Thank you for watching my video! After you finish watching you should check this Yellowed Playstation PS1 here: 😎🥰 kzread.info/dash/bejne/Znx21JqHdZSdn8Y.html

@j-fourschutt3175

5 жыл бұрын

Love the videos and have feedback. I prefer hearing the tools, but they have to be balanced so it doesn't make you deaf when using headphones. There were 2 typos in the video, it should have said degreaser and Jade

@sethbracken

5 жыл бұрын

TysyTube Restoration if you put the wire wheel on a heavier table and bolt it down the noise will be much better. All the noise you’re getting is from the table too acting like a drum and the motor being able to move around.

@mac1980ification

5 жыл бұрын

I preffer tools sounds.

@TysyTube

5 жыл бұрын

i know, i need a heavyer bench

@jmr1969x

5 жыл бұрын

Love the videos hate the grinder sounds!

I discovered something a number of years ago, when I was researching vises in a new catalog from an industrial supplier. More expensive vises, both bench and milling type use a Torrington thrust bearing between then handle knob and the pressure point on the vise. What do I mean? At 12:30, when he replaces the Acme shaft into the vise, a Torrington would be placed on the shaft, before insertion. Then, when tightening the vise, you will never have to use a hammer on the handle to get it tight enough. You will also never have to use something to hammer it loose, and for all of us old timers with aching, painful wrists, that is a blessing. For you young guys, it might keep you from crying when your wrists hurt so bad, you want to scream. I spent almost ten bucks for all the Torrington bearing I needed to install them in every vise I own. Even the cheap little red vise which had permently became a doorstop, (we all have one, they're always such a good deal, 0.50 at a garage sale, you can't resist. Then you use it, and it gets repurposed. The Torrington upgrade even turned the doorstop back into a usable vise. The difference is astounding. I recommend everyone upgrade their vises. I guarantee you WILL feel good about the expense, and time.

many thanks from Poland for the second life of this vise.

@TysyTube

5 жыл бұрын

thank you so much 😊

@TheAthalyse

5 жыл бұрын

Yup, same here - thanks (plus greetings) from Poland 😉

@udokrause832

5 жыл бұрын

@@TheAthalyse.Der existiert in 200 Jahren noch.:-)

@manerox4986

5 жыл бұрын

Siemka

@manerox4986

5 жыл бұрын

Ty to jest polskie imadło

Birdsong every time. Support from Scotland.

personally I don't mind the sound of the grinder, just the volume of the sound (compared to the rest of the quiet). I just found a vice in the garage that needs a lot of love. Watching this as inspiration :)

Bird song, definitely. You can overlay the grinder at a much lower volume, just so it won't be that quiet. I love hearing the clickety-clack of the tools, it brings a new layer of reality to the work you're doing, but if the sound is too harsh or loud, it's annoying, and it detracts from the quality of the video. As for your camera, sounds like a white balancing issue. Try setting WB manually to fluorescent/LED or whatever type of light you have in your shop, and see if it happens again. If you shoot in fully automatic mode, take an hour or so and play with the settings to find a programmed mode (or even fully manual) that works for you.

@TysyTube

5 жыл бұрын

John JeiJei thank you so much for all your advice, you have right some time the tools don’t sound so good, i have edited this with headphone to see what is wrong, i have a ring light 2 umbrella hith fluorescent light and 2 panels led with color between 3200k and 5600k

@5thgearouttahere

5 жыл бұрын

@@TysyTube yes it is almost certainly WB. you can even try changing the settings while looking at a white sheet of paper (or something like) and then you will know if the colour temperature is correct. thanks for the videos!

I like the grinder sound personally. The birds are a nice touch tho. I find your restoration videos soothing and inspiring. Keep up the great work! I look forward to all your videos

What a letdown. I kept waiting for you to smash that bug with that vise. Ha ha. Ha By far the best restoration videos on the Internet, hands down!

Listening to the birds is much nicer.

I like the birds and I sincerely hope that you are using some noise protection so you don’t damage your hearing🤔. I also wanted to say thanks for being nice to the little 🐛

Very nice to see someone actually uses the right oil to loosen stuck parts, not like all the other idiots spraying WD-40 like crazy 😆 Good job man, it came out very nice. Btw i loved that part with the bug 😍

@TysyTube

5 жыл бұрын

thank you so much My Mechanics 🧰

@telescopereplicator

5 жыл бұрын

MM : ;-)

@hjdorn

5 жыл бұрын

Amen. Nothing will stink up your shop like a healthy spray of WD40. I'm using olive oil btw. Works like a charm and you can smear it on your skin all day without worries.

@hiquality_distraction4084

5 жыл бұрын

put a sheet of rubber/rubber hose etc. between your table and your grinder. it will help with vibration noise

@NcrebelRS

5 жыл бұрын

I know right, bunch of noobs... 🤣

I like the quick sound of the tools. And this green is great!!!!

The sound of the real work or process is way better than any substituted sound

If you ever notice your camera goes orange, hold a piece of white paper in front of it. It's a white balance issue since you most likely have Auto White Balance turned on, it's referencing something blue, probably your gloves, as white. So use a white sheet of paper to fix the orange color.

@TysyTube

5 жыл бұрын

thank you for your advice 😊👍

@kjamison5951

5 жыл бұрын

This is what I was thinking of as well. Also, light source needs to be as consistent as possible. Relying on daylight alone is not enough. A good source of 6500K lighting will keep things consistent when a cloud shaded sunlight or it darkens as the sun sets. Some lights have lower colour temperatures and can mess with the camera’s automatic settings. Incandescent bulbs and halogen bulbs have a lower temperature than LED bulbs and even LED bulbs differ in colour temperature between warm white and daylight white.

@SandrineCaya

4 жыл бұрын

I would add to not use automatic WB. Only use automatic to set the color when you put the white paper in front of you camera to set it and don't touch it after.

you and my mechanics are probably the best restorators on KZread.

@emilyfaircloth98

5 жыл бұрын

two fav restorers on youtube

@Rebellious_Melody

4 жыл бұрын

Odd Tinkering is really good as well.

@bobbell5928

4 жыл бұрын

my mechanics would have had to make something on the lathe

Glad to see you finally sorted out your bench grinder!

Natural sounds are always best in restoration videos. I don’t like it when people overlay the video with music. Great video.

I like grinder sound. because somehow i feel comfortable with this sound.

Nice work man 👍 I think the orange color of the video camera is because of automatic white balance. You can either use some of the other white balance modes or do color correction while editing the video.

@TysyTube

5 жыл бұрын

thank you so much for your advice

half joy of restorations is the sound

Yes. I like the birds in the background

1:29 Pyrrhocoris apterus aka Common Fire Bug 7:32 White balance issue

@alden1132

5 жыл бұрын

FirstDagger I was gonna say maybe a Milkweed bug, but I think you're correct.

@yadaroni

5 жыл бұрын

Correct. It is a Common Fire Bug

@user-em3tm7rk6e

5 жыл бұрын

In Ex Soviet Union Area his names is a Soldier ("Солдатик").

@yt75009

5 жыл бұрын

@@user-em3tm7rk6e Funny, in French it is called a "gendarme" (a bit like a policeman, but also part of the army), also sometimes "cherche midi"(looking for the sun at noon)

@silentgolden8507

5 жыл бұрын

Thank you was looking for the local entomologist :)

maybe do bird sound with grinder WAY WAY in the background

i dont know bugs, i dont know cameras...i do know i like that green you used. great job on restoration!

Found two old vices small & large at a flea market in the same shape, bought both for $10.00 (US). Had no clue how to clean them up. Now I know...thanks for sharing!

Porządne polskie imadła!

@eraserstp

5 жыл бұрын

Поляки всегда делали хорошие инструменты.

@MyPaolo777

5 жыл бұрын

Bez młota to kurwa nie robota, po tylu latach działa bez problemu

@holocaust_2.0

5 жыл бұрын

@@eraserstp I'm not sure if that's an insult or a compliment.

@eraserstp

5 жыл бұрын

@@holocaust_2.0 It was a compliment, pls do not be so negative, lol

Love the sound of the birds

C'est un gendarme le "little bug" ,beau travail !

is anyone else scrolling through the comments only to find out what the bug is called or is it just me?🤣🤣🤣🤣🤣

@AmericanPride1234

4 жыл бұрын

Daniel Greenwood huh a lady bug I am guessing. 8-21-19

@InstrucTube

4 жыл бұрын

@@AmericanPride1234 Nah, those are known in America as Box Elder bugs, but in Europe they're apparently called fire bugs, or something similar depending on the language. Ladybugs are smaller, rounder, and have more spots.

@aXenonGameplays

4 жыл бұрын

I can only tell you the name of that bug in Polish, but there is a fun fact about them - during the mating process, male and female are stuck together with their butts, so one of them is always crawling backwards :) And they spray very stinky yellow pus when endangered.

@gasbri6995

4 жыл бұрын

We call it a "Gendarme" (kind of policeman) in France XD

@FeyMeridian

4 жыл бұрын

I think the latin is Lygaeus equestris also called the black-and-red-bug

nice job but next use drill bit to take off rivets it s funny because i was restored few bench vise and c clamp with same jade green

I live maybe 800 meters away from Bison factory that makes these. I own a 100 model Blue. Thanks for that video.

HI ! I'm French and we call this little bug "Un gendarme", "Pyrrhocore, Pyrrhocoris apterus,". Bravo for your work.

Great resto amazing what you can do with just hand tools! Did the lady bug make it? Bird song better than machine noise. Cant wait for the next one. Thank you

@TysyTube

5 жыл бұрын

thank you so much, i let it outside , new video next week, check my instagram if you want to be updated 🤣😊

Gratulacje! Dobra robota! Pozdrowienia z Polski!!!

@Seba-gn7yn

5 жыл бұрын

Dzięki

Good to see you brush the paint on. Much better than the spray. Nice video.

Thanks for the video, your passion for this shines through! I love that your grinder has a Peugeot sticker on it!

from restoration to saving a bug life

@TysyTube

5 жыл бұрын

exactly 😊😍

@plumpbird2005

5 жыл бұрын

Can we call the bug "steve, or larry"?

For some reason, "Poland Vice" never went over as well as "Miami Vice".

@92xl

5 жыл бұрын

Crockettski and Tubbski made a huge illegal kielbasa bust and nobody cared.

I actually really appreciated that bug, thank you

Great restoration. And cool to see one from Poland. My wife is Polish so it uniquely appealed to me. Thanks again!

Made in Poland ❤️

@TysyTube

5 жыл бұрын

Yes , heavy duty Vise , is so beautiful

In the States we call them ‘Box Elder’ bugs. I don’t what they’re called in Europe.

@michamisza5166

2 жыл бұрын

In Poland its a blacksmith wingless or just tram commonly 😃

I love when he applies paint stripper 💯💯💯

The bird song is very relaxing and a great addition - but maybe keeping the grinder audio in, just at a very very low volume, would be cool too?

Dobra robota. :)

Depuis que je suis petit j'ai toujours entendu le nom de "Gendarmes" pour ce genre d'insectes...

@TysyTube

5 жыл бұрын

🤣🤣🤣

@Mcfly_43

5 жыл бұрын

Oui gendarme ou pyrrhocore

@laurentpavot9374

5 жыл бұрын

Pareil ! ^^

@JonasTraber

5 жыл бұрын

Peu importe le nom... Sortez le lance-flammes ! :P :P :P

@yt75009

5 жыл бұрын

Oui moi aussi, mais appermment aussi appelé "Suisse", "Soldat" ou "cherche midi" dans certaines régions : www.insectes-net.fr/gendarme/gendarme2.htm

Beautiful restoration. Never heard the bird but I agree the grinder needs a silencer.

LOVE the grinder sound

Во время съемок этого видео не один клоп-солдатик не пострадал))

Wish the plaque was remounted nicer

I like the birds sound with the tools

Great job! Love the birdsong.

Is it only me, or someone else also expected this bug getting smashed with hammer or any other heavy tool here ? 1:37

The bug is an european firebug, Pyrrhocoris apterus

@Woffleg1

4 жыл бұрын

In Ukraine between the people's we call them soldiers (like us tiny solder, I don't know how it was in English)

@tobycarrie5374

4 жыл бұрын

Boxelder bug

Bison Brand is very good quality! Thanks for sharing!

I really like that you put a colour similar to the original

Poland vice is extra strong vice....

In Germany we call these bugs "Feuerwanzen"

real nice redo, beautiful color paint. ✌️️😎👍

That Hammerite paint is amazing...and I bet you wished the original manufacturers had put the label on straight!

Waited the whole video to hear the Mazurek Dąbrowskiego. May be next time.

1:29 I know This bug is Pyrrhocoris apterus

You ought to be proud of such an excellent job.

Bonsoir , c'est tres beaux travail !! C'est très brille , jaime beaucoup 👍🏻👍🏻👍🏻♥️😃😃😘😘😍😍

The camera problem is White Balance settings, try to use other setting than AWB (Auto White Balance) one

@TysyTube

5 жыл бұрын

🤔maybe you have right i will try to change that mode

I think the name of the bug is Joe.

@zunleqitprime4748

4 жыл бұрын

tierfuehrer2 whats a bug

@bobbell5928

4 жыл бұрын

A grasshopper walks into a bar. The bartender says "we have a drink named after you" The grasshopper replies "you have a drink named Steve?"

I like the sound of the birds

THATS INCREDIBLE !!! CONGRATULATIONS !!!

Oh yeah his name is Terry.

Have you tried calling the bug Semore? Or tried calling him by another name?

Hello ! Got the same at home, was at my grand father ! Will restor it too ! Thanks for yout videos ! Com from France

Hello!! I'm from Brazil!! 🇧🇷 And I love your restorations 😉 I really prefer the birds songs , 🐦🦜 Your videos are wonderfull .. good job 😉🥰

Чистить тиски тряпочкой это жесть .

Un gendarme? 🤔

@koreelarry4127

5 жыл бұрын

Effectivement c’est bien un gendarme , bravo à toi . Par contre en polonais ?

@TysyTube

5 жыл бұрын

oui c’est fabriqué en Polinie

@commissairevalentin7120

5 жыл бұрын

żandarm

@koreelarry4127

5 жыл бұрын

commissaire Valentin , commissaire de police ? Ou gendarme ?

@commissairevalentin7120

5 жыл бұрын

ahhh ahhhh trop fort !

Loveeeeeeeee the sound and your work. Your videos help me sleep at night

Grinder sound,definitely! If I want birdsong, I’ll open a window!!! Top job!

bird song

@TysyTube

5 жыл бұрын

do you like? the birds song?😊

grinder sound is horrible , kurwa :)

@Seba-gn7yn

5 жыл бұрын

Kurwa siema

@tomeksz2796

5 жыл бұрын

Hey my polish friend. I luv pierogi

Great restoration, no waffle, just plain old hard work and attention to detail. Thank you

An excellent restoration, good work.

Где реставрация ? Губки в отличном состоянии .эти тиски практически не работали.

@sashatsvira7438

5 жыл бұрын

Ну губки поменял бы на нем и вся реставрация, ты придираешься:)

Beautiful restoration, bravo.

I like the sound of the grinder

nice paint, i love that particular color. real nice resto too.

YOUR VIDEO HERE JUST RAN ACROSS MY KZread TIMELINE ...... WELL DONE ON THE RESTORATION AND VERY KOOL OF YOU TO STAY WITH or CLOSE TO THE (ORIGINAL COLOR) WITH THAT [ JAD GREEN ] 👍🏼 ..... ( KNUCKLE👊🏽BUMP ) T. T. R.........

les chants d'oiseaux sont une idée de génie, regarder tes vidéos as un effet calmant, merci pour ton sérieux ! T'es comme l’artisan qui ce dévoue dans son domaine, ont sent la passion est c'est agréablement contagieux. sur un ton moins chiant, Thx dude I love your work keep it up, may you one day start restoring uniquely purposed items, bringing craftmanship and discovery to the table.

@TysyTube

5 жыл бұрын

Merci beaucoup mon amie

I have come to love Hammerite paint!

Nice paint and matching grease

Love the color you chose! It's so pretty!

very good Polish equipment

Wonderfully satisfying to see it sliding in so smoothly at the end! I think the sound of the grinder is just fine but keep it quieter... This all takes me back to watching my grandad fixing things on the farm... Thank you!

I love watching this dudes videos

It was a pleasure to see your restore an apparently useless vise that someone else might have thrown away. What a splendid job you have done.

I remember such vices from my school workshop in 80s. They are still produced though.

What ever makes you happy as you work I love birds and some machinery noises just like your videos! Great job👍🏼🌭🍻🍻🍻🍻🍻it the 4th of July today👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼🎇🎆

I do like the sound of birds and the sound of the grinder Sometimes a little sound would make this awesome experience even greater

Very pretty! Like others have said, that looks better than it probably did when it was brand-new.

I like the sounds of the tools

Nice restoration. The bug was cute

Nice work. I like that style of bench vise.