Rupes 15 or Rupes 21? Which one should you buy and what makes them different? 5" or 6" polishers?
Автокөліктер мен көлік құралдары
In this video we discuss the real life differences between the Rupes LHR21 and the Rupes LHR15 and talk about which one you should buy!
Please like, comment and subscribe for more content or view our teachable online training academy!
courses.iglcoatings.com.au/
Пікірлер: 69
Thank you for explaining this I am in the market for one of these tools since I watch your vid it’s more clearer now
@iglcoatingsau
Жыл бұрын
Glad I could help
Very informative much needed info thanks dude your video was awesome!
@iglcoatingsau
2 жыл бұрын
Glad it was helpful!
exactly what i needed. thanks!!!
Thank you so much, this really helps a beginner out!!!!!!!
@iglcoatingsau
2 жыл бұрын
My pleasure!
Perfect video who those deciding which to buy
@iglcoatingsau
6 ай бұрын
thank you!
Good explanation.. Thank u so much!!
@iglcoatingsau
2 жыл бұрын
Glad to be of help! Please let me know if there are any comparisons you would like to see!
Great video- thx!
Very informative
Hey great vid I had a quick question what rupes rotary do you recommend that doesn’t have the throw or sway that can be used angled I do boats so staying flat isn’t an option a lot of times , I’m coming from a Mikita
@iglcoatingsau
Жыл бұрын
To be honest I cant answer that as I havent used rotary, maybe try forced rotation
@Baycofishing
Жыл бұрын
@@iglcoatingsau right on I got a Mille just didn’t know if you had a rupes rotary recommendation I was lookin at the lh19e but I think I’m just gonna go with a flex rotary for the weight , anyway appreciate it have a great day 🤙🏽
Can you finish well with a 21mm da?... i mistakenly got a 21mm when i actually wanted 15mm and im worried i might not able to get a nice finish because of the big throw
@iglcoatingsau
11 ай бұрын
Yes absolutely, a 21 finishes just as well as a 15
I am looking at this brand for a replacement of my 5 inch dual polisher. I know Rupes is the top of line. I also have a 3 inch machine and 2 inch machine. I am a homeowner with 2 classic sports cars. One has single stage paint and the other has a clearcoat. I can only afford one machine right now, so you recommend sticking with the Rupes 5 inch 15 throw? I mostly use foam pads for all three machines and I use the Jescar products.
@iglcoatingsau
2 жыл бұрын
i would stick with the 5" as long as you have a 3" as well!
@Birdy-by9cg
7 ай бұрын
I just bought the lhr15 a amazing machine
I am a DIY detailer and have used my old PC 21mm D/A polisher for several years. I still have several new 6" pads. And, I would like to go to a 15mm cordless polisher now. But I do not have any 5" pads. Are you recommending that I should stay with a 21mm thow D/A polisher? Thank you very much sir.
@iglcoatingsau
2 жыл бұрын
In your position I would keep the 21 6" and buy a 3" smaller machine rather than switching to a 5"
@dtna
2 жыл бұрын
@@iglcoatingsau Thank you very much sir.
Awesome video man. I don’t know about you but my 15mm stalls on every body panel. Been detailing for 8 years been paint correcting for 6, I’ve never had any problems with my 21mm or my 3inch but the 15mm is terrible, what could be the situation? I know how to use DA’s
@iglcoatingsau
2 жыл бұрын
The 15 does have a lot less torque and you need to run it at higher speed but the washer mod also helps!
@danlc95
2 жыл бұрын
Check your backing plate. It should be in contact with the rubber shroud. But it should also be lubricated periodically. I have the Duetto, and ran into that problem after a thorough cleaning. I was met with almost constant stalling, then rubber chunks being spat on to the area I was polishing, and finally the shroud wore away and it was free spinning. Then I found out about keeping the shroud lubricated, and have had success ever since. I'm not a fan of the washer mod. It gives me way more vibration, and an over all rougher ride. On the performance side, it decreases oscillation, and increases rotation. Oscillation is where the bulk of the cut comes from (70% according to Rupes), where the rotation aids in keeping the surface cool and for getting a good finish.
@iglcoatingsau
2 жыл бұрын
Thank you for the feedback, we have the washer mod
@klinikformanuelmedicin5794
2 жыл бұрын
I’m quite new to this could you do a video explaining when to use the different speeds?
@iglcoatingsau
2 жыл бұрын
No problem at all. That is easy to do!
Hi. Thank you for the video. Great explanation. What would you recommend LHR 15 or 21 Mark III?
@iglcoatingsau
9 ай бұрын
Thank you for that feedback. If you could only afford one machine pick the LHR15. If you could afford two machines then certainly pick an LHR75 as well as a LHR21
@DexterousGamings
9 ай бұрын
@@iglcoatingsau thank you for this quick reply. Have a Blessed day
@bobwhisenhunt7085
Ай бұрын
Can you use the LHR 15 for paint correction and polishing?
@iglcoatingsau
Ай бұрын
@bobwhisenhunt7085 yes absolutely
After heavy cutting with 7 inch rotary, which DA would be more suitable for finishing, 21 or 15 mm?
@iglcoatingsau
2 жыл бұрын
Both would be suitable just depends on how well you finished off with the cutting and also your experience with DA. The 21 will cut faster than the 15
@blopacr
Жыл бұрын
For finish i think 15...
@jacobshank9362
Жыл бұрын
If you can finish well with rotary, the 15 will be superior choice for finishing, especially on edges of panels, and tight spots. I run wool on my 7" rotary and finish down to very fine rotary markings, and then hit with a 15mm (soft pad/finish polish) to clear up those markings. A lot depends on the paint though.
Hello. What are your thoughts on a gear driven DA like the Rupes Mille or Flex XCE that have zero pad stall?
@iglcoatingsau
2 жыл бұрын
I have tried both brands you have mentioned. I don't see any particular advantage of disadvantages for an experienced user. They will both do the job well. Gear driven allows to change different size backing plates but also has a higher risk of damaging the car but in terms of working speed and results they are in my view equal
@jamess.7415
2 жыл бұрын
@@iglcoatingsau Thanks for your insight. Last question, did the gear driven finish out on softer paints well? Heard that a non gear tool would be better for softer paints. Seeing your take since you used both. Thanks again.
@iglcoatingsau
2 жыл бұрын
@@jamess.7415 as we exclusively use DA's in our workshop I cant answer this question from personal experience but we know many reputable detailers who exclusively use gear driven without any issues in finishing.
@jamess.7415
2 жыл бұрын
@@iglcoatingsau Thanks for the insight. Just deciding on which direction to go.
@iglcoatingsau
2 жыл бұрын
I would recommend DA, a little bit harder to learn/use at the beginning but in my view more versatile and safer
What size foam pad you use for rupes 21?
@iglcoatingsau
Жыл бұрын
All the pads we use for 21 are 6"
Do u like rotary for correcting. Then use the random orbital to finish
@iglcoatingsau
Жыл бұрын
To be honest I have never found the need to consider rotary
@John33lawn
Жыл бұрын
@@iglcoatingsau what r good brands besides rupes polisher ro buy. I been looking at a 21 mm
@iglcoatingsau
Жыл бұрын
@@John33lawn we have heard a lot of good feedback about flex tools
@TheKobie123456
Жыл бұрын
Will it buff 3000 out?
Do you know much about the Vertool 21e?
@iglcoatingsau
7 ай бұрын
no i dont unfortunately
Starting a mobile detail business. Would you recommend 15 or 21
@iglcoatingsau
8 ай бұрын
Hi mate you can't go wrong with either one but a 15 in my views is more versatile and will lead to better efficiency
@tyuspoletti
8 ай бұрын
@@iglcoatingsau thanks!
I have heard you can interchange 5" and 6" backplates on the 21 machine, which comes with the 6" backplate, Having said that, the same place where I head that also advised that you can NOT interchange 5" and 6" backplates on the 15 machine, which comes with the 5" backplates. You say that you simply can't interchange in these machines due to counterweight, but have you considered that you can interchange one way only with the 21 machine?
@iglcoatingsau
11 ай бұрын
I have used this method before and changed the backing plates. It leads to vibration and poor performance. The difference with the machines isnt the size of the pad/backing plate but rather the throw. If you put a 6" backing plate on a LHR15 you wont get the same result as a 6" backing plate on a LHR21 as it will be 15mm throw vs 21mm throw and vice versa. The machines also spin at different RPM
Which one is the ROTARY?
@iglcoatingsau
11 ай бұрын
neither is rotary
I know this is a year old video but, in the beginning of the video, you were stating the 3", 5", or 6" which doesn't really make sense to debate on when really it's all about the throw of the machines. Really this debate should be centered on the fact that these machines are: 12mm (3"), 15mm (LHR15) and 21mm (LHR21)--due to the fact that you can get a 5inch backing plate for the LHR75E, a 6" b.p. for the LHR15 and a 5inch b.p. for the LHR21.
@iglcoatingsau
Жыл бұрын
Yeah but if you can only afford one machine it is important to know the difference and pros and cons
Like in mm
@iglcoatingsau
4 ай бұрын
Is this a question or a statement?