Some info on setup heights before you blow money creating a box of parts you don’t use: instagram.com/p/CgzZdUvr3DI/?igshid=YmMyMTA2M2Y=

@zerofire3172

Жыл бұрын

Do u need the hood?

@appalachiantzonesteel5010

Жыл бұрын

@@zerofire3172 no, it comes right off (and on)

Straight and to the point. Nice video man.

I was just going through the same endless spiral, trying to find the right holster and thanks to you I did

three days ago I pulled the trigger on this holster, and it's in shipping. Tonight I pulled the trigger on a P2 and IMMEDIATELY got scared that I would be buying another holster. This video was super clutch and saved me from thinking I will be spending another $250 on another holster.

@appalachiantzonesteel5010

Жыл бұрын

Absolutely! I did the research but I still needed this stuff in hand to verify, happy to help

Good tip, I’ve been running the SL 6390 RDS with my G17 and ACRO P2 for a while, I didn’t think to put the hood to the second hole position. Great tip, thanks 👍

@Barnes828

2 жыл бұрын

The second hole for the hood is meant to be the “latch” notch so the hood has tension when shut

@theexpatgunner

2 жыл бұрын

@@Barnes828 Yes I noticed this when put the hood into the second hole, it became easy to accidentally close the hood which would be a problem when attempting to re-holster. I’ve since put the hood back in it’s originally position so it cannot close unintentionally. I hope that larger OEM or aftermarket option becomes available in the future. But even as is or without the hood, the 6390RDS is still a great option.

It’ll work in the 6354DO, all you need is a hair dryer to mold the kydex

I believe the optic hood has changed like you said, my 6390 doesn’t have a second set of holes like yours. Good thing I didn’t order a 6354DO because I didn’t know that the ACRO doesn’t fit it. Wish I could get my hands on a damn P-2!

@appalachiantzonesteel5010

2 жыл бұрын

Thanks for the confirmation! A few comments since yours say it works with a hair dryer which might be a cheaper option for people since they’re finally prevalent on the second hand market. I’m sticking with the 6390 because I already bought it and my monkey brain simultaneously doubles down on poorly researched purchases AND a rear window cover.

@LiquidForce392

2 жыл бұрын

@@appalachiantzonesteel5010 how are you liking the P-2 so far man? I can’t believe they’re taking this long for a larger release

@appalachiantzonesteel5010

2 жыл бұрын

@@LiquidForce392 Really good so far, I don’t see any downsides to it at this time. The RMR is the only other dot I’ve got time on (outside of just trying the other major players) so I can’t really compare. Looking through the mailbox is easier than the RMR for me, but im hoping it’s just because I’ve improved my presentation, maybe? I’m also shocked they’re not pumping them out, I see this taking over and I’d recommend it over the others if it’s durability stands.

I’m running the same thing, but learned quickly that the extra hole isn’t an extra “setting” but actually cut for two circular notches on the inside of the hood so it has a slightly positive click* and retains its position. My gear constantly opens and closes my hood when I run it the way youre showing, so I would find myself checking its status all the time. Got annoying, so I just removed it entirely. I bought a closed emitter for a reason anyway, lol.

Awesome man thanks for the info I got the mps I believe it’s same footprint

You know you can hit the 54 with a hair dryer to widen up the narrow section and the P2 fits like a dream. That’s what I did at least 🤷🏽‍♂️. Also getting it directly milled to the slide is 10x better

@appalachiantzonesteel5010

2 жыл бұрын

Shit… yeah, I didn’t know. I also didn’t find the 5 in-depth and high quality comparison videos of the 6354/6390 until now lol

@bobsmith7916

2 жыл бұрын

What are the in-depth videos you are referring too?

@colerogers6816

11 ай бұрын

yeah or you can just file/dremel the left lip thats holding it back /to tight .

You can also use the low ride UBL with the 6390 which is about the same height as the mid ride UBL with the DO. I

@bobsmith7916

2 жыл бұрын

The low ride is worth it for the 25 bucks.

ACRO P2 will fit in a 6354DO (X300U/RMR) with some slight modification (it involves a dremel and a steady hand and a heat gun for that tab next to the ALS release, but it DOES work

This is the exact video I needed. Hopefully it works with the Steiner MPS too (I wasn’t as lucky as you and can’t find the P2)

@appalachiantzonesteel5010

2 жыл бұрын

It will. We’re here for you! Free beer for all the Ruggers.

@joshwatts4177

Жыл бұрын

Casey are you still looking for an Acro P-2?

The 509T and the Steiner MPS will fit in 6354DO holsters without modification.

My 509t direct milled to my G45 fits the DO & 6390rds with 0 mods . My RMRrm7 direct milled to my G19 will not fit the DO however . I need to mod the DO still 🤷🏻‍♂️

Hey awesome man. 👌

Ive had to find the holster i need from forum posts. Holster finder works some of the time

I’m noticing the safariland do holster is rubbing on the push buttons of my 509t

Thanks bro. I'm trying to figure out if my 6390 RDS will fit my gun with the trijicon RCR that I (back)ordered. Holster Finder says I need the RDSO) but I'd love to save the money if it'll still fit.

@appalachiantzonesteel5010

6 ай бұрын

Haven’t cross referenced the dimensions but it looks similarly sized to the P-2 so the 6390 should be sufficient. I’m basing that off side by side comparisons I saw on instagram but I’d go with the 6390. As you already know the holster finder sucks.

do you still have the 6354DO? i want to get it

I’m Getting the 6390 RDS holster for my 19X with the Acro P2. Which optic cutout did you get one your holster since it doesn’t give the Acro p2 optic as an option. Thanks!

@appalachiantzonesteel5010

Жыл бұрын

I think I chose Holosun 509T, but I honestly can’t remember. My logic was choosing the largest optic on the list. Based on other people’s posts I don’t think you’ll have an issue with a 6390 RDS because it’s the ‘DO’s which have a narrower optic cutout/area.

@ericm125

Жыл бұрын

Thank you! I really appreciate you taking the time to reply.

Thank you

Where did you order the new Acro from? Lol my order keeps getting pushed back smh

@ChineseSweatShoppe

Жыл бұрын

Sounds like you went to optics planet 😂

The ALS system works fine with this set up? Locks in and releases fine?

@appalachiantzonesteel5010

2 жыл бұрын

Yes, with this specific holster: 6390rds and G19/x300u/P-2. Other comments below say it works with other setups as well.

Awesome I have been trying to figure this out for days. Still waiting in a p2 to come in stock somewhere aimpoint says soon so fingers crossed. Still got that other holster?

@appalachiantzonesteel5010

Жыл бұрын

Hope it’s soon! I actually decided to keep it because I found a cheap slide/RMR combo. I’m pretty much working backwards now lol

@beachdrugpanda

Жыл бұрын

@@appalachiantzonesteel5010 i would have done the same i am worried about switching from my rmr i hope its not too weird for me. The Appalachia in you channel name just made me think you were probably close so it'd be a easy exchange and I'm already set up for safariland holsters on range belt. Like your videos I need to upload more thanks for the great information

@appalachiantzonesteel5010

Жыл бұрын

@@beachdrugpanda you’re going to love the P2. The RMR was the only optic I’d had a considerable amount of time on and I think the P2 meets or exceeds it in every way. Only issue is finding one.

@beachdrugpanda

Жыл бұрын

@@appalachiantzonesteel5010 thats awesome to hear man thanks

@joshwatts4177

Жыл бұрын

@@beachdrugpanda You still looking for an Acro P-2?

Does a Glock 19x with Steiner mps and x300 fit?

Can you fit an sro in the 6390rds without modification?

@appalachiantzonesteel5010

2 жыл бұрын

Yes

What optic did you put in on their website to get this to fit

@appalachiantzonesteel5010

2 жыл бұрын

just go here and select Holosun 507 or Trijicon SRO safariland.com/products/model-6390rds-als-mid-ride-level-i-retention-duty-holster-model_6390rds

Will this work with my g17 with acro p2 and an x300u?

@appalachiantzonesteel5010

2 жыл бұрын

Yes, if you have the G17 length model or G19 with the barrel plug taken out

Looking to see if this will fit a G45 with an Acro aim point and TLR7a

@appalachiantzonesteel5010

2 ай бұрын

Will fit G45/Acro, doubt it will work with TLR7a because this is for Surefire x300

Will the DO fit a Glock 19 with an inforce wild 2?

@appalachiantzonesteel5010

Жыл бұрын

No idea

What red dot did you select to fit the P2

@appalachiantzonesteel5010

Жыл бұрын

Holosun 507 or Triji SRO

Still have that holster for sale? Will it fit g19 gen 5 with rmr?

@appalachiantzonesteel5010

2 жыл бұрын

No, sorry man, I decided to keep it for that exact same reason! 6354DO is compatible with G19G5 w/ RMR

Do you think the 6360 rds will work for a 17?

@appalachiantzonesteel5010

Жыл бұрын

I’m not personally familiar with that model, but I’d assume so. The issue I foresee if if the bale (spelling?) isn’t big enough it may not go over the optic. It’s got an RDS cover under that so I don’t see why not. What I’m calling the ‘bale’ is that first plastic cover which wraps over the rear of the slide in retention. Not sure if you’re asking this, by the 19 holsters are just 17 length with a barrel plug that’s removable.

Could this work with a holosun eps

@appalachiantzonesteel5010

Жыл бұрын

Yes, I believe so

Will a G19 w/X300 and P2 fit in a 6390RDS G17/G22?

@appalachiantzonesteel5010

9 ай бұрын

Yes

U.S. Duty Gear can help you with all your needs for RDS and lights

lmao, good video thanks for the info

Does 6390RDS fits G34?

@appalachiantzonesteel5010

2 жыл бұрын

Yes, if you order the 34 length model. You can take out the plug on a shorter model, but expect the slide/barrel to protrude.

I’ll buy that holster off of you. Would it fit a 19x?

@appalachiantzonesteel5010

2 жыл бұрын

I believe it would. After the fact, I decided on keeping it for another piece, BUT there’s multiple up on gear pages and t @ c sw ap right now!

@jerz-buck-i8761

2 жыл бұрын

@@appalachiantzonesteel5010 all good, appreciate the reply bro bro

@wittech6116

2 жыл бұрын

@@appalachiantzonesteel5010 can you be more specific on where tan 6354’s are available. Having a hard time finding one right now that isn’t $200

@appalachiantzonesteel5010

2 жыл бұрын

@@wittech6116 The only deals I’ve seen on just the holster were at OPTactical and that was hit or miss. I’ve gotten all of mine direct for Safariland or second-hand. Price and less times are rough, but it’s been the only way from what I’ve seen. You could also snag whatever is cheap and available, then have Ghostmen Designs or someone from IG wrap it.

Help a brother out and hook em up with your Acro p2 plug?

@appalachiantzonesteel5010

2 жыл бұрын

The well is already dry, I tried to order a second for a long gun and found out preorders still aren’t filled #PourOneOut

@autonomousdefense

2 жыл бұрын

@@appalachiantzonesteel5010 damn

Will this with level 3

@appalachiantzonesteel5010

6 ай бұрын

Are you talking about if the holster had a bale?

Call in for Angel and he will help you out

Don't through your DO's out yet. Here is my solution. instagram.com/p/ChpZAgQq-6C/?hl=nl

@appalachiantzonesteel5010

Жыл бұрын

This is cool, but I’m not trying to modify the ALS should I ever have issues

Does a Glock 19x with Steiner mps and x300 fit?

@appalachiantzonesteel5010

6 күн бұрын

Yes, 6390RDS