⭐️SHOP ALL OF OUR PRODUCTS⭐️ ✅ Why Wait Amazon Page ✅ www.amazon.com/shop/__whywait__ All of our favorite RV gear, categorized & located on our Amazon Storefront.

The jack stand / 2x4 tip is brilliant!

@WhyWait

6 ай бұрын

Thanks man. I can’t take credit for it, I saw somebody doing it but can’t remember who now 🤷🏻‍♂️ Appreciate you watching 👍🏼

Thank you for filming and sharing

@WhyWait

6 ай бұрын

Sure thing. Definitely one to bookmark the day you need to do this project. 👍🏼

Hey Chris...great video as usual! 😀 I need to do this AND replace the blank tank too...I overfilled it (don't ask) using the blank tank flush, and something gave way and leaked a fair amount of water...although definitely not all of it. Fortunately, the tank was virtually empty so the leakage was pretty clean! 👍 However, the Coroplast needed replacing anyway so this is a good reason to get it done! Great tips, gonna check out RecPro for the materials.

Brilliant! and you check for entry of critters. Well done

@WhyWait

3 ай бұрын

Yes sir. Thanks for watching 👍🏼

Thanks for making this video, great information.

@WhyWait

3 ай бұрын

You’re welcome Shawn. Hope it helps you out if your doing this project or ever need to get into the underbelly 👍🏼

Great video, thanks for this!

@WhyWait

2 ай бұрын

Glad you liked it! 👍🏼 Hope it helps when if you ever need to do this

Excellent video 👍👍

@WhyWait

6 ай бұрын

Thank you! Cheers! Appreciate you watching. 👍🏼

Hi Chris I am so happy I came a cross this video, My trailer has a crack in the black tank and taking the trailer to get repair is not and option since it is my home. I was told to replace the tank they need to know the model, or number in the tank, to order the tank, and apparently it can take two to 8 weeks! I can't go without my home for that long. So, I started making calls, and just the removal of the underbelly to check the number in the tank it is $150. I'm no afraid of power tools, so I decided I will removed the underbelly myself. and leave it down until the replacement arrives. The techs can so the rest. 🙂 it is also more likely It need a new underbelly. so Thank you.

@WhyWait

4 күн бұрын

Sure thing. Always good to see what’s going on under there anyways 👍🏼

Thank you, very informative. For me, very timely, I need to replace our underbelly.

@WhyWait

6 ай бұрын

Sure thing. It’s not the funnest job, takes about a whole day, take your time and just make sure it lines up on the frame going all the way back. Good luck. Thanks for watching 👍🏼

Thanks!

@WhyWait

Ай бұрын

Man thank you! Really appreciate that 👍🏼 I’ve only had a handful of super thanks and really do appreciate it so much!

Subbed. Your straight forward and relaxed approach is appreciated. Also an army vet. Cheers dude.

@WhyWait

4 ай бұрын

Appreciate that and thanks for your service. 👍🏼🫡 Safe travels out there.

SOOOO happy to have found your video. Our underbelly blew out at 70 MPH on the Interstate! Very dramatic, to say the least. I've ordered the material and am armed with your awesome hints for success. Thank you my new RV brother!

@WhyWait

2 ай бұрын

Good deal, really hope this helps you out. Not to difficult, just take your time and get it lined up correctly. Thanks for watching 👍🏼

Nicely done! We've largely rehabbed our RV but going into the belly is something I'm procrastinating doing as I don't know what sort of a hot mess it will be under there. At the same time, I love the "why wait" motto of just jump in and do it. Yes, the jack stand and the 2x4 is a brilliant idea - but ouch... rock.

@WhyWait

3 ай бұрын

Thanks! I was hesitant about opening it up as well. It’s like a wall in an old house, once it’s open you see all the issues. Oh and yeah, I was sore and had gravel imprints my body the next day lol

Chris we inherited a 2004 Holiday Rambler Alumascape 5th wheel from my folks. Awesome all metal rig that we are restoring cosmetically and mechanically. This vid was enormously helpful as our cable actuated gray tank valve is stuck in the open position so I need to access the belly to repair and rejuvenate the systems in that area. However, I did use eternabond to seal a failing seal job on a hole that was cut into the belly to access valves in the past. Eternabond works way better that Gorilla tape. Thanks for the tips and suggestions.

@WhyWait

6 күн бұрын

Good deal. 👍🏼 Glad the video helped you out. Thanks for watching and commenting

Thanks for this i have to replace both tanks and need to replace the under belly

@WhyWait

4 ай бұрын

Sure thing. Definitely makes doing it by yourself easier. Biggest takeaway is just make sure it’s lined up goes back evenly on both sides. 👍🏼 Appreciate you watching.

Great help did not know where to purchase the underbelly material

@WhyWait

6 ай бұрын

Good deal. Yeah RecPro has a lot of those strange RV only products you may need. Thanks for watching 👍🏼

From day 1 We put small holes in from back to front boy that was great.

@WhyWait

6 ай бұрын

Good idea. Keep an eye on any suspicious leaks that way👍🏼👍🏼

Good with the jack stands! Tho I have a motorhome and no coraplast it comes in handy for the knowledge. I had a couple beers and extra inspired!😂. I watch your videos all the time and appreciate. I know a lot but still learn all the time.

@WhyWait

6 ай бұрын

Hahaha 🍻 Appreciate you watching all the time! That’s me too, still learning something new all the time 👍🏼

Good video to show how easy it is to do. One suggestion I have for those that have heated underbellys is to run a strip of foam door insulation along the new screw line between the coroplast and frame. It will seal the gaps between screws to keep out moisture, bugs and such. I used 1” x 1/2” foam with the screws placed 12”s apart.

@WhyWait

6 ай бұрын

Good point and I really thought about doing that. I had some black double sided tape, not quite butyl tape, and was going to do the same. Appreciate you watching and commenting 👍🏼

Hi Chris, great tips and video. Have you considered a "plastic welding kit" to repair your crack in the grey tank? They're a lot cheaper and less work than you replacing your entire tank.

Nice, I put that in my saved list. HEHEHE About 95% I have to do stuff by myself also. GOOD JOB.

@WhyWait

6 ай бұрын

Hahaha not to bad of a job, took most of the day and next time I’ll lay on a blanket. I had gravel indents all over my body for two days 😂😂

Great video. It’s a mystery what’s up under there.

@WhyWait

6 ай бұрын

Hahaha ain’t that the truth! Appreciate you checking it out 👍🏼

Nice job!!!👍

@WhyWait

6 ай бұрын

Thanks George 👍🏼

@georgecole1311

6 ай бұрын

@@WhyWait what’s your opinion now on the gen-y hitch now after having it installed for a while?? Thanks Merry Christmas 🎄

@WhyWait

6 ай бұрын

@@georgecole1311 do you mean the Reese Goosebox? I don’t have the gen Y hitch.

@georgecole1311

6 ай бұрын

@@WhyWait I’m sorry I thought you put on Gen-y hitch.. My Bad

@WhyWait

6 ай бұрын

@@georgecole1311no worries…love my Reese Goosebox though! Have a few videos on it.

Man first of all i really appreciate this video! Found this looking for help. I have the situation you described. However, i have a 2010 keystone cougar x-lite. I have so many thing protruding past the underbelly like gas lines, waterline stems, braces, etc.. So, for example, its so difficult to remove mine i had to cut a square out to see what i could see. Soon I will be replacing my old coraplast with the recpro you show in video. I will have to wedge it over piping, thread it, and cut holes for the protruding assemblies. Yours seems so flush an clean compared to mine. I hope the recpro coraplast can bend and fold easy. Mine is gonna be a pain in the a$$ 😅

@WhyWait

2 ай бұрын

Yikes. Sounds like that will be a pain. I know my back section of corroplast would be challenging as well. Good luck, thanks for watching.

Thank you for the info. We had a problem last weekend and have all the sagging you mentioned. Wonder what I will find? 😇

@WhyWait

3 ай бұрын

Sure thing. I was afraid for years to open that underbelly because of what I might find and have to deal with. But it’s good to get under there and see what’s going on. Good luck!!

Great video! Thanks for sharing. What do you use to seal around protrusions such as plumbing? I have some very big gaps to fill and trying to find what type of foam is used from factory.

@WhyWait

Ай бұрын

Sure thing. I just use Great Stuff to seal up gaps on my RV. amzn.to/3wug4n0

Did you considered using rockwool instead of fiberglass insulation? We took a break from camping and are starting up again and I appreciate your videos for my future oh shucks repairs.

@WhyWait

5 ай бұрын

Appreciate you watching. I didn’t really do much research into it. Just bought what was probably cheaper. If rockwool is better R value it should be good.

Do you have a video/ suggestions on how you fixed the gray tank leak?

@WhyWait

2 ай бұрын

I’m just going to replace my grey tank. The crack being right in the lip where all the pressure is I can’t see being fixed with anything. Just too much weight pulling down on the crack. Haven’t replaced the tank yet but I will. I just don’t fill it up to the top nowadays.

Extremely helpful! New sub. Out of curiosity, do you think it would be necessary, or did you stumble upon any manufacturer recommendations to use some kind of sealant between the frame and underbelly material? That may be overkill, but mice are always a problem.

@WhyWait

2 ай бұрын

Thanks, appreciate that. Nope I didn’t use anything and there wasn’t anything on there prior from Grand Design either. You could always use some outdoor double sided tape or butyl tape I suppose but might be a nightmare next time you need to get in there. I feel if mice want in they will get in 🤷🏻‍♂️ Appreciate you watching.

where are you located? what state, city

What size self-tapping screws and washers?

@WhyWait

4 ай бұрын

I reused a lot of the same screws. Not sure the size and I’m not at the rv right now. But I’d do just like I did and remove a screw from the frame, take it to the hardware store and match it up. Here’s a link to the washers. Thanks for watching. www.amazon.com/dp/B01N9EPCPQ/ref=cm_sw_r_as_gl_api_gl_i_T2JXSEDVEWKF1W2A7NDH?linkCode=ml2&tag=whywait-20

Were you able to use the same screw holes or did you have to make new ones with the self tapping screws and how did that go?

@WhyWait

6 ай бұрын

I touch base on all of that in the video at the 8:00 minute mark 👍🏼👍🏼

What size screws did you use? I've had #8 self drilling screws hit the frame a couple times and they just don't want to drill into it.

@WhyWait

6 ай бұрын

Not to sure right now to be honest. I reused a lot of the same screws and I’m not by my RV for the next few weeks to tell. Most of mine had no problem going in…maybe that’s a good thing for you, means you have a nice high quality frame lol

I had water Waking into our underbelly from the bathroom grey tank. I thought if the tank overfilled while taking a shower, I would see it back in up in the shower, but the service folks said the drain pipe is not sealed to the pipe below, so and overfill will drain into the underbelly, seems crazy to me, but they said it protects flooding into the RV. So now I just leave the drain open till the last day of our visit and use it the flush the pipes

@WhyWait

6 ай бұрын

That’s crazy. Not suppose to be like that. All of our tanks once full just start filling up our sink or shower and that’s how we knew they were full and ready to empty.

@mse1333

6 ай бұрын

@@WhyWait I agree with you, after all, why in the world would you want leaking into the under belly. I bought the Salem Hemisphere travel trailer 6 yrs ago from Camping World. Their service dept sucks, so I took it to an independent RV service company with excellent ratings, and they told me my system is designed to overflow into the belly. Makes no sense, and frankly, don’t believe them. But that’s what happened. I had my kids and grandkids camping with my wife and me and the last day there were a few showers taken and I forgot to open the bathroom grey tank. Never backed up into the shower but overflowed into the belly.

@WhyWait

6 ай бұрын

@@mse1333 that’s wild. Never heard of that.

Hi Criss, did you ever repaint your frame ?

@WhyWait

6 ай бұрын

No I’ve never painted it. Really haven’t had any bad areas or rust that I’ve need to work on and then have a reason to paint it. 👍🏼

Unfortunately my underbelly is riveted on . When I had trouble with a broken gray tank handle ,off to the shop it went. Let them take the rivets out and replace them with screws. The last time I was there they told me about an underbelly cover that slides either under or over the next section. Have you ever heard of this?

@WhyWait

6 ай бұрын

Yes I actually have seen that in some new model RVs. Pretty cool looking and nice when you have an issue under there!

My Jayco is designed so you cannot unscrew fasteners I am still trying to figure out how to get at the leaks

@WhyWait

29 күн бұрын

Strange. I have no idea how that works or what that’s about.

Where do you get that underbelly plastic from?

@WhyWait

2 ай бұрын

We got the corroplast roll from Recpro. Here’s a link and code for 5% off 👍🏼 SAVE 5% on RecPro orders using our link below and enter this promo code: DKPKNUS www.recpro.com/?referral=DKPKNUS

I called the manufacturer and they told me shiny side down

My 4 d tube bars with plates that hold up my fresh tank 96 gallons , the front plates broke loose and the belly of tank was sagging horribly.. we were about to take off from IA to GA.. I seen 2 bars hanging down from the front .. crawled under seen what it was.. manufacture used self tap screws to hold flat plate brackets on that is welded to the tubes that hold up tank.. the flat plate has 4 holes and only the front holes of plate could be used. Using Back holes, screws would have went into tank .. over 800lbs of dead weight held up my self tap screws.. tons of weight pulling down , screws aren’t meant for that force.. so I drilled out and used grade A bolts and double nutted them. Couldn’t imagine driving down the road and losing your fresh water tank with 600/800 lbs of water in it.. what are these manufactures thinking..

@Ricky-eo5ym

6 ай бұрын

Smart unbelievable that the manufacturer would not do the same. Who made your trailer.

@HappyRamblingCamper

6 ай бұрын

@@Ricky-eo5ym Heartland .. we have been lucky for the most part, been full timing in it for over a year.. I am ocd over upkeep and maintenance.. but had been the only issue .. a big one, but I have seen so much worse..

@Ricky-eo5ym

6 ай бұрын

@@HappyRamblingCamper Thanks for the reply. Good to hear that you guys have had fairly good success. Enjoy.

@WhyWait

6 ай бұрын

Yeah pretty crazy. I like our style of tanks where the lip of the tank sits up on the edge of the frame itself. Plus we have a steel bar going across the middle vs those straps I’ve seen some companies use that always seem to fail. Appreciate you watching and commenting 👍🏼👍🏼

@ChristopherBurton-gp4ls

2 ай бұрын

​@@Ricky-eo5ym most campers are all made by the same shit box manufacturers under different names

👍🇺🇲

@WhyWait

6 ай бұрын

🫡🫡🫡