Thank you for actually putting different Glocks in the holster and showing the play. Very helpful. Just bought my 34 sized holster for my 19 so I'll be future proofed!

My 509 tactical 9mm BLK fits in this holster perfectly. Awesome content man!

Thanks for the info! Just picked up a 6360 for my 34 & 45. The movement I was getting with my 45 was driving me nuts!

@aarongorton104

3 жыл бұрын

What was the part number for the G46? Can't seem to find it

Great review..Keep it up..need more content..keep them coming brother😎👊

Don't stop making videos Sir!

Really good explanation. Thank you.

Foam mountain bike grip cut down to size fits in that cap pretty well.

Thank you for the review. I am getting this holster for P320(s). I am probably going to be using mine with a Sig P320 Carry with a threaded barrel. I also have a P320 full with a threaded barrel, which based on your review won’t fit with the threaded barrel, but when I put the stock barrel in it shouldn’t be a problem.

@jeffroalpha700

9 ай бұрын

You can remove the barrel plug on the 6360. It will allow you to use both barrels. This is something you cannot do on the 7360 without completely dismantling the holster, which isn’t recommended. The versatility of the 6300 series makes it one of the best holsters Safariland has made to date.

@armeddiver

9 ай бұрын

@@jeffroalpha700 Thank you for the response. Good to know. I will check it out.

Man you look familiar! You also look a lot like this guy I went to high-school with. Thanks for the information

Thanks for the info. Also can You confirm whether or not the m&p version will fit an s&w sd9ve I've heard that recently. Thanks!

Will tightening the retention screws also help mitigate wiggle with smaller guns?

thanks for the video man. It may be a stupid question but, did you the holster with try other pistols that have similar ejection port dimensions as the glock?

Same holster fits the p10C with suppressor sights, TLR VIR II (for running nods) and a red dot obviously. It has the same little bit of wiggle and it’s very tight at first, which you can either heat up a bit or loosen the bottom screw and keep working it until it loosens itself.

My understanding is that knob sticking waaaay out where the trigger guard rests is whats supposed to adjust that slack. Also the way you left the holster at the end is a level 1. Apparently the # of motions it takes for you to get the gun out is how you count the levels.

The acro does fit it, irons forward or rearward, the protective hood doesn’t close all the way but that’s not such a major loss for positive retention

@RegimentJoker

Жыл бұрын

I hear you can relocate the hood to the holes above to make it fit, is this true?

FYI: The RDS Hood works in the rain to keep your optic 's glass from taking on water, dust and debris. If you train outside then that hood might be for you. Level 3 retainer might be for you one of these days...lol

I use a g34 with 509t and x300turbo for duty gonna be adding a pmm comp as well

I want to get a Safariland duty holster I have a glock 19 with an surefire x300u and rds im not sure what one to get i want the als and sls and the rds hood can someone tell me what holster will work in thinking the 6390rds ?? Please help

Does the SRO fit in that? On the website it says the SRO is not compatible

Ok, very well done vid. Perhaps u can give me some insight. I carry a 1st Gen M&P .45 with 4.5" barrel. Its been VERY difficult finding a modern ALS type duty replacement holster for it. I'm currently still using the Blackhawk SERPA non light bearing, index finger release holster which is 17 years old. Do you know of ANY holsters which will accomodate this pistol? Thank you.

Which Safariland holsters are good for M&P full size (both 5" & 4.25") pistols (9mm & .40)?

Some Safariland holster that goes well with my Bersa Thunder 9 HC 4.25 Barrel? I tried with models for Sig sauer p226, Glock 19 and Beretta px4 storm full size and doesn't work...

Will CZ p10c models fit the Safariland holsters made for glock 19?

I'm wondering if this holster fits other guns, I've got a sig and a glock would it work for both 🤔

Do I need a 17 holster as I run a threaded barrel and comp on my 19

Is it light specific? I’m ordering one on optics planet to save money and it says x300/tlr-1hl 🤷‍♂️

Can you tell me if this holster will fit a CZ P10c?

I need to pick one up for work.

I have a Glock 34 Gen 5 with a Zev Orion slide, a Holosun 507c and a streamlight tlr HL. will that holster fit my gun?my iron sights are behind the optic. From rear the slide the front of the slide it's ironsight, optic, ironsight

Can you screw the thumbguard aswell for level 2 retention?

Will it work with Poly80 or GGP pistol?

I have a polymer 80 build with a Glock 34 length barrel from Zaffiri precision. With this holster fit?

Anyone know if there is one that fits the Gen5 glock 22 with an rmr and light?

Will this work on a Glock 30 SF I have a Romeo Red Dot in a Veridian green laser light.

but will my p10c with rmr and x300u fit?

Does a gen 5 glock 47 with x300u light fit in that same holster as well?

Will this holster fit Sig P226 w sights and light? Thanks

Hey just subscribeD, but will a P320 X5 Legion fit this holster?

Im needing to know if a strike 80 frame with the TLR-1HL would work it's like a p80 but since the g19 works I assume the strike 80 will. If anyone knows definitively let me know please. Thanks.

Does it fit a g19 with suppressor sight?

Maybe someone could answer this, I have this for a G17, would a G34 fit in a 17s holster?

awesome video - Whats the difference between this and the 6390 RDS ?

@musastore4981

3 жыл бұрын

Sorry for the late reply. We were in the middle of switching out social media managers. The 6390RDS is made for the 17 but fits all 19 style models.

WILL YOUR COMPANY MAKE A HOLSTER FOR THE M&P 2.0 5 INCH..?

Will this fit the P80 fullsize frame?

Will this holster be good for the Glock 45 tactical? Help

I have the same holster, but I run it with a comp’ed Glock 19X. It’s the same length as a 34 at that point.

@ryrysinger

9 ай бұрын

Which comp? PMM?

do they also hold in place when there is no light attached to the gun?

Any idea if this model, even with slight modifications.. will fit an M&p 9 2.0 spec series with threaded barrel?

@daltonanderson3457

Жыл бұрын

I know this is quite late, but no it does not. I just tried it and the trigger guard on the M&P is too large.

Could you tell me, if the beretta 92a1 with streamlight tlr-1 hl light, and with rmr trijicon is compatible with this case

@musastore4981

3 жыл бұрын

It's not compatible with this model holster but I think Safariland makes one for the beretta.

I see that the 19x doesn’t fit as it should be. What do u suggest instead? I’m asking for my 19x

What kind of foam did you use?

Does this holster fight a glock 40? Thanks

I got a xd45 w/ x300 lbh 6360, i wanted to downsize to maybe a balder olight, i think it should fit but anyway i can check before i spend on light that might not fit?

@dkveracity65able

Жыл бұрын

Got the olight baldar pro on my g34 and it fits the holster fine, snug.

Can I please have a short list of different lights that are compatible with the holster and glock 19?

@TYMGhosT

3 жыл бұрын

The light models will take X300 and anything smaller. Tlr 1, other surefires, Inforce etc

Does anyone know of a holster that will fit a G17 with a Steiner MPS and an x300

Can I use this for a gen 5 Glock 19 with a TLR7?

A Beretta APX cabe nesse coldre?

What about the canik tp9sfx will it fit ?

will it fit glock 17 with compensator

Does it fit Glock 17 with lapg weapon light

Will it fit my G21?

Hello, Will it fit a Glock 20 with Olight Baldr pro R ?

Is compatible to sigsauer p320 9mm?

Does it fit the long slide 17??

Will an OLIGHT MINI BALDR fit?

Will a Glock 21SF fit this holster?

Will this fit a g23 gen 5

Can a holosun 407c fit?

DOES THIS FIT GEN 5 G34?

will it fit for a hk vp9 L, thanks~

Anyone know if this holster fits the Smith & Wesson M&P9 2.0 with an Aimpoint ACROP2?

Does it fit a Glock 21 sf .45 w light ?

Can it be modified to accept 17L? What's the best comparable (lvl 3 duty) option for a 17L with RMR and TLR-1HL either modified or not?

Idk if anyone has had this problem but I feel like I have to put my firearm in a angle. When I holster my firearm it’s not a smooth fit. I have the glock 17 holosun 507 with Tlr1 hl light

Im looking for a holster for a Springfield xd 9 when tlr-8 light attachment. Do you know any brands ?

@matthewscott7959

2 жыл бұрын

A better gun

After hours of trying to figure out if one will fit my Shadow Sytems DR920 Elite I hope the 6360RDS will work. Anyone had success with-it fitting? thanks for a great video.

@user-tp3vf3zf6x

6 ай бұрын

Did it ever fit?

Could you do a video of which CZ's fit? I have a p 07 & 09 with x300u. Doesn't have to be this particular holster model, but a safariland holster.

@JsilntParkour90

3 жыл бұрын

You ever find out what works best for that p07 with the x300u?

@pbsaint

2 жыл бұрын

@@JsilntParkour90 No one has suggested anything :(

@nc_rider_7046

Жыл бұрын

@@JsilntParkour90 cz p07 and the cz p09 will fit the same holster

@nc_rider_7046

Жыл бұрын

@@pbsaint I looked on Google and a reddit feed pop up with a guy saying that the sig p320xr will fit cz p09. He also had a video showing his claim

Why I type in xdm 3.8 safariland holster an he keeps saying Glock

How would the 19X do without the light in THIS holster?

will a Glock 17 with extended barrel 3/4" fit

I wonder which one is good fit for FN509C tactical with red dot and Olight Baldr S.

@mosleywellington7434

Жыл бұрын

I have 2,Fn 509 tactical and Fn 509c tactical ,and always have a problem finding holsters I like for it.

anyone know if it fits an SRO? im sure it would since i see comments that say it will fit an ACRO, but it just wanna make sure before dropping 550 bucks lol

Any idea if the Glock 41 with TLR-1 will fit? It's a nightmare trying to find a quality holster.

@chromosomehoarder6927

Жыл бұрын

No the frame is to long Dara makes a holster that should fit the 40 and 41 I have one of there drop offset hybrids for my g40 my self

Probably a dumb question but will a Holosun 407c fit this? Also does it hold retention without a light for a glock19?

@patrickmonte2094

3 жыл бұрын

I just got my 6360rds and it fits my Glock 19 gen 5 with and without my light.

@alexgranado2374

3 жыл бұрын

This is a late comment not sure if you figured it out yet but the Holosun 407c fits just fine in this holster .

Thanks for the vid. Do you think the little "give" with the smaller glocks like the 19 would be noticeable when doing a lot of running?

@seancreed3308

3 жыл бұрын

I’ve used a similar safariland holster made for a Glock 17/22 with weapon light to carry a Glock 19. I have noticed this give he’s talking about but only when holstering or drawing. Although it can be moved up and down by hand there is enough friction in the holster in my experience that it does not rattle or bounce around when running. If you would happen to have that issue in sure it could be resolved by tightening the tension screw on the back side of the holster. However, even when holstering the 19 without a light attached I have not had any issues with rattling or free movement. It seems to still be retained very well.

@seancreed3308

3 жыл бұрын

By the way I noticed it mostly when holstering the weapon not drawing. I haven’t found it to have a significant effect on my ability to draw the weapon.

It fits the shadow systems mr 920 also

@user-tp3vf3zf6x

6 ай бұрын

What about dr920?

I bought the 6390rds for a glock 34/35 surefire x300 but i noticed when i got it, it says 19/23 on it? Are they the same holster despite knowing both fit?

@richieewinns

8 ай бұрын

Update for those curious, new or need answers that i couldnt find: Completely different holster and I received the wrong one from amazon. The 34/35 is a diff sku from 19/23 version and of course is longer.

Anybody no if a S&W sigma 40 cal will fit an any of these holsters.

Why does no one differentiate between gen 3,4 and 5.. that’s my question with this holster that I can’t find a damn answer anywhere will gen 5 work with this holster or not anyone know

Is the 6360 RDS the same as the 6360-832 that has nor red dot compatibility? Do they both have the same gun compatibility?

@lambchop6210

3 жыл бұрын

Same gun compatibility just no rds. I'm dealing with big daddy unlimited right now because they advertised their product as a 6360rds but its was a 6360-832. So now my gun with an rds obviously doesnt fit.

@condorhigh2310

3 жыл бұрын

@@lambchop6210 My 34 didn't fit in the one i bought from a dude on facebook only because it was too long. I said fuck it and took off that barrel plug and heated it with a hair dryer then just remolded the extra inch to the 34 slide. Fits like a glove and locks into place perfectly. I was not gunna buy that damn holster new. I saved $180 bucks buying ot for $45 from the dude on Facebook. Lol

What size would be good for glock19 with a light

@musastore4981

3 жыл бұрын

Sorry for the late reply. We were in the middle of switching out social media managers. The ideal holster for your question is the 6354DO 19 model, on our website.

This holster also fits my czp10F

@leonjrIII

Жыл бұрын

With a light? And if so.. which light?

Will my M&P 2.0 9c 4" barrel with the streamlighr TLR7 light fit this holster? Thanks in advance

@DET_C0RD

3 жыл бұрын

As long as your M&P is the double stack version (I’m not as familiar with M&P as I am with Glock) you should be good. Just be sure to get the safariland model for your M&P, some people get the Glock models thinking they work with everything and they don’t. But pretty much all the lights are compatible with the safarilands tho.

@d10dozerman2

3 жыл бұрын

@@DET_C0RD I ended up buying a Safariland 6360-2192 holster made for the M&P 9mm 4.5"bb. My pistol is the M&P 2.0c 9mm 4" bb with the TLR7 light on it. My pistol fits great in the 6360-2192 with or without the light on it. There is very slight play (3/16") up/down in it if any at all. If a person wants a snug fit all they need to do is tighten up the retention screw on the holster below the trigger guard. Hopefully this information helps other people out. 😎

@MrSocomusnavyseals

3 жыл бұрын

@@DET_C0RD I ordered one for my G19 and TLR-1,if I change my light to x300 or the TLR-1 HL will it still fit?

@DET_C0RD

3 жыл бұрын

@@MrSocomusnavyseals yeah most definitely. Might fit better with the x300 honestly. I put a little piece of foam in the bottom where the lense would sit because I didn’t like the rattle it had with the tlr. But that’s just me, I’m picky.

I’m sorry to be that guy but do you know if an M&P 5” 9mm will fit? (With a tlr-1)

@CannibalWarthog

3 жыл бұрын

No I have both and it does not fit. However, if you get the model for the m&p, that holster will fit a glock 17-19 just fine. The glock slide is just slightly thinner than the m&p slide

@christoperdevore3617

2 жыл бұрын

6360-8192-131 is the model your looking for. It fits my 2.0 5” pc ported with tlr-1hl just fine. It did hit the screw on the light some upon holstering and unholstering. You can either check your light daily to make sure it’s tight or as i did, I heated the area it was catching on and reshaped it slightly. Don’t know if this was due to the pc model or not. It’s the part that intrudes into the opening and acts as a stop for sls. It hits on the back so you don’t have to modify the part that acts as the sls stop. Amazon has them currently in stock with free Prime shipping for 164.64.

It would be nice to know if a cz p10c with light and rds would fit this holster. I’m seeing posts everywhere saying this one and that one does, but they don’t.... it’s frustrating that safariland picks and chooses the weapons they support.... do a cz p10c video please!

@husky701rider9

2 жыл бұрын

Also struggling with p10 holster compatibility. About to switch to a glock 19 for that reason alone.

Let me throw this hypothetical out there. Cause I need to buy one soon. Glock 19 Gen 5, StreamLight TLR-1, BUT with Suppressor Night Sights. Will the 6360RDS handle my Glock since I have Suppressor Sights, that’s all I need? Validation, please.

@jacobsamples8864

Жыл бұрын

Did you pull the trigger in that set up? How’d it fit?

Guess it'd be too much for Safariland to put adjustments in the holsters, or perhaps factory made adapters that could be temporarily or permanently affixed with adhesives.

What would you recommend for a glock 19 with a compensator?

@gabrielkrueger8035

3 жыл бұрын

That’s what I want to know. Would a 34 holster work?

@Protectiveedgetraining

3 жыл бұрын

@@gabrielkrueger8035 i would imagine it would work. I have the strike industries mass driver comp on a g19 slide and it gives it the lenth of a g34, give or take a tiny bit. Im using the blackhawk omnivore in the meantime it works well until i can find a better option for reasonable price.

@nomadthreeonebravo8940

3 жыл бұрын

I'm late to the party on this but Garand Thumb did a video on his Roland Special build. In it, probably about 3/4 of the way through the video, he goes into detail about his holster. I don't remember which gun it was actually designed for but he said it fit perfectly.

Smith & Wesson m&p 9/tlr-1 hl?

🔴 Looking for a holster for the canik TP9SFx with a red dot 🔴