Wow, that's the best repair job I've ever seen. I've got a similar problem. thanks

The nuts just started still for you? You're a magician plain and simple

Wow that is a great belly board- mine is more like a woven plastic fabric. I like this better.

That's one way to do it. I would suggest just cleaning the perimeter of the cuts with rubbing alcohol and using Dicor tape or Flexseal tape. Both will easily hold up without using additional hardware. If you want extra hold, you could always use adhesive caulking and or semi-permanent hot glue. Toodles.

@jrhairdesign

Жыл бұрын

Hi! Is there any chance to purchase the brackets from you? I don't have a 3d 🖨.

We had a red squirrel (family?) get into the underbelly of our old camper, there were so many pine cones in there, the underbelly was sagging. I cut multiple holes (access hatches similar to this) to remove them. To close the unit back up, I placed the lightest deck boards I could find inside, overlapping the seam and screwed up into them and then sealed it with rubber roof tape to keep moisture out.

ive taped the cutout in my trailer twice and it keeps falling apart..gonna try this

You can make the bracket iut of plexiglass. Drill straight holes for the outer part and tap the holes for the inner part

How'd you get the nut on the inside?

Good job. Maybe want to put some blue loctite on the bolts so they don’t come vibrate off while driving down the road.

How do you lock the nuts to the top of brackets

How did you determine where to cut to have access to your tank?

@steveduffey9397

Жыл бұрын

Would like to know this also…

Hey Shawn, Could you still make some of the brackets and what would the cost be?

Nice fix... however, when you put the bolts in on the door flap, how did you work the nut when sealing it up? Or did you tap your 3D printed brackets so the bolt just went on in? I'm a little lost at this step.

I Liked the bracket idea but I do not have a 3d printer could you send me some information to get the brackets.

Thank you for doing this video. Very smart fix!

how bout a zipper?

So is this considered a heated enclosed underbelly? Just curious as I'm new to the travel trailer world...

@CollaGoUnLTD

2 жыл бұрын

This is not a heated underbelly

Thank you for the video. I don’t have a way to do 3d printing. Would you be able to sell a few brackets to me?

Good job!

use the tape made for corroplast...never had it come off

@SmartMeterEducation

Ай бұрын

What tape is that?

HI! I hope you see this soon but I am in need of these brackets to repair my moms fifth wheel for her this week. Are you able to help? or guide me on where to find something like it?

@CollaGoUnLTD

2 жыл бұрын

Try this link www.thingiverse.com/thing:4867559

@milburnist

2 жыл бұрын

@@CollaGoUnLTD is there a way to purchase? I don’t have a 3D printer.

@CollaGoUnLTD

2 жыл бұрын

@@milburnist what’s your email?

How did you get the nuts to stay on the back of the brackets when you can't reach in there to tighten them?

@CollaGoUnLTD

2 жыл бұрын

I just put a little piece of tape over them to hold them in place and poked a hole through the tape on each nut so the bolt could still thread all the way through

@rickhuis3773

2 жыл бұрын

@@CollaGoUnLTD this was the part you left out but now I get it. Thnx

@jeffgeorge6195

3 ай бұрын

Interested in your brackets if you are still selling them

I was going to 3D print the brackets but it seems the link is no longer active. Do you have an updated one?

@CollaGoUnLTD

2 жыл бұрын

www.thingiverse.com/thing:4867559

@brandonbishop9684

2 жыл бұрын

@@CollaGoUnLTD weird. still seems to be a dead link for me....

@jerrodlessel

2 жыл бұрын

@@CollaGoUnLTD this is also a dead link, is there another place to find the file maybe? Thanks so much for your help with everything.

@CollaGoUnLTD

2 жыл бұрын

Try this link, I think it’s fixed now! www.thingiverse.com/thing:4867559

What tool you use to cut into underbelly?

Eternabond makes black tape. It will outlast the plastic.

Can I order 3 of those brackets from you?

Good job! Where did you buy the brackets? Thanks

@CollaGoUnLTD

2 жыл бұрын

I 3D printed them from this link www.thingiverse.com/thing:4867559

legit!