That will last long enough for you to rip someone off

@alfonsomontes8829

Жыл бұрын

You got that right😂

@paulcondie2520

Жыл бұрын

Facts

@CampAndDestroy

Жыл бұрын

This is definitely not the right way to do it but sometimes on these old junk vehicles there’s no point of doing it the right way

@flandersnew

Жыл бұрын

Claro amigo, el fin jistifica los medios, bien echo

@sflotr

Жыл бұрын

This is all about the ripoff. People like this make me nauseous.

this repair should last at least a week. This is how not to repair a rusty piece of metal.

@dunk5647

Жыл бұрын

Was getting it ready to put the for sale sign on it

@stantutak5579

Жыл бұрын

U have been generous with your timeframe

@DonaldAJr

Жыл бұрын

It'll last long enough to hit a chuck hole or 2

@04swiftstang

11 ай бұрын

Its perfect for a flipper though..cruel world..if you dont like it...only buy new.

@amj76425

11 ай бұрын

1Corinthians15:1-4=Moreover, brethren, I declare unto you the GOSPEL which I preached unto you, which also ye have received, and wherein ye stand; By which also ye are SAVED, if ye keep in memory what I preached unto you, unless ye have believed in vain. For I delivered unto you first of all that which I also received, HOW THAT CHRIST DIED FOR OUR SINS ACCORDING TO THE SCRIPTURES; AND THAT HE WAS BURIED, AND THAT HE ROSE AGAIN THE THIRD DAY ACCORDING TO THE SCRIPTURES. Ephesian 1:13=In whom ye also TRUSTED, after that ye heard the word of truth, the GOSPEL of your SALVATION: in whom also after that ye BELIEVED, ye were SEALED with that holy Spirit of promise. Ephesian 2:8-9=For by GRACE are ye SAVED through FAITH; and that not of yourselves: it is the gift of God: Not of WORKS, lest any man should boast. Romans 3:23-26=For all have sinned, and come short of the glory of God; Being JUSTIFIED FREELY by his GRACE through the REDEMPTION that is in Christ Jesus: Whom God hath set forth to be a PROPITIATION through FAITH in his BLOOD, to declare his righteousness for the remission of sins that are past, through the forbearance of God; To declare, I say, at this time his righteousness: that he might be just, and the justifier of him which BELIEVETH in Jesus. Without blood there is no life and without Jesus BLOOD no eternal life. kzread.info/dash/bejne/npaWltqwic2Xaco.html Look up Robert Breaker on youtube.🎉

Should be titled temporary rust cover up. Always take a semi weak magnet with you when looking at older rust prone cars.

This is exactly why you take magnets with you when you look at a car?

@RexFixx

2 ай бұрын

More likely car putty where were holes or yeah

@OlizerVanAntoninus

2 ай бұрын

Yes, but he left enough corroded metal to attract it

@402car_kid4

2 ай бұрын

Sometimes the magnets don’t work with thin bondo though.

@farmsgrace341

2 ай бұрын

That's a thin layer of filler. Even a weak magnet would stick.

@mosthated863

Ай бұрын

Why is your comment a question?

Wrong wrong wrong. You've simply ground off the top layer of corrosion and filled over it. The rust has penetrated the metal so either cut it out and wels in new metal or use a phosphoric acid based rust converter first.

@marekluszczynski2764

Жыл бұрын

Za rok wymiana progu

@miechalmiechal2974

Жыл бұрын

​@@marekluszczynski2764to już pewnie nowy właściciel będzie musiał robic

@piotrszarkowski9971

Жыл бұрын

Kto daje czerwony podkład pod srebrny lakier??? Pomijam że taka naprawa wystarcza na pół roku

@sypher0101

Жыл бұрын

Can you use Hydrochloric acid to neutralize the rust?

@Nick-qw9ge

Жыл бұрын

im getting rust in the same area shown in this clip althought mine isnt as bad if i were to sand the rust then use the phosphoric acid like you suggested would that work long term? im trying to avoid spending thosand of dollars

this is not a repair..it is a cover-up. there should be a law against it.

@user-td8jc5fi5s

11 ай бұрын

Какие все умные. А если он это делает для себя? Тоже пож закон попадает?

@panagiotisathanasiou7918

11 ай бұрын

You are right.

@vahramkhachatryan4811

10 ай бұрын

that a b.shit.

@5.0sRslow

6 ай бұрын

Why a law it’s incredibly easy to locate body filler on a vehicle if this trick gets you it’s on you if you don’t like it buy new only or pick up some knowledge🤷🏻‍♂️

@HollywoodHornet

5 ай бұрын

There should be a law against fixing your own rust damage? Govern me harder, daddy!

Временный эфект , эту корозию не остановить.

How not to do it.

That’s a dealership hack. That’s why you need to look underneath the vehicle to inspect for rust.

Ready for quick resale with 30/30 warranty. 30ft or 30seconds whichever comes first.

@rackem6991

Жыл бұрын

Corrosion from within

@ripn

Жыл бұрын

And I'll help push!

@davidelliott5843

Жыл бұрын

The inner sill will be just as bad and opposite side won’t be much better.

@whiteroomstpauli

Жыл бұрын

30/30...😂 hahaha

@loubakker5000

Жыл бұрын

😂😂😂 Good one !

Most of the time that type of rust made its way out from the inside, the whole thing needs to be cut out and replaced as well as finding how the water found its way inside

@user-vt1vy2bp8r

7 күн бұрын

Нет брызговиков. Не удивлюсь если и подкрылков нет. Их ещё локерами называют. + конструктив машины склонный к затеканию и попаданию воды и грязи внутрь.

Nicely done Sir!😁🙏

That's a "someone else's problem" special right there.

@chuckster243

Жыл бұрын

You know it. He went through the steps of using a spray gun. This is backyard, but not his first rodeo, probably not the last either.

Elderly driven. Always kept in the garage. This is a bargain.

@williambray7784

Жыл бұрын

Yep....old lady chillaxin. She doesn't drive anymore.

Websters definition of “ buy here, pay here “😂😂😂

Maybe it's his own car folks. Calm down.

That'll be rusted back out in a couple of years because the rust wasn't actually removed...you've got to cut it out, treat the inside with a rust converter/encapsulator & weld in new metal...there's still rust in that panel...

@bobberbuilder6122

Жыл бұрын

Probably last 2 months basically a complete waste of time and materials 😅

@Gregorio413

Жыл бұрын

What about adding a self etch and epoxy primer same with a coorsion resistance filler ?

@Road_Rash

Жыл бұрын

@@Gregorio413 the rust is on the inside of the panel, there's no shortcuts when it's that bad...must be cut out & replaced...

@Gregorio413

Жыл бұрын

@@Road_Rash right thank you right about surface rust ?

@thatman4853

Жыл бұрын

​@Road_Rash well then it's on all of it in the back then.i bet your one of those people that say a car is rust free huh?😂😂

Enjoy the rust when it comes back

@stefanp8137

Жыл бұрын

He don´t have to wait very long 😂

@mysterysolver514

5 ай бұрын

Wont rush on the bondo

@joeleyendecker5346

2 ай бұрын

It never left....lol.

That repair should last about as long as your lungs

Me day before inspection

That will rust out in about two minutes

@dunk5647

Жыл бұрын

A stuff Job like that won't even make it through the booth without busting through again

@extazzz_0713

4 ай бұрын

😂😂😂😂

Start the countdown clock on rust bubbles popping up under the paint. Good enough to sell the car...

You have to remove the rust that is etched into the sheet metal ... in our shop, we sometimes used acid (muriatic I believe) to remove the etched rust ... then and only then will the rust be properly removed.

The tile of the video should be “how car yards fix rust on cars”

Sieht schön aus, hält nicht lange!

Nicely covered, but the problem is from the other side of the sheet, uncle :-)

Very good! Reminds me of my time at the construction training centre over forty years ago: there were a few civil construction apprentices (concreters) who fixed the rusted-through floor pans of their cars with reinforced concrete. Didn't pass the mandatory TÜV inspection, though. Small mercies.

You are "Janusz"!!!

Don't let that get wet

Хорошо проёмы защитил

Actually You can stop rust , open it up, clean it out, kill the rust with a good neutralizer, and undercoating, ether glue or weld in a patch panel. Lasts for years.

hell yea. out of sight out of mind! will be waiting for part 2 redo in like 6 months cause it's bubbling from nonprepped rust 😂

“Perfect condition paint”

That might look good but in 3 months time the rust will be back worse than before. It should have been cut back to good metal, new steel welded in, then filled, prepared and painted , not a botch job

May I suggest a treatment of naval jelly and a brushing with a wire wheel before applying body filler. You need to neutralize the rust first.😮😮😮😮

The gift that keeps giving

Out the driveway warranty

Amigo la proxima vez recuerda poner un poco de spray antioxidante antes de poner la masilla por 10 euros que vale merece la pena

Just like the flowers of spring, both will blossom.😂

No rust neutralizer on the opposite side will still keep rusting and spreading like cancer. I guess for an older car you don't plan on keeping like a classic that's fine work.

Tidy enough repair,get it sold move onto the next.

People who fix other people cars like that should be put to jail asap!

Nicely done, but cutting out the rot is better than disguising it imho

You didn't get the rust out u just cover it up

Once rust starts, you can't stop it.

@NikosPer

Жыл бұрын

rust converters (?)

@DonaldAJr

Жыл бұрын

@@NikosPer What does a rust converter have to do with anything? From my understanding once you have rust you have to start replacing panels. Slowly but surely it's coming back so it's a done over and over again. You weld on new structure but slowly but surely it's gonna come back.

@NikosPer

Жыл бұрын

@@DonaldAJr there are special nozzle sprayers that spray rust converters in all intricate nooks and crannies, after the first grinding off rusty parts - inside door panels etc. Look it up, Russians do it at least a decade.

That's the way shady wheeler dealers do the job.

Magnet helps to detect jobs like that especially on cars older than 2000 because they were build out of metal not like modern cars they're build up to 70% out of plastic 😢

What was that???😮😮😮

LOL.. say hello next year

Для информации, с наружи хорошо. От ржавчины обрабо али с наружи, но пороги из внутри гниют, нужно там всю грязь убирать и внутрь задувать мовиль или нигрол

be bubbling in no time great work

Duh, the rust is still there. Do it right!

great job , theirs no way that will ever rust again. you should fix the rust on the frame the same way!!

Thats what they do to a quick flip vehicle

Maybe if bodyshop labor wasn't so expensive, more ppl would take their cars in to get rusty patch panels cut out and welded on. Who wants to get a $5,000 bodyshop bill for something like this? The welding bill will cost more than what thecar is worth.

Thats a crap repair the rust is still there and will come back within a few months

До первого дождя 😂😂😂😂

Так ведь можно же😮 почему наши кузовники говорят что надо всю машину разбирать для покраски или новые крылья и пороги покупать....

That's like packing the pumpkin with sawdust so it doesn't make noise brake fluid in the transmission so it doesn't slip

Should have gotten hes welded friend in or whoever to cut that out then do your thing unless the client actually didnt have money and asked to do it that way for now as budget it tight

Straight up for sale after that shit show of a... I can't even call that a repair, described as 1 careful lady owner no rust dints or marks

Fair play. Cheap repair. Does the job. Someone needs to do a before and 3yrs after on repairs like this - however. I'm not convinced either way until then.

This is the way we used to do body work. I see from the comments that this crappy quality of work is not acceptable.

Hack job!

Give it 2-3 months and that will be the same again

Это когда вовремя, корозия не сквозная... Ремонт грамотный...

It must be primer first be applied prio5to putty,corrosion will easily attack to un-primed surface even putty is applied And finished with paint.

Aprendan como hacer un mal trabajo por encima de lámina contaminada y pudre 😅

Trabalho meio boca massa em cima da ferrugem

That's a good reason to do a Carfax if possible to find out where a car has been registered and also looking under a car thoroughly is important .

That’s awesome! Solid work

Rust is like cancer if you don’t get it all out it comes back.

If there is through hole, it means metal inside needs to be protected somehow too. Outside ok but protect and weld for long lasting results

No llega hasta el óxido y tampoco pone un tratamiento contra el óxido , después pasta masilla a tope . Y luego sorprende que se pudra de nuevo.

Just hiding the rust

Не бит, не крашен, один хозяин

That rust was caused by water/salt retention. It starts with a little dirt and flaking rust plugging the drains. It is rusting from the inside out. If rust inhibitor is not applied along with cleaning out the dirt rust accumulation, you have fixed nothing.

The sand blaster The cut off wheel The metal patch And the welder have all left the chat.

1 lady owner, no pets, no issues with car, quick sale, moving overseas!

you get what you paid for Great job

When the metal was bare and exposed why didn’t he heat it up to remove potential moisture then spray it with a rust inhibitor then prime, sand paint etc ?

⚠️I avoid buying resprayed cars like the plague, and I can spot them a mile off

This is why you buy classic 40 50 60 year old cars in states like Southern California, Arizona, Nevada, New Mexico....

Looks good, and it will last long enough to sell it, but it’s deception. A job worth doing is worth doing right or at least put more work in it to make it last longer. Try to grind as much rust you can with a drill bit or pointy grinding rock, knock it in some, then fill OR if your metal skills is good, cut a thin piece of metal and weld or rivet it in then fill edges.

That should rust right back through nicely 👌

These are the people you never buy cars from. Will say never been in an accident, no rust.

This being the reason I pack magnets

You body worked over rust nice job buddy

🤦самое важное это попрыскать в этом деле, а потом дырку замазать шпаклей😂 и через месяц жди жуков.

It does look pretty, good though

Did a great job painting the jackstands also

Awesome job bro 👍

helped me fix all the rust on my iroc so i can sell it thanks

Didn't cut out the hole and weld in with good metal; but even if you didn't want to go that far, no rust treatment, no zinc primer, no etch primer...... bodge it and run comes to mind

The best way to do it would be let it dry and then cover the area with diamond plate so that the stones and rock never hit the rocker panels. that’s what I did to my truck and I’m going on the 10th year with no rust

Никогда так не делайте! Это равносильно тому, что стоматолог вместо удаления кариеса покрасит зуб белой краской 🥴

Rust never sleeps

Metal should have been treated with Rust converter

Good idea to cut out rust and it is in a prescribed area😮

Eso está tapado o perreado como decimos en Argentina, no reparó la chapa, la tapó con masilla plástica.