Run a Hard Disk Drive Brushless Motor With A Phone Charger
Ғылым және технология
Today I will show you how to run a hard disk drive (HDD) brushless motor with a phone charger.
In this video, I will explain how to connect SATA power cable with phone charger and "hack" it to run forever and don't stop.
This tips also apply to Laptop's HDD 2.5".
** LIST COMPONENTS **
- HDD Hard Disk Driver
amzn.to/37Kv7K7
- Digital Multimeter
amzn.to/3hgvaAt
- Phone charger 5VDC
amzn.to/2KRQIas
- Charger 12V
amzn.to/3mHyrtK
#HDD #HDDMotor #BrushlessMotor
!!! DO NOT COPY & REUP !!!
***********************************
- Website: goldscrew.blogspot.com/
- Facebook: / goldscrew-diy-10836235...
- Twitter: / screwgold
- Pinterest: / goldscrew
Пікірлер: 141
Thanks ❤ your Pin shorting method helped me to run motor continuously
Thumbs up.great research.hard work
Thanks you, so wonderful👍👍
Thanks. so cool🌹🌹🌹
you are very smart and creative
Wow very nice 👌 👏
Thank you for useful video. Wife comes in at 8:00 👍
thank you
대단합니다
Thanks ❤
Good👍
Congrats..
Hey man, so i tried this setup and did work without a problem, But i have a question if you might know or if anyone else does, I have an adapter for the USB that has Output 5V 2.0A or 9V 1.67A or 12V 1.25A. So i was wondering if i can use the 4 wires in the usb cable, red - black to sata red - black for 5V and the other 2 in the usb cable to Yellow - Black Sata 12v and then connect it to the adapter that has all those outputs or would it not work like that because the adapter can only have one of the outputs "active" at a time? Thanks in advance and great video :)
Thanks for the video , I think we can use a single 12v adapter and a voltage regulator for the 5v input
@lancelotdsylva6114
3 жыл бұрын
How to check the motor
@GoldScrew
3 жыл бұрын
Yes, You're right! Or can also use a booster from 5v to 12v. Very much module/board available for sale right now (but better is from 12v to 5v). Hope you enjoy :D
@jayantamondal4938
3 жыл бұрын
Yes , a simple .
@harpergenesis5289
2 жыл бұрын
Instablaster
@neroncrasso
3 ай бұрын
@@GoldScrewU need only 1mA for logic at 5V & 1A at 12V for motor driver, booster is nonsense
Best👍👍💖
@GoldScrew
2 жыл бұрын
😍
Unfortunately mine doesn't work. I have a 3TB Barracuda DM001 and neither the 6+2 or 3+5 pin shorting works. It stops after 10-20 sec. Plus mine requires the r/w head socket to be bolted on, as I see yours is not, it has contacts on one of the two screws holes. I guess it's a hit and miss, have to try other methods.
@letien2947
2 жыл бұрын
You can test 2+6+7 pin.
👍
You connect pin 2 with pin 6 to avoid stop with SATA HDs, do you know if there is a similar connection with IDE HDs? Thanks.
@GoldScrew
2 жыл бұрын
I'm not sure about IDE HDD. I will research it and update and let you know soon asap. Thanks for your question!
@Nebby_99
2 жыл бұрын
Bumping this question! EDIT: Never mind, it's answered below!
@pacoperezabella
9 ай бұрын
PIN 1 AND PIN 2 of data conector. up right 1, up left 2. Sorry for my bad english.
nice
@GoldScrew
3 жыл бұрын
Thanks for watching :)
@editz_picture4137
3 жыл бұрын
@@GoldScrew welcome
Love the idea would love to do it myself. Only concern is (and I might be 1000x wrong),would it not burn it out? I mean if you're using something that is resisting against it whilst spinning? Genuinely curious,apologies I'm totally new to this kind of thing. Keep up the awesome content :)
@GoldScrew
2 жыл бұрын
Thanks for watching, There are a lot of people who have tried making this grinder with a computer HDD, so I think it will be fine!
@jamiewilson6900
2 жыл бұрын
@@GoldScrew haha yeah I'm sure it would be and because they're so cheap it would be easy to just make another :)
In case of pata connector which pins has to be connected for running continuously ??
@countzero1136
3 жыл бұрын
Many IDE type hard drives will spin continuously as long as the power is applied, but not all. In particular, Western Digital drives won't stay spinning in this way, stopping after a few seconds.
@adriel3305
3 жыл бұрын
first top left and last bottom right, or bottom left and top right, don't remember now.
@sundeepkancharla2346
3 жыл бұрын
@@adriel3305 could you tell in detail using pin numbers.
Why do you need 12v& 5v to operate the motor ? Can I only use 12vdc with a speed controller? Thank you
@GoldScrew
Жыл бұрын
It’s depending on SATA power standards! Yellow wire need 12v…and other color need 5v. You can using only 12v and downgrade from 12v to 5v. Understanding the standard SATA power supply pins in the HDD | Gold Screw kzread.info/dash/bejne/lJ2Cj9WNhNergKw.html
@manohar3787
7 ай бұрын
the motor needs the 12v and the logic board needs 5v is my understanding and in order for the motor to work even the logic board should be powered up
Hy! Why do i have only 3 wires on the hdd motor?
My bro, Why don't you have this written out? Your video is of little help because we can see what wires you are connected to for + and -. Is that the SATA plug you are making your connection to? By connecting pin 3&5 to one another, what is that for/doing? Which wires on the yellow, black, red, and orange connector do we connect to? just a small listing of what wires you are connecting your 5V + to and 5V - to. If we reverse polarity, does it spin in reverse? prob not if its brushless.. Anyways, text is always best, video is good as a visual reference, as an aid. thanks man.
@GoldScrew
2 жыл бұрын
Yes, that's right. I should have explained in more detail. However, because of the time at that time, I did not have much and I also wanted the video length to be moderate. Why don't you find your own the answer: try reversing the + and - poles...etc? This is not difficult at all. And please share with me the results :) Thanks for watching!
I shorted the 3 and 5 pin in sata but it still not continiously spinning, any solution
@countzero1136
3 жыл бұрын
Try linking pins 2 and 6 instead, but bear in mind that not all drives will work like this - it seems to be a sort of undocumented feature that's not universal across all manufacturers
pin 2 and 6, but my hard drive is ide / PATA. do you have any solution?
@GoldScrew
2 жыл бұрын
Sorry, I'm not sure about IDE/PATA!
Mine doesn't want to start spinning, do you know what the couse could be? Thanks
@tony5226
2 ай бұрын
its fake, motor needs a special circuit called "driver circuit" for it to be able to spim
hey pin connection not working for me, not 3-5 nor 2-6 or 2-6-7.. it stops after seconds, can anyone help ?
That hard disk, works both on 12 and 5 volts
Hello. Can we use a 5V adapter and a regulator instead of the 12V in order to control the motors speed ?
@GoldScrew
3 жыл бұрын
The best is 12V, because the brushless motor required 12v. So if you want to use 5v, you'll need a DC-DC boost converter
@abbashammoud7205
3 жыл бұрын
@@GoldScrew i tried it and it burnt the motor. Any explanation for that ?
@GoldScrew
3 жыл бұрын
Maybe something wrong at wiring step! I can’t see more detail your issue, only text here is very difficult. So I don’t have any ideas 💡
@XenyQ_OFF
2 ай бұрын
@@abbashammoud7205 probably you connect it wrong or the voltage is too high
好
Hallo saya ingin bertanya ? Bagaimana dengan hardisk yang memiliki 3 pin .cara menentukan voltase dari 3 in tersebut antara 12 volt ground dan 5 volt nya
Cho mình hỏi motor quay liên tục hay khoảng 30s tự dừng vậy bạn.
@GoldScrew
3 жыл бұрын
Nếu không nối hai chân 3 và 5 thì quay một lúc nó sẽ dừng lại bạn ạ! Còn nếu nối hai chân đó lại (hoặc chân 2 với chân 6) thì nó sẽ quay liên tục. Mình có nói rõ trong video rồi, phút 6:35 kzread.info/dash/bejne/kaphy5WYp6_bn7g.html
@MeowCuteness
3 жыл бұрын
@@GoldScrew Mình nối cả 2 cách mà vẫn bị quay 30s rồi dừng. Vậy mới chán chứ.
@GoldScrew
3 жыл бұрын
@@MeowCuteness Thế thì khó hiểu thật. Vì mình thử cũng phải 2,3 loại ổ cứng của các hãng khác nhau như Seagate, Toshiba...thì đều chạy ổn cả!
@lifediy3534
2 жыл бұрын
Chân 3 và 5 không chạy, 2 và 6 cũng không chạy chỉ được 15s
@monore2536
2 жыл бұрын
@@MeowCuteness Như mk nối rồi vẫn chạy 30s rồi ngắt
Can you please confirm on how to do it for IDE HDDs ?
@GoldScrew
2 жыл бұрын
Maybe you'll need an adapter to switch SATA to IDE
@shouldbewillbe2813
2 жыл бұрын
@@GoldScrew thank you for your prompt response and keep up the good work.
@GoldScrew
2 жыл бұрын
@@shouldbewillbe2813 I will trying to find old IDE HDD and make other videos soon. Thanks for watching!
@shouldbewillbe2813
2 жыл бұрын
@@GoldScrew please do pass on the link of video to me as soon as you have made it. Thank You, you are the boss
@linuxuniverseofficial
2 жыл бұрын
For IDE drivers you need to jump the first up pin on right corner, with the down pin on left corner. FOr SCSI IDK
Will this process work for dvd drive motors also? 😶 Please reply
@GoldScrew
3 жыл бұрын
I'm not try it with DVD drive motors. But if it's brushless motor, I think it's can run no problem!
@emilsamuelsson1001
3 жыл бұрын
Ye
@emilsamuelsson1001
3 жыл бұрын
It Will work. I have tried it before
@smartgamersify
3 жыл бұрын
@@emilsamuelsson1001 it didn't worked for cd drives brothers and sisters.. seriously I've tried thrice 😭 .
@Dax_eth
3 жыл бұрын
@@smartgamersify it should work if its a brushless motor that can run with DC powersupply
Mình dùng ổ cứng ata đời cũ thì nối thế nào để chạy liện tục được ad. Cảm ơn ad nhiều!
@GoldScrew
3 жыл бұрын
ATA thì mình chưa thử, nhưng mình nghĩ không cần nối có khi nó cũng chạy liên tục rồi bạn! Giống cái ổ HDD cho laptop 2.5" mình chưa cần nối nó cũng chạy liên tục luôn rồi.
How to run the laptop's old ide harddrive?
@GoldScrew
2 жыл бұрын
I’m not test with IDE. So I’m not sure the IDE HDD can be run or not yet!
Hey plzz tell me , I have 2 black wires and 1 yellow, 1 red
@GoldScrew
2 жыл бұрын
It's same my wires. Yellow: + 12V Red: +5v 2 Black: is GND. Connect it like in my video!
What About ATA HDD
Mình làm giống bạn. Thử nguồi 5v và 12v nó vẫn không quay. Chỉ cắm vào nguồn của máy tính nó mới quay thôi.
@GoldScrew
2 жыл бұрын
Nguồn máy tính thì bản chất nó cũng cung cấp nguồn: 12v, 5v, 3.3v thôi mà bạn. Nên có thể bạn cấp nguồn sai đâu đó thôi. Bạn thử lại xem!
Phone charger has only two wire while connector has five wires . Where others wire comming from.
@GoldScrew
3 жыл бұрын
It's SATA standard. You can check other my video to understand it: kzread.info/dash/bejne/lJ2Cj9WNhNergKw.html
Pemasangan kabel motor nya bebas atau tidak bos
I have 4 pin sata cable
What's the catch here...wat do we gain out of it...kindly explain
@GoldScrew
2 жыл бұрын
You can using the old HDD to make many DIY products: Grill…you can search it on KZread! And with my solution you don’t need ATX power supply or anything else.
Nó vẫn bị dừng một chút rồi mới quay tiếp đó bạn.
Connection for PATA
@GoldScrew
2 жыл бұрын
😋
5 v ?
Can we take out that bldc motor
@XenyQ_OFF
2 ай бұрын
Yes
Who watch this video in 2021 .... Reply please ☺️☺️
@GoldScrew
2 жыл бұрын
Thanks for watching 😋
💓🌠🌷👍✔
What's the point?
@aimotionlabslabs744
2 жыл бұрын
It can be used for various projects need, for example grinder, pov led, etc
Rõ là nó chạy 2 mức nguồn
I tried it but motor can't run any explanation
@GoldScrew
2 жыл бұрын
This method working only with SATA HDD. If your HDD is ATA...it's can not run!
not work why????
@GoldScrew
2 жыл бұрын
Maybe your HDD is ATA or IDE! This guide apply for SATA HDD only.
I did everything exactly like you and it didn't work
@GoldScrew
2 жыл бұрын
What model/brand HDD you used? Maybe it’s different than my model. I will update other solution soon asap!
Ban chi can 12v ma thoi
menuda pérdida de tiempo gastos de energía eléctrica y decís que funciona solo con 5v y luego con el disimuladamente pones un cargador de 12 v menuda estafa no te daremos LIKE
Tried this and does not work at all
@XenyQ_OFF
2 ай бұрын
It works. Make sure not wrong polarity or ended up frying
@XenyQ_OFF
2 ай бұрын
It work's make sure right polarity or you will fry it
@jakubthewildbirdsaver2947
2 ай бұрын
They were right I followed your steps
@jakubthewildbirdsaver2947
2 ай бұрын
Either the board doesn’t work
@XenyQ_OFF
2 ай бұрын
@@jakubthewildbirdsaver2947 yes. The board does not work
Click bait. You also need a 12v DC power supply along with the phone charger.
@mmilosz1111
3 жыл бұрын
incorrect, i have succesfully powered an hdd with just a 5V charger.
@portalfire3719
3 жыл бұрын
it’s in the fucking thumbnail
@zalika26
3 жыл бұрын
can you tell me how?
@IrisFortnier
3 жыл бұрын
@@zalika262.5" hdd use 2.5 hdd enclosure powered from usb phone charger. if it 3.5" hdd use 3A phone charger and dc-dc boost...
SPEAK YA MUTE
I try not work . 🤔😠
@GoldScrew
2 жыл бұрын
Maybe your HDD not SATA! This video apply for SATA only, about IDE HDD...I'm not sure about it. I will research it and update and let you know soon!