Ruler Marking Gauge - Without Screws Push and fix
Тәжірибелік нұсқаулар және стиль
The ruler marking gauge I made in my previous video got lost while moving my workshop. So I needed a new one. I wanted to make a new one. It was working with the old ruler marking gauge screwing system. This inadvertently caused the ruler to slip. During compression, the ruler slipped and I could hardly get the size I wanted. To solve this problem, I designed a new ruler marking gauge. There is no chance of the ruler slipping in this new one. It was an extremely practical and wonderful ruler marking gauge. It has a fast and practical use.
You can find all dimensions in the pdf document.
➤PDF (dimensions-plan) download page : www.greensawdiy.com/ruler-mark...
#designedbygreensaw #rulermarkinggauge #diygauge #rulermarking
➤Tools/Supplies Used :
Sanding Machine : • DIY Sanding Machine Be...
Table Saw Sled : • Table Saw Sled Making ...
Drill Press : • Drill Press Making - D...
➤Subscribe kzread.info?sub...
➤My website : www.greensawdiy.com
➤Join : / @greensaw
➤My Playlists:
Cleaning : • Cleaning
How to make ? : • How to make ?
DIY Power Tools : • DIY Power Tools
Wood Works : • Wood Works
Sanders : • Sanders
Drilling Tools : • Drilling Tools
Clamps : • Clamps
Band Saw Making : • Band Saw Making
3in1 Work Table : • 3in1 Work Table
Strong Drill Press building : • Strong Drill Press bui...
WoodTurning : • WoodTurning
My Shorts : • My Shorts
Пікірлер: 39
Awesome tool. It`s better than my current one. Will make it for my woodshop today. Special thanks for the detailed PDF with drawings and dimensions. You are the best! ❤
@GreenSaw
10 ай бұрын
I'm glad you liked it. Thanks for your beautiful comment.
Nice design
Toujours aussi excellent ! bravo 👏👏👍👍 Merci pour les plans
Лучший вариант линейки из тех что мне встречались! Обязательно повторю, тем более что у меня есть металлические линейки одинаковой ширины длиной 150, 300 и 500 мм, что делает инструмент более удобным в работе. С меня ЛАЙК и подписка!
@GreenSaw
11 ай бұрын
Я рад, что тебе понравилось. Спасибо за ваш красивый комментарий.
Excellent idea! I will be making one. Thanks for sharing.
nice work dude...
Well done.
Great idea.
Eline sağlık güzel iş çıkarmışsın. Yaptığınız aletleri videolarınızda kullanmanızı seviyorum. 👏👏👏
I love your videos. ❤
süpersin ustam ücretsiz pdf verişinle seçim kaynağı oluyorsun bu kadar kanal içerisinde
@GreenSaw
10 ай бұрын
Beğendiğine sevindim. Yorum için teşekkür ederim.
Bonsoir, Merci pour cette superbe vidéo. Quel talent et quelle créativité. Du très beau travail.
@GreenSaw
9 ай бұрын
Je suis heureux que vous ayez aimé. Merci pour votre beau commentaire.
Really beautiful work, dude! Nicely done! 😃 It really turned out amazing! Stay safe there with your family! 🖖😊
@GreenSaw
11 ай бұрын
Glad you like it my dear friend. With my deepest regards
Eline sağlık üstadım. Çok güzel bir proje oldu
@GreenSaw
11 ай бұрын
Beğendiğine sevindim. Güzel yorumun için teşekkür ederim. Saygılar...
It was 'Greensawrd' 😂 👍
Bravo come sempre!!!👍😀
@GreenSaw
11 ай бұрын
Sono contento che ti piaccia, grazie per il tuo bel commento.
Nice
Valeu muito obrigado!
@GreenSaw
3 ай бұрын
Obrigado pelo seu comentário.
top
Gracias por el video, lo voy a construir. Una pregunta: cuál es la cola que usas y qué es lo que le rocías luego? Gracias! Thanks for the video, I'm going to build it. One question: what glue do you use and what do you spray on it afterwards? Thank you!
@GreenSaw
2 ай бұрын
Gracias por ver mi vídeo y comentar. He utilizado CA & Activador como adhesivo.
Tebrikler...
@GreenSaw
6 ай бұрын
Yorumunuz için teşekkür ederim. Saygılarımla.
Güzel...
Все прекрасно, лайк! Только кажется, что " тормоз" будет со временем стирать цифры на линейке. Впрочем ,линейку можно потом поменять. Браво!
@GreenSaw
11 ай бұрын
Я не думаю, что выгравированные цифры будут удалены. Дерево не может разъесть такой твердый металл! Может быть, через 30 лет... Я рад, что тебе понравилось.
Hi, congratulations for your videos and your ideas, among the most interesting of those I follow (and there are around 260 of them)!! :-) A question came to me spontaneously when I saw this: why did you use a Forstner bit to make the groove for your logo? Wasn't a cutter better? (also mounted in the column drill) Thanks and keep it up :-) bye
@GreenSaw
10 ай бұрын
Hello, I'm glad you liked it, thank you for your comment. I used a Forstner bit because my column drill has a depth adjustment. It got easier. Actually, I don't think the tool used is important. It's up to you which method you choose.
Great job I'll make one. At 8:59 and 9:03 you are using this green radius guides can you please provide us with the source of this guides...?
@GreenSaw
11 ай бұрын
Hello, I am using the tools that I 3d printed. I checked my computer but couldn't find the files. I searched on the internet and found the following link: www.thingiverse.com/thing:4752918 But I could not find the ones according to the metric system. If there are enough requests, I can design the ones according to the metric system, prepare a video and share the files.
🧐🤔😂😂😂😂😂😂😂⚔️⚔️🗡️