I’m a 460 magnum Mancannons lover! Thank you for your time creating this content! Great video!

@devildog_iii3492

Жыл бұрын

Thanks bud. She’s a favorite

Original Precision makes a product to plug the Hillary Hole and I have done it to all my S&W revolvers. Love the product.

@devildog_iii3492

Жыл бұрын

Yea this is the only revolver I own w it.. seen one another Marine makes just never got around to it

You can also chamber 45 Schofield and 45 Autorim. So digesting all that means if ammo is hard to find you can find more options with this revolver.

@357Franknitty

4 жыл бұрын

I've also heard 2 inch 410 shells!

@jeffreylocke8808

Жыл бұрын

@@357Franknitty nope 2 1/2 inch or 2 inch 410 will not chamber in it.

Perfect barrel length.

@devildog_iii3492

Ай бұрын

Definitely

I had the 8 3/8 barrel version of the XVR and put a scope on it but was just too much to carry comfortably. I traded another for his version of the XVR in a 5inch barrel. Much easier to carry and combined with a good chest holster it is great. I fiinally found a solid end piece for it to remove the ported one. When out in the woods shooting the ported one my ears hurt for quite a while. With the non ported version most of the noise goes out front making it better. The trade off was a little more recoil but I'm able to handle that quite well. Extremely accurate revolver and love it. I load my own rounds also making it much cheaper to shoot.

@devildog_iii3492

4 жыл бұрын

Yea the chest holster is key for it. Where did u get the ported plug? I haven’t reloaded yet for mine but S&B has 22gr for $1.50rd that I shoot at range

@billhumphrey7846

4 жыл бұрын

@@devildog_iii3492 I got the non ported plug straight from Smith and Wesson

@devildog_iii3492

4 жыл бұрын

Thanks

Good choice. I’m looking for the exact same model. I was considering a 500 mag, but after extensive reading, I’m positive the 460 is the best option for a big bore revolver.

@devildog_iii3492

10 ай бұрын

Good decision. And more flexibility w rounds

I finally have this gun. It's great!

@devildog_iii3492

3 жыл бұрын

Nice! Yea I love it, was just cleaning her too

@jonathansistrunk6260

3 жыл бұрын

That's what's up bro I can't wait to get one

@devildog_iii3492

3 жыл бұрын

They’re sick

Handful, no doubt! The 10.5" shoots VERY nicely, very manageable. 8" will be snappier, and 5" even more so! That said, I NEED ONE!

@devildog_iii3492

7 ай бұрын

They are fun haha

Buffalo Bore makes a Dangerous Game loading for the 454 Casull and 460 S&W magnum with a 300 grain soild copper flat top bullet to penetrate and not deform.

@devildog_iii3492

4 жыл бұрын

Yea I have lots of the BB

What a beast!

@devildog_iii3492

4 жыл бұрын

Love that thing.. haha

Devil Dog I had the face of my 460V S&W cylinder CNC machined by TK Custom and made to use their 45 ACP moon clips. Using Starline brass in 45 ACP and the TK Custom moon clip the 460 Rowland, 45 Super and 45 Winchester magnum using Starline brass also fit the TK Custom moon clip for the 45 ACP.

@devildog_iii3492

Жыл бұрын

Oh nice! I was thinking about the .45

@jeffreylocke8808

Жыл бұрын

@@devildog_iii3492 use their stainless steel moon clips if you get it done. They are stupid strong.

@devildog_iii3492

Жыл бұрын

Cool. Definitely look into it

@jeffreylocke8808

Жыл бұрын

@@devildog_iii3492 if you do please do a KZread promoting and explaining what you learn in doing it. TK Custom are the BEST!!!

@devildog_iii3492

Жыл бұрын

Appreciate it

Handload up to 400 grain Beartooth LFN and WFN hardcast gascheck bullets and you will be ready for anything in that 460V. I love my much customized one.

@devildog_iii3492

4 жыл бұрын

Yea been thinking of adding it to my reload

Corbon 395 grain hardcast is heaviest of factory loads. Over 1500 fps is not bad either.

@devildog_iii3492

4 жыл бұрын

Yea that’s some fun stuff, too bad it’s discontinued

Just purchased the same exact gun today, but I am totally confused on the compensator? I was told that the compensator with the three oval holes in it will shoot everything and the other compensator only shoots led. I have a couple hundred rounds of 45 colt that I will shoot just to get rid of it and I have 454 casul and just purchased 460 Magnum but still not sure which ones I can shoot with the three hole compensator the way the gun comes from the factory I was told I can shoot everything and I can’t find anything in the manual? Thanks for the video any help you can give me a simple terms so I can understand it would be great👍

@devildog_iii3492

Жыл бұрын

Thanks bud. The extended brake is for Lead, when its installed it blocks off the holes on the top of the barrel to keep them from being Clogged by the Lead.

I own the 460V and it is a phenomenal revolver, hands down one of the best by S&W. Are you going to put some red dot optics on it?

@devildog_iii3492

4 жыл бұрын

Not sure what I’m gonna do with it yet. Right now just enjoying the iron sights

@smithn.wesson495

4 жыл бұрын

@@devildog_iii3492 I agree....I got my 460V seven months ago and still using the factory sights as well. I have put round 1,200 to 1,500 rounds through it and it gets smoother with each use. However, I am strongly considering the Trijicon RMR red dots. Yes, they are pricey, but the Trijicon is an outstanding red dot sight.

@devildog_iii3492

4 жыл бұрын

Great optic. I run one on my bedside, have the venom on my carry rt now but gonna go back to rmr. Venom has better view thou

Recoil wise, is it significantly more than a 5 inch S&W 629 Classic that’s chambered in 44 Magnum?

@devildog_iii3492

25 күн бұрын

@@djudson367 I don’t feel like it’s a large margin more no. My 3” 629 definitely kicked less than the 460 but w the weight is fine.

There is a review that said after 300 rounds the frame broke. Do you think it was a fluke? What is the difference between 460 v and vxr

@devildog_iii3492

4 жыл бұрын

The v is a 5” and vxr is a 8.38”. I haven’t heard any issues like that happening. I’m 250rds in w no issue

I would take this on my vacation :)

@devildog_iii3492

4 жыл бұрын

I sure do haha

You still love it? Am looking to get it and can’t decide between 5” and 3.5”

@devildog_iii3492

2 ай бұрын

Yea it’s a fun one for sure. I’d do the 5” well balanced

I’m getting this ASAP

@devildog_iii3492

2 жыл бұрын

Super fun!

i had a 500 smith 6 .5 inch big frame i bouth the 460 smith 5 inch it sure is a lot easier to point and handel than the 6.5 inch 500

@devildog_iii3492

3 жыл бұрын

Yea I don’t miss my 500 much either.

So is it true that the compensator can come loose after shooting a certain number of rounds? I have the 3.5 and the 14 inch Performance Center but I'm looking to get this one too. My local gun store is already working on getting one for me.

@devildog_iii3492

Жыл бұрын

I’ve never had an issue. The only thing I’ve heard is shooting lead will clog the ports of u use the wrong comp

@Padre_Kalibre

Жыл бұрын

@@devildog_iii3492 I love the classic look of this which is why I'm getting another one. The Performance Center versions look like toys.

@devildog_iii3492

Жыл бұрын

@Good Toddler yea true, especially the black and chrome one..

@Padre_Kalibre

Жыл бұрын

@@devildog_iii3492 Update: Just picked it up today. Gonna test it this weekend. It's a badass looking gun. Noticeably heavier than my 3.5 inch.

@devildog_iii3492

Жыл бұрын

Nice. I actually shot mine last weekend and had an issue. The cylinder wouldn’t close and when it did the gun was hard to cock, and some issues getting rounds in the cylinder. Idk if it was dirt somewhere or what. But when I got home it was fine again.. gonna take it apart tonight and check

Since I already have a 500 should I get the 50Ae or 460?

@devildog_iii3492

4 жыл бұрын

The AE is a toy. 460 is useful

@michaelndanga-jerera8559

4 жыл бұрын

young_king_ 21 I recommend 460

@al_wick4282

2 жыл бұрын

Of course you should

@jeffreylocke8808

Жыл бұрын

460 S&W magnum is much more versatile than a 50 AE as no crimp on a semi-auto makes it worse than any big bore revolver cartridge.

You can load 45 colt to match 44 mag

@jeffreylocke8808

Жыл бұрын

Nope! Close but read Max Prasac’s Gun Digest Book of Hunting Revolvers

I can’t choose between this or the 500

@devildog_iii3492

22 күн бұрын

@@hondarider100r I’d do 460, can shoot different rounds, more velocity than the 50 etc

I want this as my first gun for home defense

@devildog_iii3492

4 жыл бұрын

Interesting choice.. haha

@sampakpahan6749

4 жыл бұрын

@@devildog_iii3492 yea I'm thinking this or 629 or686 plus

@devildog_iii3492

4 жыл бұрын

Why not something w more capacity? They’re all great guns thou

@sampakpahan6749

4 жыл бұрын

@@devildog_iii3492 true that's a big factor. 686 plus holds 7

@devildog_iii3492

3 жыл бұрын

Truth. My 590A1 is my go to

Did S&W take care of your cracked grip on your S&W 629? You posted that video about 2 years ago.

@devildog_iii3492

4 жыл бұрын

Yup. See other comment

How do you fix the Hillary hole?

@devildog_iii3492

Жыл бұрын

Gut the lock and there’s a Marine that makes plugs for the hole

When can I try it?

@devildog_iii3492

4 жыл бұрын

Right now!