PLEASE LIKE THE VIDEO! ALSO TELL ME WHAT CAR YOU WANT TO SEE IN THE NEXT VIDEO!!!

@joseguereca1107

8 ай бұрын

The blazer

@WhiskeyDents

8 ай бұрын

Blazer and why don’t you just recline the seat back a little bit

@rickyhutchison7893

8 ай бұрын

Blazer!

@tommycook9620

8 ай бұрын

❤❤❤ BLAZER

@bazilwreckerloughead

8 ай бұрын

Haven't seen the Blazer in a bit!

Casey! Make the body flip up on a hinge like a funny car! Then you can get to the engine super easy and it would be nuts at a car show with the body up 😂

@ryanmcclendon3309

8 ай бұрын

I said that a few videos back!😂🤙🏼

@streetlegalbuilds7644

8 ай бұрын

Probably should just to make it easier to work on lol😂

@richlucasjr9116

8 ай бұрын

100%

@ryanmcclendon3309

8 ай бұрын

…just don’t forget to lat..I mean put the pins in!😆

@redfoxifithegamer9255

8 ай бұрын

Pleaseeeee

I had no idea Mitch McConnell was thinking about a mid-engine V-8 swapped 1990 Honda CRX. All this time I just thought he was having a stroke or seizure.

@CaseysCustoms

8 ай бұрын

Nope gotta give him a break he was day dreaming about hot rods like the rest of us. 🥴🤣

2:50 “That’s a little too crazy for me…” Casey said, while looking at a slammed,V8, RWD, custom framed, CRX…

@CaseysCustoms

8 ай бұрын

🤣🤣

If you ran tubular upper A arms that might give you more room to move the motor forward. Just a thought.

@ryanmcclendon3309

8 ай бұрын

Like a mustang 2 with tubulars, hella more room. Those uppers are chunky af

I thought that you would have hinged the body so that you could lift the front up and access the engine. Top fuel dragster style

Before you do the floor you should get driveshaft in and run exhaust. Be a lot easier welding exhaust wit no floor. Easier to run brake lines get it all done then do the floor.. just a thought.

@8ewb5

8 ай бұрын

This is really smart, specially cause he wants it on the ground, can tuck everything up then build the floor around that!

@Squeek_is_back_at_it_again

8 ай бұрын

I 3rd this

Three things. 1. Dry sump oil pan. May get the motor lower and possibly allow you to run the cross member under it giving you some movement forward if needed. 2. Parimiter frame. Run the frame out to the side along the rocker. Lets the floor pan be on the floor with the frame giving you more headroom. 3. Seat track do nit need to be on the bottom of the seat. Mount them anywhere on the side at most any angle and bracket them so the seat is tight to the floor. Or, separate seat bottom and velcro to the floor. Attach back to the roll bar with some sliding adjustability.

Love that motor placement, so much better than where it was!

What about factory injection off an old Camaro ❓ that would put the throttle body out front and allow you to snug it up as tight to the windshield as you want to . ✌🏼💚🙏🏼

@chrisblock4198

8 ай бұрын

Tune port injection. It’s an option

Every day im at the edge of my seat just waiting for the next crx vid. This car is amazing to the max

If you wanted to reinforce the crossmember a little better, get rid of the crankshaft pulley so you can reinforce that crossmember where it was and just buy an electric water pump. If you need an alternator they make alternators that you can actually attach to the rear differential that will rotate with the axle. That way the alternator is charging the battery while you're driving.

HELL YEA CASEY 💪 😎

The amount of work you're putting into this car is crazy. Feels like you're reworking every inch of it twice! So fun to watch!

Let's goooo!! I'm working on my crx right now your the reason I started recording KZread videos on it 🔥

Damn, Richard... Mitch... I cried!!!

Again, this is why you build a complete frame. No screwing around. Build the frame to suit your needs.

Hi Casey try to source a Mugen Power pro 2 body kit for the cr-x. I believe wings west has some reproduction of that exact same body kit and it makes the car significantly look lower eventhough it really isn't.

Too add, man seeing your builds. Literally are inspiring for the fact that it's all diy.

Ground effects kit.. its bigger bumpers and side skirts so you can get a lower car or truck without lowering suspension

This is the only guy that says he's going to build something I know he can and will he does some amazing stuff

Richard...you are fired for the repeat frames in the first few minutes...don't even try to blame Casey for the late footage.

@stomper2582

8 ай бұрын

I thought that was me bumping my screen.

@CaseysCustoms

8 ай бұрын

Oh shit give me time stamps I’m not seeing it

@robertolerota4234

8 ай бұрын

It's just redundancy, not a repeat clip, though it could of been edited out lol

@worthshop

8 ай бұрын

2 minutes repeats twice

@210_Today

8 ай бұрын

I thought it was me…on the toilet accidentally tapping the screen 😂

This thing is a beast. I had a quick idea if you cut the front cross member out, move the motor forward, and use engine plates (can't think of the technical term) as a way to mount the motor and also as a cross member. Just a thought. By the way, coolest build on KZread. Absolutely LOVE IT Crx's are bad ass.

@trillrifaxegrindor4411

8 ай бұрын

you used the right term

@jordanbest3926

8 ай бұрын

Front suspension is in the way to go that route. If you moved the engine far enough forward for the plate the weight distribution is all outta whack. minimal room for cooling as well

I love this little car!! I have 3 English Ford Anglia project cars. You are a real inspiration to me. Thanks.

It's going to look cool with the ground effects!

i think you should move the hinges for the hood to the front to make servicing easier. would let you get right up on the firewall

Instead of a rear mid engine sports car. It looks like it's gonna be a front-mid engine sports car, which is really good.....If I knew what I was doing and had some money. I'd like to move the engine a little more forward for easier service access. But still keep 3/4 the engine & it's weight behind the front wheel axle line & mount a manual gearbox in the back directly to rear differental. For great weight distribution, having more weight of the gearbox, rear diff & gas tank over rear wheels for more grip.....This CRX is gonna be awesome. Kinda also really like the idea of a lightweight high revving, high HP, Honda k24 turbo engine up front with RWD and rear mounted manual gearbox. In a lighweight CRX.

The absence of thrown hammers seems deliberate at this point....I've cried all my tears away

Super cool man, lovin the build!

I'm not jealous at all. Love watching all your builds and blows my mind how u managed to keep on budget with them 💪👍

You must run premium gas. In case you don’t,Crappy new gas has a lower boiling point and causes vapor lock. So a phenolic spacer is needed. So don’t forget that in the equation. I feel like you know all this tho. Love this build. Please do donuts in it when you’re finished.

Love you including the crypt keeper monster McConnell lol

This thing is awesome the stance looks great!

Why don't you weld like an upside down custom c notch. For where you're trying to accommodate for seats. Like weld it in then cut the frame. It'll keep everything squared. And then just cap where you cut the frame. Hope you get the idea.

Silly Civ is coming along. Yep, coolest car you’ve done. Love Silly Civ.

I like this build. Its is coming together now. It is so freaking cool.

You need a tubular front cross member to move it forward!!

If you put underdrive pulleys on it your crank pully will be smaller diameter. Might be able to move it forward more

Do like Ian Roussel did with his radical rod, have the body from the firewall back lifting up funny car style and have a tilt front.

This little car makes us happy too Casey!

Thanks for teaching me this kinda stuff wow.

Can't wait for the finished product!! Great build.

Makes me happy too! Love it

This build is coming along sick! Loving it! With all that room up front, you gonna throw on some turbos?

I love this build more than any other!! So excited over it!!! You should do a RX7 next😳💪🏾

Looks amazing Casey

love seing your love for a honda crx growing each episode 😜

Again love your the way your mind works.

Awesome!!

Looking awesome Casey pretty cool man. 😎

Lovin it, its rad 😊👍

Love it!

The coolest build ever

Can't wait to see it all done gonna look sick, mate 👌

This thing is going to be so awesome

Love you found the new Vega!

Man, it's looking badass 🤘

Soo cool!

This car should be fun to drive and it is already looking good.

I’ve been waiting to see this vehicle since I was about ten in the 90s

Another excellent episode….

You do some cool sh*t!!!!!!!!!!!! Love the CRX!!!!

She's looking good!

Thought. I notice the nuts on top. If by chance, bolt and nut come loose, the gravity would cause the bolt to fall out. Put bolt in from top. So if the nut becomes loose, the bolt will not fall out. Just thought. Love your channel!

Maaann !! Cant wait till you finish !!!!

Can’t wait to see how you cut up the frame and continue this build

Great work love your work

@CaseysCustoms

8 ай бұрын

Thank you very much !

I can't wait to see this finished.

You're insane literally I love it 😂

So badass.

Speechless 😮, new subs ❤

Crx is looking good

That is going to be so fun to drive

You’re a mad man. 👍🏽

Really nice build bro 👌🏻 i really enjoy watching your video's ! I know my opinion doesn't really matter but the old wheels made it look more agressive✌🏻😁

Sick ass crx!!!!!!!

Love it

Why don't you cut out that engine crossmember and build you one out or round bar tubing then you can move the motor down more and more forward and plus it will give you more of a better angle for your steering rack

I love it.

a 4.3 v6 s10 has a throttle body intake that you can use and add a cone style filter where ever

It’s not even done and I love this thing I fxxxing love it

Im speechless too 😂

lol I can tell the editor had fun with this one

Gotta take to car shows people will go crazy!!!!👍🏾

You can bring that motor forward a lot more find a different oil pan and move the steering down or to the rear you can do it

Why dont you run a LS with fuel injection? Would save space up top as no carb, valve covers are shorter, and run a car intake, and you can run a car oil pan and it wont hang way down

Casey this build is so bad ass. But for real make it so that it’s like the old school pro mods with the flip up body’s.

And here.....we.......go!

Look up Jeff Lutz jr. He has and Eg civic with a small block in it. Graf and drive car. It’s wicked cool

Casey, it's so funny that when your working on the Honda, I always look over your shoulder to admire that SWEET '67 IMPALA, The Supernatural's "Baby". I can't keep my eyes 👀 off of it because it is so cool and mean, a perfect car!

Get you a spool of flux core for when gas runs out

Carona and I love this!

Comment for Casey love the channel

This may be stupid … but reverse your door hinges to the B-pillar then cut your body on the roof line like the K5 Blazer and then cut through the rocker and you can tilt the entire front of the car up to Service … just have to fab a bunch of supports / reinforcement … but at the end you can tip the entire front of the front up and have reverse opening doors :) might be stupid … but you could service the engine ….😂

You should add an American style cowl hood. Dude at my h.s. had a crx with cowl hood, looked awesome.

Just get a LS 4.8/5.3 with a low profile intake manifold & you save a bunch of room & get rid of a shitty Carb...

I don't know why but I love this car.

You should run after market bucket seats from NRG or Recaro, that might be able to lower your sitting position quite a bit.

Awesome position for the engine just one more thing if possible do efi and slimmer intake

Looking good. I am making plans for my 96 accord

@trillrifaxegrindor4411

8 ай бұрын

go a different route and add a v8 fwd system from an impala ss to the back,transaxle,engine and all......

@workingmansrestorations7071

8 ай бұрын

@@trillrifaxegrindor4411 good idea... I am going to check into it. They have police cars with those specs?