eva sometimes it’s cheaper to just buy a new tablet or a used tablet.

First ever video on the channel

And at the begining... desk was clear 😂

Whats the cost to fix that?

Cool video

im problme temichar how to fix?

nice jop guys ®

awesome ✌🏻✌🏻✌🏻

i changed but it doesn't charge? thanks for video

@NorthridgeFix

6 жыл бұрын

Test the voltage on the component connecting to the 5V pin to make sure voltage is reaching. It not, then connector may not be soldered on properly. Look at the whole area around the charging port and make sure you did not knock off any components during the process. I'm assuming pads and lines are good.

i have no interest in computers . why i am addicted to your videos . please tell me.

10/2022😉

Came here at 202.000 subs.

My samsung tab 3v isnt charge what i gonna do?

@NorthridgeFix

6 жыл бұрын

Charging port needs replacement as you see in the video. You can mail in your tablet for repair. Address can be found at NorthridgeFix.com

@klaasj7808

2 жыл бұрын

throw it away

my Samsung Galaxy tab 3 it's not open but full charge please solution for it

How young are you here haha. The hair on top is all dark :D

What is allo or alloy all I see is solder and Flux

@darkwinter6028

3 жыл бұрын

Low melt solder. All solder is an alloy (a mix of metals); and he just dropped the “low melting point solder” part because it gets to be a mouthful to say over and over.

5 Oct 2022

The FIRST VIDEO 🥵🥴

flux name plz

@darkwinter6028

3 жыл бұрын

Not sure what he was using back then; but now he’s using one of Amtech’s gel fluxes.

Sits silent!! no explanation for anything EG: what temps are we talking, whats the Gel stuff, whats that Copper stuff, what are you doing with it? Good Video but for someone wanting to know how to do this...completely useless.

@NorthridgeFix

4 жыл бұрын

This was the very first video posted on this channel. We came along way since. :-)

@darkwinter6028

3 жыл бұрын

Gel: Flux; it makes solder flow and attach to components. Temperature: varies depending on your iron, and what solder your using; I personally run about 280C with standard 63/37 leaded solder, but low-melting solder can run as low as down around 100C or so. Not sure what you meant by copper stuff... perhaps you meant the low-melt solder he added first? He did that to keep the solder liquid longer without the iron there; so he could just lift the part off the board.

Is this a scam

Alloy my ass....!!!

its ok showing the video but you have missed the most critical part of the video witch is showing how to open it so poorly made video big thumbs down for me, sorry

@NorthridgeFix

3 жыл бұрын

I agree, It was the very first video I did on youtube. Seems like it was only yesterday.

@pierpi6715

Жыл бұрын

I have been watching your video for only one year. Fatastic to see your very first one!