paypal.me/kr00tman?country.x=US&locale.x=en_US Please consider tipping if this Video helped you! All proceeds will be put right back into the channel so I can make more videos like this!

Thank you for this video, solved a couple doubts I had about the 4 plug vs 3 plug issue

What a wonderful world, a miner making gpu installation videos and gamers taking notes

@kr00tman

Жыл бұрын

Just trying to do my part

Excellent video, simple, easy to understand and made me stop worrying so much about the install :)

@kr00tman

9 ай бұрын

glad it helped, dont forget to sub and share with your friends

Thank you very much. I am getting mine tomorrow and I am so excited. But I bought a cablemod custom cable for a cleaner look.

@kr00tman

Жыл бұрын

Awesome!!! Make sure you listen for the click!!! And have a fantastic time with your gpu, hopefully you enjoyed THIS channel to see some more 4090 content I have coming!!

@jaribilesh8492

Жыл бұрын

@@kr00tmanis there a 16 pin 600watt rgb cable?

Finally got a MSI 4090 Trio and I'm so glad I found this video, thank you !!

I have a 4090 i just installed. Ty for the video as i nearly plugged in the secondary connector on the same PCIE cable but immediately didn’t when i heard you say not to. So ty for saving my GPU

@kr00tman

Жыл бұрын

I'm glad I could help!!!!!!!!! Made.my day!

Thank you so much! This is exactly what I needed. How can they charge someone 1$700 and not provide the basic courtesy of explaining this in the manual??? User error = manufacturer error if they don't provide the damn instructions! You are doing god's work my man

I bought a moddiy 4 pin adapter and plugged them all in, no overclocking on a 1000w PSU. Haven't had a single issue and I did a check of the port and cable at 2 weeks and 4 weeks. I have the same case (P600s) and will say with a moderate bend to the adapter, it does barely touch the glass.

@kr00tman

Жыл бұрын

my man you dont need this video you have everything down pat!!! thanks for sharing your success!!!

Don’t fix what isn’t broken Nvidia… just wasted over an hour of my time trying to figure this cable situation out for my new 4090. Thanks for the video!

@kr00tman

Жыл бұрын

I'm sorry you had to deal with that but better safe then sorry! I'm glad it helped, if you have any more questions about your 4090 lmk!

@larkan511

Жыл бұрын

If you're spending $1500+ on an enthusiast piece of hardware, you should be doing all necessary research to know what you're getting into. Does the 12hvpwr plug suck? Yes. But you should've known that before buying 🤔

@kr00tman

Жыл бұрын

@@larkan511 thats why I posted these guides to try and help as many people as I can!

@deluxebulls5939

Жыл бұрын

@@larkan511 Would've made zero difference if I wasted the hour before or after the purchase smart ass

Very helpful video on this subject. I'm going with the 16pin to 3x8pin cable from Cablemod for the 4080 to RM850X.

@jamesraynorr

Жыл бұрын

Bi i have exact same psu, how did you connect that psu to 4090

@kr00tman

Жыл бұрын

That's awesome please let us know how it runs!! What model did you get, and thank you for the positive feedback

@kr00tman

Жыл бұрын

Check my 2nd video on the subject I basically have the same psu, also please sub if you don't mind, helps the channel!

@BCleat

Жыл бұрын

@@kr00tman I bought the C-series Pro ModMesh 12VHPWR black with white cable. Other than the plastic cable shroud over the connector being a bit flimsy, the build quality is exceptional. I’ve checked the connector a few times since purchase, no issues. I’m probably going to get the 90 degree connector when it launches, since the cable comes really close to the front of my case.

@jackarrows1436

Жыл бұрын

@@BCleat 90° Better is, less space

Thank you for this!

This worked. I came from a 4070 and tried running the 4090 with only one connection to the splitter because it didn't tell me in the box I needed to use all 3 or 4. Thank you.

Thank you very much for making this video. My 1000w Corsair came with that high power, but I wasn't 100% about hooking up to my new 4080 super, so I went with the 3-plug just to be safe. Definitely will be switching to that single high power cable tonight. Thanks again bro!

@kr00tman

4 ай бұрын

Glad I could help

ty for your video and making this, appreciate you!

I was using the cablemod cable but it came out with factory problems (black screen and 100% fans), now I'm using the nvidia cable and everythings perfect, first I made sure to watch your video lol.

@kr00tman

Жыл бұрын

im glad it helped!!!!!!! I plan on doing more guides in the future!

I bought the vertex gx-1200 and will use the supplied 600w connector. They recommend in the box to not bend the first 35mm close to the connector of both side, the one connected to the power supplied and the side connected to the graphic card. I don’t know depending of the case if the graphic card is in a pci e motherboard slot if there is enough clearance for 35 mm. But it should.

Very good video, thank you.

This was helpful. Thanks buddy

@kr00tman

Жыл бұрын

I am glad I could help! I hope you enjoy your new gpu over the holidays!!!

Dont forget to like and subscribe and check out my guide to using psu cables here, DONT MIX AND MATCH!! kzread.info/dash/bejne/iaF816N9m8-Zds4.html

Thanks, real helpful

Thank you a lot ❤

@kr00tman

Жыл бұрын

Your welcome!

THanks for the video. Do you have a video on installing the support bracket for the RTX 4090. I need to see how much space it will take in the case. I have plans to upgrade to the 4090 in a few months

@kr00tman

Жыл бұрын

Check my older videos on the 4090 I go over it

Dont forget to like and subscribe and check out my guide on how to install an older psu to a 4090! kzread.info/dash/bejne/p4dmzsNmZ7qqdMY.html

thanks man!

I daisy chain for all 4 slots, 2 months later still going strong

Thanks for assurance on the click part, I was wondering a lot being super paranoid with my two thousand dollars GPU..

@kr00tman

9 ай бұрын

Na can never be too careful, dont forget to sub!

Thank you bro, only a question: I've an RTX 4090 Suprim X to install and I've the Corsair cable 600 W that you use in this video, if I connect it can I overclock the GPU? I've a Corsair HX1000i. Because in the 600 W cable there are only 2 cables I see, not 4 cables like the hydra main NVIDIA cable. Sorry for my English I'm Italian. Thank you in advance for the answer

@kr00tman

Жыл бұрын

Yup as far as I understand you should be just fine

usefull vid, thanks

@kr00tman

Жыл бұрын

Glad it was helpful!!!!

Thanks

Excellent quality video. Congratulations on the job.

@kr00tman

Жыл бұрын

Thank you

Just ordered mine. I bought a Gigabyte RTX 4090 and I’m so freaking excited!

@kr00tman

5 ай бұрын

That's awesome you won't be disappointed!!!

This video earned u a like and follow my dude, I'm coming for an msi 980(non ti) and I was confused af with the adapters

@kr00tman

10 ай бұрын

Thank you! Glad I could help!!!

Ur my goat bro thx

@miniyata

11 ай бұрын

If my cable doesn’t click what are good alternatives to but

10:45 - 10:48 - this also goes for life in general.

Thanks allot

@kr00tman

8 ай бұрын

glad I could help!!!!!!!!!!!!

Do you use all 4 pins in the 4 pin adapter if you have a 1200 watt psu?

Hey, recently bought a 4090 FE, im confused at around 7:08, can you explain to me what I should and shouldnt plug in? This is just as you say dont plug in two and then plug in 4. EDIT: I figured it out that 4 is fine, no burnt cables, no issues!

Bro, what do you think about the corsair atx 3.0 cable with 12 + 4 pin connector. Is it safe?

@kr00tman

Жыл бұрын

I dont see why it wouldnt be?

Do i need to remove the cable ties on the corsair 2×8 pin? And does it matter if the 8 pins into the psu are left or right?

Will my corsair hx1000 from 2020 only pull 450 watts with the direct replacement cable from corsair?

So you don’t want to run the pig tail into the adapter? As is the main cord as a split off

I heard the click, no gap on top, but it was still kinda loose like if I moved the cable left and right I would start seeing the gap, what do you think? Is that normal?

@kr00tman

Жыл бұрын

Sorry for the late reply, I think id reinstall it one more time, and check the result, but as long as you hear the CLICK, you should be ok

the pcie cables from my psu are double headed should i just use them al 3 and only plug one head in and leave the other head just hangin?

What case are you using in this video? In what cases are recommended for use for not bending cables?

@kr00tman

6 ай бұрын

Phanteks p600s, the latest model can be found here,, I love my case and even when I build a new pc ill most likely keep this case amzn.to/3NNju9R

I just want to know where you get the information about this three cable and four cable which one is the correct to use? Who is saying that?

can you explain this for the 4070 aero?

I can't really agree with the 3 = 4 statement. If the extra PCIE cable would not make sense, they wouldn't have put it. But let's assume that you have a 850w PSU and you don't OC, so the 3 cables would suffice the purpose. I would still use the 4 cables adapter just for the sole purpose of distributing less power on each PCIE cable, therefore putting less stress on the adaptor and the 4 PCIE cables. If your GPU takes up 400W, wouldn't the wattage per PCIE cable be 100W with 4 cables instead of 133W with 3 cables? And if this assumption, which is more like a technical intuition is wrong, please correct me, because I'm in the position of using either the 2 PCIE to 16pin 12VHPWR cable that came with the PSU (Seasonic Prime TX 1600) or the 4 PCIE adaptor that came with the graphics card (rog strix oc 4090). Right now I opted for the Seasonic 2xPCIE cable, but the gpu does not go higher than 460w even when pushed with oc. This alone makes me wonder if I shouldn't have used the 4x adapter that came with the gpu instead. Any help is appreciated.

@kr00tman

Жыл бұрын

Thanks for taking the time to respond to my video! So to respond to your first point, Msi at least (im not sure about the other aibs as I don't own their models, adapter wasnt a 4 pin, it was a 3 pin. To your 2nd point the plug is a smart plug which means it regulates how much power can pass through each cable, The atx 3.0 psus are designed to handle the full load via the new cables, and if your using the 4 pin adapter (with all 4 pluged in) its designed to take up to the max of 400 watts. As far as using the cable or the adapter, I use both, ( have a corsair adapter for my msi 4090, and I use 3 of the 4 pins on my founders in my other gaming pc) I can tell you the difference for me at least is only ascetic's, so its basically personal choice either or will work just fine. I also dont oc either of my 4090s, both are plugged into 850 watt psus. I hope this helps!

buy a 2000$ GPU and have to worry about the 10$ cable.... seems off

@SpaceMarine113

Жыл бұрын

Its not user error, the sheeple back nvidia because of fanboyism and buyers remorse

@larkan511

Жыл бұрын

@@SpaceMarine113 Go buy an AMD card and hope your heatsink is made properly then 🙂

@larkan511

Жыл бұрын

Same thing applies to other hobbies and things as well. It's called do your research.

@pastuh

Жыл бұрын

It's called additional $$ nvidia gets some % from such fake issues. Everything is planned.

@SpaceMarine113

Жыл бұрын

​@@larkan511 bruh you so dumb you assume instantly that i back the other camp. That right there is a slave mentality, if you are not with us you must be against us. Humanity build processors and rockets and still behaving like 3 iq chimps.

thx man. prevented me from fucking it up

Just grabbed a 4070ti zotac extreme OC, so i’m good to just use the 2 adapter connections correct? I don’t plan on doing any manual OC myself.

@kr00tman

Жыл бұрын

Yes sir!

06:47 what about specifically for the 4070 ti? will using the 12VHPWR cable with one of those that has two be an issue? I would assume it wouldn't. EDIT: I have a 12700f, with a b660 motherboard that uses 32 gb of ddr4 at 3400 mhz, currently with a 3060ti and plan on using msi's 4070ti ventus (the non oc) it comes with the 12VHPWR cable and my PSU is the NZXT C650 (from what I've seen in past videos, my psu should be fine, so 06:47 caught my attention) for _my very own specific use case_ I think it should be fine for a 4070 ti? considering I have the 12700f in its locked power state of 65w.

@kr00tman

Жыл бұрын

umm honestly I think so, maybe undervbolt to be safe, I ran a 3090 off a 700 watt psu with a 5600x with zero issues (but i did undervolt it) just make sure you use 1 single pcie cable per plug, treat it like a 3090 in terms of pwer

Hello. Thanks for the video. I have bought an ASUS TUF RTX 4090 and going to use a 1050 watt PSU, but I am not thinking about overclocking either. Should I not use the fourth plug?

@kr00tman

Жыл бұрын

Thank you for the kind words!!! And nope 3 is just fine

@dehumanized93

Жыл бұрын

@@kr00tman Thank you for the answer. Have a good day. :)

@kr00tman

Жыл бұрын

@@dehumanized93 np lmk if I can help with anything else!

@dehumanized93

Жыл бұрын

@@kr00tman Will do, much appreciated. :)

With CableMods 3x8 cable , power at 110 percent , 500 watts easy, more heat and noise, and not needed at all for everyday use , I love benching new hardware for my channel , that's the only time I OC .

@kr00tman

Жыл бұрын

makes sense, im about to do the same with a 4070ti I just picked up.

Why are you saying that connecting both extremities of the PCIe cable is not recommended?

Bro, I got this Corsair cable for my hx 1200 because the adapter that came with the 4090 looks ugly. I agree the click is important. The cable has been working flawlessly so far.

@kr00tman

Жыл бұрын

That's fantastic!!! I'm glad you enjoy it!!

@anuarde

Жыл бұрын

where u buy it?

@lucasvenarotti

7 ай бұрын

How is it performing after 10 months? I've just bought it.

For ATX 3.0 PSU (16pin 12VHPWR port) would this be okay? If I get a 16 pin that matches the 4090s regardless; would this be optimal and safe to use on the psu that is atx 3.0

@kr00tman

Жыл бұрын

Atx 3.0 will come with a cable that will work with your 4090 and it will be raited to work safely with it. Just make sure you look up the reviews on the psu

ATX 3.0 only has added low power mode to allow better efficiency at idle, that's what the sense cables/pins are for. If you don't have ATX 3.0 it means nothing for performance, just that it will be using just a few more watts at idle. Feel free to use to two connector cable, just be aware that now you have to make sure every connection is secured Side note; if your PSU has multiple 12v rails and each pair of 8-pin connectors are on deferent rails you will need to make sure you plug in one 8-Pin from each rail to make sure you don't overload one rail. I saw that back in the day with extreme OC'ing on GPU's with two 8-pins. There's usually a chart on your PSU telling you The 3 plug and 4 plug are simply for redundancy from the added failure points by adding more connectors in general, that comes from the horses mouth Jonnyguru. The PCIe 5.0 power connector IS the same as two 8 pin connectors with redundancy taken out just to make the connector smaller, again.. Jonnyguru's words.. and the man designs PSU's for Corsair *could be the multiple 12v rail issue again, if you're forced to use 3+ connectors that will make sure at least one of the connectors is pulling power from the other rail But you're totally right, the only "failure" point isn't the actual cables or connectors, it's the bad design that allows a false sense of it being fully connected.

the adapter cable plugs into the PCIE ports in the PSU right?

Hey man I'm subscribed to your channel I get the Rtx 4090 (no OC) my PSU is the Asus Thor 850. So I only need to put 3 plugs right? I don't want to screw it because was so expensive.

@kr00tman

Жыл бұрын

Yes sir!

very interesting and useful video. can you explain the diagram a bit? from left to right? again helpful vid just a bit confused. i

@kr00tman

Жыл бұрын

The power draw diagram?

After much research. If you are using an atx 3.0 psu with a gen5 pcie gpu. You do not need 3-4 8pins. These psus should come with a 600w 16pin with dbl 8 pin connector which is fine even for overclocking.

now i'm torn on using the cable that came with the Thor PSU or this lian li strimer rgb one. lol

So do we need 3 INDIVIDUAL 6+2 connectors for each end from the gpu cable?

@kr00tman

Жыл бұрын

Yes

Does the adapter that comes with it work with every PSU cable? Or do I have to buy another cable additionally to the ones that come with the PSU?

@kr00tman

Жыл бұрын

Which adapter?

@Banlara1702

Жыл бұрын

@@kr00tman the ones you pointed out as being 3 plug cable or 4 plug cable. Those are necessary to plug in the PCIE cable from the GPU. But is that cable that it comes with compatible with all GPUs or do I have to buy something additionally?

@kr00tman

Жыл бұрын

@@Banlara1702 yes it is every 4090 comes with one of those adapters

Great video. Thanks... I have a quick question because i see info on reddit and many videos. I just bought a 4090 FE and a 2 connector cablemod cable. And i plan to use plug it. But i just saw gamers nexus 4090 review where they say you need to use the 4 connectors 15:51. I dont know what to believe anymore. Thx

@kr00tman

Жыл бұрын

Can you link the cable you bought here ?

@frankgadlin4296

Жыл бұрын

​@@kr00tman THANKS A LOT!!! I posted the link to the cable, but it seems that youtube is blocking the comment because of the link. This is the one CableMod E-Series Pro ModMesh Sleeved 12VHPWR EVGA

@kr00tman

Жыл бұрын

@@frankgadlin4296 I'd check on the faq or on forums for people who bought it to see if it's comparable, but my Corsair cable only have 2 8 pins and it works just fine

Why did you skip the step where you solder the plug to the card? That's an important step, as it helps the connectivity and prevents the plug from accidentally slipping out of the socket.

@kr00tman

Жыл бұрын

ha I mean you could do that but I think thats out of alot of peoples skillsets

@shoobidyboop8634

Жыл бұрын

@@kr00tman Just kidding, no way I'd go anywhere near a 2K+ card with a soldering iron.

@kr00tman

Жыл бұрын

@@shoobidyboop8634 hahaha ngl i got a kick out of that response and was trying to come up with a cheeky response

The click thing applies to all variants of 4090? Got a strix 4090 here 😅

@Kr00man tech and mining! Hey i'm using a Be Quiet PURE POWER 10 PSU is it compatible with the RTX 4090 oder do i need a new PSU for that? if yes which one would you suggest me?

So my PSU is KruX Generator 850W Gold. I bought it a month ago. Let’s say I get 4080/90 and it comes with 3x8pin adapter. My PSU is capable of 4x8pin. I’m gonna use the power adapter that comes with GPU and use 3x8pin individual cables and it should be fine? What if there is 4x8pin plugs in my adapter? I should plug all 4 plugs when I don’t do any overclocking?

@kr00tman

Жыл бұрын

You can just plug 3 in

IF your GPU comes with a 4 plug adapter, use the included adapter fully.. don't use one less plug and DO NOT DAISY CHAIN THE PSU CABLES.. You are introducing a variable that NVIDIA removed themselves in testing and the quad plug is included for when the GPU actually tries to pull UP TO 600W which can be done without manual overclocking. If it was meant to be used with less than what came in the box, it would have been included in the box that way.

@kr00tman

Жыл бұрын

As long as you use 3 individual pcie cables going into their own ports on the GPU you are fine

@mattfire8579

10 ай бұрын

But what about the corsair cable???

@johandelarosee6732

10 ай бұрын

@@mattfire8579 The corsair cable which is 2x8 pin to 16 pin is enough. it is rated for 600W. each cable can deliver 300w

@NyteStalker89

6 ай бұрын

@senbonzakura662 You're putting more power demand on your 12v PCIE rails. Unless you have a power supply that has a 12vhpr cable, OR are using a 16pin to two or three 8pin cable like the cablemod cable(the one that plugs directly into the pcie ports on the PSU, not with that janky 16pin to 4x8pin one that came with your card) you're risking shorting something out and bricking the card or the PSU, or the entire system. With modern GPU's, using those pigtail daisy chain cables is a massive risk. There is a reason why bigger creators don't do it and have either the cablemod cable that goes straight from the PSU to the GPU, or multiple, single 8pin pcie cables for the adapter.

@NyteStalker89

6 ай бұрын

@senbonzakura662 If your cables are a single 6+2 thats fine, the pigtail/daisy chain that is another 6+2 or an 8pin, shouldn't be used. You need a standalone 6+2 or 8pin PCIE cable for each port on that adapter cable, so if it has 4 pcie 8pin ports, you need 4 cables. If you don't have 4 pcie 8pin cables or 6+2pin cables or a mix of them, your PSU is old or underpower spec for a 4090.

Is seasonic or Corsair 12vhpwr cable compatible for Asus ROG Thor 850w PSU ? and how it can be normal to plug just 2*8 pin into PSU and NVIDIA Cable adapter comes with 4*8 PIN ? thanks

@evanescence2

Жыл бұрын

I have a Thor 850w and wondering the same

What if I put a 3 PCIE adapter on my 4070ti which came with 2 pcie adapter ?

"You may not have this kind of room" Me: Laughs in enthoo 719

I like the video, but I wanted to see how to put the video card’s holder support.

@kr00tman

Жыл бұрын

Ok that's a good idea I'll put that on my list

@valentinpopescu98

Жыл бұрын

@@kr00tman thanks. The thing that look like some sort of pencil that extrudes. That’s what it’s for, right?

Wouldn't the click be the lock :) Great video

I have a Zotac 4090 and it came with the 4 plug adapter.

@doroteopratt9147

10 ай бұрын

Same I had to make an order for an extra pcie cable a few minutes ago

@jamesm568

10 ай бұрын

@@doroteopratt9147 I prefer just to buy a 2-foot 4090 power cable with the four inputs to the PSU.

You’re running 4090 (450w) on a 850w psu? What’s your set up? Particularly cpu

@kr00tman

Жыл бұрын

5950x on one and a 5900x on another zero issues

I have a long 12VHPWR cabel with the same ends one called psu and one 600w ofc i know where they go but are they safe to use on my 4080 super oc Immediately with no other extention?

are those 3 cables from vga? the ones that comes from psu

If I don't want to overclock but undervolt and power limit can I still use the three plugs?

@kr00tman

10 ай бұрын

Yes

So if your psu has the 600 watt 12vhp pin you just plug it in from psu to gpu ? Am I understanding this right ?

@kr00tman

3 ай бұрын

Yup

What about 4070 ti, is it the same? because i have 3 8pin comes with the card and nvidia said to only plug 2 of them. Thanks for the video though ❤

@kr00tman

Жыл бұрын

That's a good question, I haven't looked into it, let me check tomorrow and I'll get back to you!

@nathanbradley2882

Жыл бұрын

@@kr00tman any word?

hello so my question is that, I bought a Corsair hx850 80+ platinum psu because im planning to upgrade to a rtx 4080 which needs 3 8 pin cables, when the psu arrived I found out that it only has 2 separate 8 pin pcie cables with daisychains at the end of each, is it ok for me use 1 cable daisychain and 1 separate 8 pin pcie cable? or do I need to upgrade my psu again. PS, I dont get corsair, the older version of the Hx850 had 3 separate 8 pin pcie cables with daisychains so why did they change it now to only having 2 separate 8 pins, and the other kicker for me is that this PSU has 3 4+4 EPS power cables instead of 2 like what the hell is up with that?

@kr00tman

10 ай бұрын

Buy the Corsair cable adapter and you should be fine

Great video thank you - I got the FE and it came with no cables, not an enthusiast either lol (ditched apple after an abusive 15 year relationship two years ago). Managed to find the custom cable from SeaSonic that will go direct from my GX 850, will need to upgrade that eventually as I also plan on having two of these at least. Thanks again for the video

What if my GPU (4080 asus) only comes with a 3x8 to 12+4 pin? Do I just use that and forget about getting another cable?

@kr00tman

Жыл бұрын

Your fine, one of my 4090s had 3 and one had 4 and I just used 3 in both no issue s

I have the Gigabyte Gaming RTX 4090. NVIDIA says I need at least three connections. Thermaltake includes a single cable to go from the PSU to the GPU and says it'll be fine.

@kr00tman

3 ай бұрын

its a different kind of cable as the video explains

@vik12D

2 ай бұрын

@kr00tman I get that, it's just that MVIDIA support was adamant that it had to be wjth a 3 or 4 prong connection.

So it’s okay to use a split or pictail cable as long as you only use the main connector and not the connector that splits off of it?

@kr00tman

Жыл бұрын

I wouldnt

@trgjosh8537

Жыл бұрын

@@kr00tman it is okay. I looked in my power supply manual

@kr00tman

Жыл бұрын

@@trgjosh8537 awesome, glad you double checked!

Hi, I have the plait and the ventus 3x OC 4090.. the palit has a smal 3 pin connection to.. it’s a small cable.. but can’t find this connection on the ventus card..someone knows what this cable are for

so i have 1200 Watts but i wont OC can i just plug in all 4 just for the sake of it?

@kr00tman

Жыл бұрын

That's up to you, at that point it comes down to the looks and also for what it's worth if you only plug 3 in you actually can't go above 450

Is it safe to plug 12 pin connector if power supply is around 1000w ? And one is having lets say 4080. I am confused. This is so messy, 1st with am5 mess of amd with slow boot with mobos, Intels insane high temp cpu and now NVedia wanted make sure they also stay in news for wrong reasons

What if i only have 2 8pin cables? Is it enough?

Oh wow, I ordered 3 Pin PSU RGB cables from Lian-Li? Will I be okay with those?

@kr00tman

Жыл бұрын

Just make sure they work with your psu and you should be good

That extra 1fps from the OC could be the difference between winning and losing. We all know that win% = fps/3 + no. of rgb fans

@kr00tman

Жыл бұрын

Idk man I was better back on my 3090 then I have been on my 4090 lol

@ggamer7830

Жыл бұрын

@@kr00tman you need to adjust your fan curve. It improves win % massively

I have the 4 plug cable. With the gigabyte RTX 4090. Does the 2 plug corsair cable allow you to overclock? Or no?

@kr00tman

4 ай бұрын

the 600 watt one, I go over that in the video :)

Why do most of these 4090 install videos--always leave out part about connecting to the power supply? I have a power supply with ONE PCIe slot. This slot needs to cover THREE to FOUR connectors from the video card. Is this process in PART 2 of the tutorial?

@kr00tman

Жыл бұрын

What psu do you have and yes there's another video

What happens if I plug it in like this 6:53, does it burn the graphics, or does it shut down, or can it be done but it is not advisable? I am going to buy a 4090, my psu is 850w but only has two 8 Pin cables (6+2) and both cables have that protrusion (not really what it is called) however, if I get to connect it like that will something bad happen?

@kr00tman

Жыл бұрын

Yes you will most likely melt the cable and cause a failure, you should buy a new psu

@AldaOwO

Жыл бұрын

:c

Where to get the custom cables ?

@kr00tman

Жыл бұрын

I would try cable mods website

I've bought a rog strix 4090. I'm using a 1200w rog thor. It came with a 600w gpu cable 16pin on one end and 2 psu plugs on the other. Is that gonna work ok?

@dr.warner2288

10 күн бұрын

(This melting issue has been around for AWHILE I know it doesn't answer your question but more than likely if you bought it from amazon at this point they won't give you a cable that would potentially melt. BUT you can always ask the manufacturer. Sorry I don't know the answer) ;-;

Would you get a 4 prong adapter for 4080 and I rock a 1200 watt psu

@kr00tman

3 ай бұрын

It can't hurt