This car two years later (3 winter) - kzread.info/dash/bejne/mnaNz6afYLbVqbg.html * Thanks for your comments!*

@habilqqasimov9944

Жыл бұрын

Ela

@maggno737

Жыл бұрын

It could have given a better finish to the sole despite being internal, plus potting filled all the flaws, Bill Metal Work is a channel where the tinsmith does this, impeccable finish.

@user-mj6fd8xk6u

Ай бұрын

طریقه ساختن جاساز حرفه ای کوچک در پراید

With a stick welder? Respect!!

@mitsos306ify

Жыл бұрын

Exactly what I was thinking!

@dougbaker9473

Жыл бұрын

Just remember that before mig and tig they only had stick or oxy acetylene to repair cars back in the day .

@savage22bolt32

Жыл бұрын

I'd love to know the amp setting and stick diameter & number.

@michaelb7071

Жыл бұрын

@@dougbaker9473 True. Back in the day stick welding wasn't that big of an issue as the sheetmetal was two times as thick as it is today.

@obkf-too

Жыл бұрын

​@@savage22bolt32that looks like 6013 1.6mm from 20 to 50 amps (I would use around 30 there for this type of metal)

Respect from Ireland. Can you imagine how quickly and easily he could have do the job with a MIG welder and sheet metal fab machinery. Still proves that he has more skill with basic tools that most fabricators I know. He is a legend.

@lebecky_restoration

4 ай бұрын

Thank you friend! You can watch the video of what happened after 2 years😀Everything is fine - kzread.info/dash/bejne/mnaNz6afYLbVqbg.html

That doesn't looks easy. Respect to this man. 🤜🏻🤛🏻

Props to you man. A stick welder to do this work. The force is strong in this one.

@lebecky_restoration

Жыл бұрын

Thank you!😉🙏

@mikedelta1679

4 ай бұрын

INVERTER stick welder.

I know several professional body shops who would tack on the oversill then spray Schutz to hide their work. Good for you, and with stick welding on body panels. Respect from an old man.

@lebecky_restoration

Жыл бұрын

👍👍👍

Unless you know what you doing, you can't do this. This is not easy as it looks. Beautiful.

@htimsid

7 ай бұрын

To me it does not look easy. But it is presented clearly and systematically and so provided the job is approached with the correct preparation and tools and working environment it could be done by someone with affinity for mechanical / construction / DIY. But I have done many jobs just like this and it is indeed a LOT of work. What is always frightening is how much worse the (rust) damage usually is behind the visible section!

Applied finish colour and clear with a roller! I'm mind blown, great work!

Nice to see what can be achieved with an old school stick welder, nice work!😊

@lebecky_restoration

10 ай бұрын

Thanks😉🙏👍

I did a lot of repairs on my old cars years ago using a 90 amp stick welder running 1.6 & sometimes 2 mm rods. It can be done at low amps if you tack & don’t try to get “runs” having said that I progressed to a mig later- much easier. Getting the right shape on the patch panels was the key as was good access.

@Bakanelli

8 ай бұрын

Next step, TIG 😉

Уровень работ проделан коллосальный! Автор не упукает ни одной детали! Приятно посмотреть. Единственное, есть смысл инвестировать в нормальный сварочный аппарат, полуавтомат хотябы. Всегда думал, что электродная сварка для таких работ не подходит.

@lebecky_restoration

5 ай бұрын

Спс😉

@Vadik11111

Ай бұрын

конечно не подходит, это он хернёй маялся, зачем-то...

He does an excellent job i can trust him to do my car.

Man, no matter how many people say it's impossible or you'll ruin the metal. The skill decides

По газетам понял, что ты из Беларуси)) я прожил там 12 лет, сейчас живу в Казахстане. Большое уважение тебе за такую работу! Подписываюсь на твой канал ))

@lebecky_restoration

5 ай бұрын

😄спс😉👍

Really, you have worked hard and persevered. It is a wonderful and elaborate work. You are a talented artist

@lebecky_restoration

Жыл бұрын

🙏🙏🙏

Красавчик, я год назад дуговой сваркой в машине латку делал, ещё то удовольствие, сейчас с полуавтоматом за дуговую даже браться не хочу.

many respect for it very nice job ,you are e very good welder ,i am in car repair for 30 years its not easy to do tis and also thzan on e french car very good job !!!!!

Судя по газетам, вы понимаете о чем я пишу) Если это ваш первый кузовной ремонт, то это неплохо.

@lebecky_restoration

6 ай бұрын

😉

Хорошая работа! Сделано из толстого металла.

You just gave more motivation to keep restoring my car with my flux core welder. Beautiful work mate

@88SCHNEIDER

8 ай бұрын

Flux is crap, please buy mig welder and have nice life without rampage on you project

@lebecky_restoration

8 ай бұрын

Thank you! It's been 2 years since the renovation. This place is ok. No rust!😉

@ratgreen

6 ай бұрын

If you can afford to, get a gas mig. Flux core leaves acidic residue from the flux on the backs of welds where you cant get to them to clean them etc and makes them rust out faster, as well as being very messy and splatter going everywhere. I nearly did my repairs (check my yt) with flux but I'm so glad I didnt.

I truly had no idea you could weld thin sheet metal with a stick welder... Excellent detailed work!!!

@lebecky_restoration

8 ай бұрын

Thank you! It's been 2 years since the renovation. This place is ok. No rust!😉

@johneric3886

8 ай бұрын

@@lebecky_restoration Good to hear thanks for sharing.

Ich bin begeistert, dass es noch solche Künstler gibt die das können....dazu gehören viele Detailkenntnisse auch zur Statik eines Fahrzeugs. Die meisten "Vertragswerkstätten" beherrschen so etwas überhaupt nicht mehr oder es ist eben bei den aktuellen Stundensätzen nicht bezahlbar. Leider gibt es für viele Fabrikate kaum Reparaturbleche und alles muss angefertigt werden. Hätte ich diesen Handwerker zur Verfügung, könnte ich meine beiden alten Lancia Y10 retten....😢

@svendittmann3105

5 ай бұрын

ich muß auch sagen, die ersten 3 Minuten, ich hätte die Kiste angebrannt! Nie gedacht, dass sowas möglich ist!

You nailed it. The electrode could be a 1,6mm, but it works also 2mm with a bit less amps. If you're planning more of those repairs, I suggest you invest in a mig gas shielded machine, not a big one, as you usually use 0.6 to 0.8mm wire. It gives you the cleanest weld possible and you can control it precisely. Other than that, who never did some DIY crafting!? =) Cheers.

@lebecky_restoration

2 жыл бұрын

Thanks for your advice! Of course, I want to buy a mig gas shielded machine, because my mma machine is not designed for such work) It was quite difficult to do this restoration))

@darkfactory8082

2 жыл бұрын

@@lebecky_restoration No problem, you're welcome. I checked a bit and you can get a decent 150 amps mig for 250E, which is a combination of MMA/Mig, and a brand new one. Also a used is a good compromise. Anyway don't aim for the absolute cheapest machines, as those usually lack real power. I had an opportunity to test out a small, cheap 180 amps MMA machine (some "pocket" version) which was 130 or 140E, I don't remember exactly, although it was claimed 180 amps it was struggling with a 2,5mm electrode. I have a pro 200/160 ac/dc tig/MMA and it goes ok with a 4mm electrode. It also depends on the electrode. For ease of use and start it's better to use some rutile electrodes, otherwise for stronger, better quality and cleaner joints it's better basic, but also depends. If you start with a hobby rutile you're golden! =) Cheers.

@lebecky_restoration

2 жыл бұрын

Thank you. You are right! It's time to think about buying a Mig machine)))

@MsFantaMass

Жыл бұрын

@@lebecky_restoration эх а ведь заморские думают что мы такие же богатые как и они )

@TheMentalblockrock

Жыл бұрын

@@lebecky_restoration You've probably earnt enough Yew Chube money from this video to buy a Mig welder!

Nice video. Back in the day people used to weld their cars with MMA all the time. Of course MIG welding took over as it is much easier. But it is possible to weld panels as you have here. For structural strength you really need a continuous seam which is very difficult to do without blowing holes. The smallest electrodes and a lot of patience will help! Ultimately for thin body panels it just makes a lot more sense to use a MIG welder. But MMA is a great skill to have and for heavier gauge parts like chassis cross members it will work fine. I haven't done any welding in a few years, but I really must brush up on my skills. It's great therapy working on a car if you have the time!

@dont-want-no-wrench

Жыл бұрын

yes, everyone should be able to get usable results (though maybe not on sheet metal, that takes some extra skill) with an AC stick welder.

@malachy1847

Жыл бұрын

@@dont-want-no-wrench If If you haven't that skill, Plug welding may be the route to go down, as for an AC plant if you can push out the boat a plant with a Rectifier gives a more stable arc but it all depends on your funds...

@lebecky_restoration

Жыл бұрын

Hi! I completely agree with you! MIG welding is much easier than MMA. I don't want to do this kind of work anymore with the MMA welding😉

Fantastic work, as someone who has just bought a cheap stick welder for a little patch, you've shown what can be done.

@lebecky_restoration

15 күн бұрын

🙏Thank you😉

Той самий момент, коли руки ростуть не із сраки! Супер!

@lebecky_restoration

Жыл бұрын

👍👍👍🙏

I know nothing about welding and bodywork but that was really cool. Lot of work. Major skill.

Fantastic work! You are such a hard worker and a smart one too

@lebecky_restoration

8 ай бұрын

😉👍

My oh my was I confused with all of those little metal parts he welded back, thought where is this all going to end, but it all came out nice. Good job.

I live in Thailand and everything is stickwelded here. Can't use protective gas outside or where it's any wind. I've seen people stickwelded 0.5 mm sheet metal. With extreme caution of course.

@lebecky_restoration

Жыл бұрын

😉👍👍🙏

That's some mad skills with a stick welder ! Great content Thank You for sharing . 🇺🇲🇵🇷🦊👍

@lebecky_restoration

Жыл бұрын

Thank you my friend for your feedback. I'm very pleased! p.s. I am not a professional welder. I just learned in this video))

Considering you didn't have a Mig Mag welder available, very good job!😊

@lebecky_restoration

5 ай бұрын

Thank's😉👍

Top Arbeit ,und alles mit Elektrode geschweißt. Ich ziehe meinen Hut . Chapeau

@lebecky_restoration

2 жыл бұрын

Thanks for your feedback)

Very good video that gave me a lot of inspiration to this kind of repair on my own car , Thank you 👍👍👍👍👍

Really impressive skills you have.

you sir have bigger nutz than me for tackling this job with what you have, props to you!

@lebecky_restoration

22 күн бұрын

HaHa! Tank you! «Just Do It»😉😂

Good to watch and a really great finish. Well done.

Отличная работа, обожаю такие видео👍

I use a stick welder from time to time,but it's the whole job I find beautiful workmanship that's all

Электродами варить машину))

Increible!

You caught it right before it got into the cabin. Great work dude

@lebecky_restoration

Жыл бұрын

😉😉😉

First class job alot of time and effort into that sill

Jetzt besser als vom Werk aus ! Mit guter Hohlraum Konservierung hält dieses Fahrzeug noch ewig ! Top gute Arbeit mein höchsten Respekt 👍👍👌👌👌

Nice, thank you... I always wanted to see carbody repair done with arc welder, Super job ! Recommended to watch and learn from 👍💪🎀🙂

@lebecky_restoration

Жыл бұрын

Thank's!))

I have only ever used an arc welder. I don’t anymore as I’m to old to bother I used to use it for everything. Well done.

Excelente trabajo. Bendiciones. Gracias por ésos detalles en arreglo de vehículos. Gracias al canal...!

excellent job attention to detail better than alot of garages would do it

@lebecky_restoration

Жыл бұрын

Thank's!

Mad skills, mad skills!! worth every bit of $2000 for that!😎

Welldone presentation, you obviously had a good teacher Mr Lebecky, a good turn around that should reward you. Greetings from New Zealand 🇳🇿 Keep the next one coming ! 😁👍👏👌

@lebecky_restoration

2 жыл бұрын

Thanks for the feedback! I'm very pleased. I learn all the skills myself and thanks to the Internet) I do not have all the equipment and skills to do the job efficiently. But I will try to develop)

Wish I had the skills. Absolutely mesmerizing Great job.

@lebecky_restoration

2 жыл бұрын

Thanks! Your feedback is very important to me!

Jeez man! Most people haven't confidence to do a fraction of metal work you displayed in this vid. I'm an amateur myself (have fixed all rusty parts in my tree cars) but this is way more professional than what I ever done. Greets from Swe 🇸🇪 🌤🌲

@lebecky_restoration

Жыл бұрын

Hello, my friend! Thank you for your feedback! I'm not a professional either...)) I did this job for the first time and did not have the right tools! But I really wanted to do this job!)) Thank's for watching

@Vivungisport

Жыл бұрын

@@lebecky_restoration You are a natural talent. With better equipment you could go far in this field of restoration.

@lebecky_restoration

Жыл бұрын

Thank you! I am very pleased to hear it. I hope that I will please you with more interesting restorations...)) Now I can't make videos due to some life problems((

@Vivungisport

Жыл бұрын

@@lebecky_restoration Take all the time you need my friend. Health and relationship's are more important than subscribers. Be good 🌤🌾 /Tim

@lebecky_restoration

Жыл бұрын

You're right, Tim! Thank you.

Awesome job !! I tried fixing some rust spot in a bmw e30 with stick welder but i couldnt make good welds and also took so much time , i managed to fix one spot with stick welder and it turned out good , but the rest of the rust stops i fix them with mig welder . You have all my respect for fixing it with stick welder and your weld are suprisingly good, well done !!!

@lebecky_restoration

Жыл бұрын

Thank you! You are right! It wasn't easy to do...

Brilliant job

That was a tedious job with excellent result. Salute 🫡

Marvelous you did car body work with stick welding! Really great 👍

@lebecky_restoration

8 ай бұрын

Thank you! It's been 2 years since the renovation. This place is ok. No rust!😉

good job! it was a pleasure watch you work. thank you for sharing

Didn’t know you could buy a part like that, cool. Nice job.

@lebecky_restoration

Жыл бұрын

😉👍

What was the stuff you brushed on there on the rust😊

Amazing job with limited equipment!

@lebecky_restoration

Жыл бұрын

Thank's!)

Amazing work, very professional, we enjoyed watching your beautiful video thank you so much 👌

@lebecky_restoration

Жыл бұрын

Thank you! 😉👍🙏

You've done REALLY well there. Quite impressed by the results. :)

@lebecky_restoration

Жыл бұрын

Thank you!😉🙏

nice work!

@lebecky_restoration

4 ай бұрын

👍😉

Fantastic job!

As a 40 yr vet in the field a job well done.

What an awesome job,☝🏽👆👍👏🏿👏🏿👏🏿

@lebecky_restoration

2 жыл бұрын

Thanks!)

Very good result especially when you concider the tools used😀

Nice work. Welding thin metal with a stick welder is more than a challenge.

@lebecky_restoration

Жыл бұрын

You are really right😉

Amazing full restoration body

@lebecky_restoration

2 жыл бұрын

Thank you!)

Real artist 👏👍

your happy with the results !!! lol that was amazing thanks for sharing young man .

@lebecky_restoration

Жыл бұрын

Thanks for your feedback!))

Un excelente trabajo de chapa y un desafortunado trabajo de pintura.

@lebecky_restoration

4 күн бұрын

¡Gracias! Si, si... Así es😀😉👍

Superb job, well done.

@lebecky_restoration

Жыл бұрын

👍👍👍

I imagine my Spitfire’s sills look something like this behind the paint but I’ve not yet been brave ennough to face the pain - good effort 👏

Some thick material!!! Sheesh

You are wonderful creative worker... real professional.. peice after peice presiouly

Beautiful work a brother

@lebecky_restoration

2 жыл бұрын

Thanks bro!)

Nice work

You should be super proud of this!

Never seen this before. Pretty cool.

Nice work!

That is pro work!!! Oh, I've done a little of this with a small cheap stick welder and the real small rods that were once available at wall mart,..I thing 6032 or some such. Did the whole plug welding thing alot of places, turned down at much as I could. Was only inserting....was blessed later on to have a mig welder,...but I read somewhere a stick wellder could be turned into a scratch arc tig welder,...maybe that would be good for certain problems.

@lebecky_restoration

6 ай бұрын

👍Mig welder is better😉

Greatest one I’ve seen here in YT! Excellent work, man!

Nice work👍👍👍

Salute! Hell of works there sir

@lebecky_restoration

Жыл бұрын

Hello! Yes, you are right)))

Bravo, excellent travail. Vous êtes un professionnel.

@lebecky_restoration

2 жыл бұрын

Merci. En fait, j'apprends encore)

Welding lego masterpiece!

You can do better bodywork with stick than I can with mig...you got magic hands man!

@lebecky_restoration

Жыл бұрын

Thank you Peter!😉🙏👍

Damn that cancer ran DEEP. Was not expecting that.

Wow it's a great work with stick welding 👌👌 From India

@lebecky_restoration

Жыл бұрын

😉🙏

Excelente profissional 👏👏👏👏👏

Не смотря на упоротость всего происходящего...Вообще-то,ты молодец конечный результат норм. ps.30 лет кузовщик,видел в разы хуже работы.

@Big_Daddy_93rus

Жыл бұрын

Сварка электродами это жестко

@user-fj5cm4ho1n

Жыл бұрын

Технология 50летней давности, всё сгниет за год,два.

Nice job. Solid now!

@lebecky_restoration

Жыл бұрын

Thank's!😉

Great job my friend 👍💪🏻

@lebecky_restoration

Жыл бұрын

Thank's😀👍

Wow lots of work

looks perfect for me, GJ man ❤

@lebecky_restoration

8 ай бұрын

Thank you! It's been 2 years since the renovation. This place is ok. No rust!😉

Чувак ты сила, супер

Buen trabajo!! Me suscribo

@lebecky_restoration

Жыл бұрын

Thank you!😉🙏

Nice job. I like it: no words.

Great thorough job bro..

@lebecky_restoration

2 жыл бұрын

Thanks bro)