The level of expertise this guys has is phenomenal. There are tons of KZreadrs generally just short expert. If any component is short they would just fix it. If problem is other than short the gpu is plain dead for them. But this guy has taught me a lot about other problems. His success rate is high. I am sure he would grow a highly rated channel with time.

Hats off to this guy, never seen a board repair like this brilliant, would be the only place for me to send a card if I broke it Bravo sir. you definately need more subs

i have been watching since January when you just started KZread and with around 200 subscribers I'm happy to see how big community you've grown in your channel reaching 2k + subs❤❤

Great , great video , you are number 1 now in all KZreadrs fixing videos , fantastic and thanx

@BanksRacing11

2 жыл бұрын

Absolutely number 1

@energygameplay6513

Жыл бұрын

Northbridge fix is also very good at fixing elecrronics

Beautifully repaired, i'm deeply impressed by your skills, keep up the good work! You amaze me every time again!!

@BanksRacing11

2 жыл бұрын

Same here man I love his work...

cant believe the gulf between this and other youtubers I have watched, truely a craftsman.

@shinokami007

Жыл бұрын

youtube has a lot of content ;)

You repaired my MSI 2080Ti this week, can't wait untill it arives!

@KrisFixGermany

2 жыл бұрын

I hope you enjoy it for a long time

Професионално и прецизно какво винаги. Респект !

Amazing job as always. First time i see fixing the fingers, great job over there as well.

A very, very good job ! Thank you !

Came from Debauars video, man you have some serious skills. What an awesome channel and content, can't wait to watch your backlog and future videos.

Отличное видео и великолепная работа))

Almost like a gamer video Mission: restore power. Difficulty: medium Boss:RTX

awesome work again! nice new camera angle. groovy music with the uv light too.

Keep doing what you're doing. Amazing work!

You are amazing! So impressed from your knowledge and skills!!! Thank you for the pleasure watching your way of fixing that beauty!

Welcome to my life dude! Epic repair!!

Richtig gute Arbeit, Respekt 👍

thank you very much , i love your work 👍

This is not a repair that was art

great video, than you for all the work!

good job Teodor!

great job!

Awesome!

Beautiful job really... MSI will contact you for sponsorship soon i bet on it 😁

amazing as usual!

Amazing Work. Just a master!

great content as always ! keep it up !

excellent 👍

It has also single sides memory chips which makes cooling easier

Thank you Kris for telling us which cards are better. What could be better than a person who fixes 20 cards a day and he tells you what he likes about a card. Usually it is something the owner does which botches a card. But on some something is faulty with the card before they even get the card.

Amazing skills

Very satisfying and educational videos, I look forward to seeing more, thanks for sharing your work and talent.

I can't agree more. MSI and EVGA has the best gpu build/components, even tech cemetry says it. Having multiple fuses is really a plus!

@FFE-js2zp

2 жыл бұрын

It’s impossible to have worse build quality than NVIDIA. 100% of cards are defective out of the box. None can mine full speed without overheating, and fixing the defective cooling is trivially easy. So it’s intentional cost cutting quality failures and planned obsolescence.

@Multimeter1

2 жыл бұрын

The FE cards are built well actually, it’s just bad thermal pads

@FFE-js2zp

2 жыл бұрын

@@Multimeter1 There are some pretty clear quality control issues, too. When you crypto mine with FE cards, bcs they are FHR, you find that every card you fix is a lot different both in performance and subtle physical attributes. I have three different shim fixes I use, and it’s impossible to guess which will work best because the pad depth needed is different every time. There is a way to accommodate any card with a hybrid pad/shim, but it will only reduce temps by 25-30C instead of a best case 40-45C. You also see A LOT of sloppy soldering, which might be the cause of the huge range of performance outcomes among cards operating at the same temperature set.

@sneakymemes573

Жыл бұрын

@@FFE-js2zpI’m glad it’s trash for mining and I’m glad miners buy defective cards 👍

Super 👍

this man is the best on the world!

Now i know which cards to purchase for premium components. Go with MSI gaming X series gpu's

I just found this channel recently, really enjoying the vids! Enjoyable to watch and informative as a modder. I agree about the MSI 3090Ti PCB, great design. I passed up everything else for a Gaming Trio because the board is just so nice and practical. Even with 560W PL via shunt stack, those MPS 70A Power Stages are barely outside their peak efficiency zone!

You are amazing kris ♥♥♥♥

Super

I wish you put the 3 pin removal process in the video as I believe its a very hard and delicate work to be done, I had a blown fuse in some amd card and interestingly nothing was wrong and no issue on thermal camera upon injecting current. Card brought back to life by changing that fuse but I still cant figure out why cause the issue, maybe some high load on mining? God knows.

@BanksRacing11

2 жыл бұрын

Yeah it looks like he actually removed the PCB under the traces somehow cut it lol

@KrisFixGermany

2 жыл бұрын

Probably spikes

@BanksRacing11

2 жыл бұрын

@@KrisFixGermany I appreciate all the videos Kris you've tought me alot you've been a huge help.. I come in every night and check your channel always look forward to another video. Keep up the good work man your undoubtedly the best I've seen on here..

I was hypnotized while watching your health!

nice video👍👍👍👍

Just a (somewhat late) input: absolutely every 3090Ti from every manufacturer (Palit/gainward, asus, msi, giga, evga, zotac, etc) uses the same 16-phase power controller and same 70A power stages from MPS. The only difference may be in the number of the power stages. This is the only occasion that I remember in 10+ years that it does not really matter who made the card, the powering system components are identical across all of the models. Good news for second-hand buyers, I guess - you can literally buy any 3090Ti by its looks and be sure that powering is adequate. NVidia was testing their power delivery system for the upcoming 4090 chip + they made users familiar with the new 12VHP connector, so they mandated powering system as well. Even on 4090 nowadays we can encounter powering that is WORSE compared to 3090Ti - e.g. palit, gigayte eagle.

cool

Great job 👍👍👍 how did you remove the tracks from the spare card and make them so flat?

@KrisFixGermany

2 жыл бұрын

Cnc milling

fantastic work. what silicon did you use under the finger pads?

@KrisFixGermany

2 жыл бұрын

Two component epoxy

Beautiful repair! May i ask what is the grinding tool that you have used to grind soldermask off please?

@BanksRacing11

2 жыл бұрын

I was wondering the same thing myself every tool I've used isn't as precise as I would like and has tool bit wobble.. I've had to repair two 2080 TI's with cracked PCIe's and it took way longer to repair the traces than it should have because of the tool..

@KrisFixGermany

2 жыл бұрын

I think is QianLi

@ShaggySVK

2 жыл бұрын

@@KrisFixGermany Thank you very much! Appreciate the answer! :)

Do you have any plans of doing live streams again? I really enjoyed those

@KrisFixGermany

2 жыл бұрын

I have no such plans at the moment

Hot bunch of technik

This pins did you get it from an old card? Or supplier did you have to cut them out and grind down to thin 1 layer pcb

@KrisFixGermany

2 жыл бұрын

I use cnc milling from the bottom side

@ritzh2908

2 жыл бұрын

@@KrisFixGermany this is something you could show us once 2 very interesting how you do it and if you do it every time special for one purpose or as a bunch of pin

Chris: My 3090ti EVGA card melted at the power connector. The molex itself is no good. I brought to a local fellow to get him to replace the molex...he tried but could NOT even get the solder to melt using his equipment. He mentioned that an oven might need to be used to remove the solder...or find out wha tthe proper solder temps are. Are you familair with removing the power molex on the card and had any troubles??

Funny about the no warranty. That is illegal. Literally, they cannot claim any warranty voidance if the card was opened. It was a long time ago, but laws have changed. Now, companies, will still try and abuse ignorant customers and bullshitting them about this, but people should wake up. In the case of EU customers, there are law protection agencies at work. in the case of US customers there are file a lawsuit. The voidance of the warranty can be done on a defect and not if the product was opened. They must see what doesn't work and if it doesn't work what is the cause, and the weight falls on the manufacturer to prove beyond a reasonable doubt the user interference caused the defect. A mechanical action that did the damage. Not just by opening up.

Hello Kris! Michael here from New Zealand. Have you come across 3090 with 11.9 ohm on FPVDDQ rail? This card has micron ram and had small moisture damage near u17 ic. I am not sure to power card on and try test with mats as I am not sure mats will work with card. Many thanks

@KrisFixGermany

Жыл бұрын

each case is individual, I cannot help you if the card is not here

@michaelkuhn8829

Жыл бұрын

@@KrisFixGermany thank you for the kind response. I will have to try find how to run Mats on 3000 series cards as I don't think my mats can currently support. Card does have all other voltages present so perhaps I might get lucky and one ram ic is pulling down the line. I've fixed many graphics cards already and your videos have helped me so much but am new to 3000 series cards. Thank you so much for all your videos. You are definitely most professional I have seen. And I have listened to your advise about not using too high temp hot air on ram chips.

Amazing expertise. I suppose that's what you get when someone works for the love of their job, not just for the sake of earning money quickly. By the way, what type of glue did you use for the three 12V fingers?

Does RTX 3080 Suprim X has same quality components?

@KrisFixGermany

Жыл бұрын

The components are not the same

@paparazzo80

Жыл бұрын

@@KrisFixGermany yep just checked that this morning..Does it mean that is a bad graphics card and prone to failure? Judging by your vids seems to me we will have more and more rtx 4080/4090 series geting bad...

@paparazzo80

Жыл бұрын

@@KrisFixGermany Bro which card has better components and less likely to fail MSI Suprim X or Palit GameRock both RTX 3080?I wana buy one of them.

@KrisFixGermany

Жыл бұрын

@pcpartpicker FE or Asus

@paparazzo80

Жыл бұрын

@@KrisFixGermany Not selling those here..I must choose between 2 above

U999928 what was the PCB designer guy smoking?

Love that porn music!

...

Why did you Stop explaining what you were doing and started PLAYING MUSIC ?????????

@KrisFixGermany

2 жыл бұрын

There was nothing to explain 🙂

Good job

Hi Kris, thank you so much for your videos and dedication, you are a great help for those who can´t get out of our countrys to study what we love, like me, i have a problem hope you can help me, i have an asus strix 3090 with no video out, it give video when put PEG graphics for the first time, after that nothing, when i run mats it give me the next error: "Found device at domain 0 bus 0 device 2, but its memory cycle enable bit in" and gets in prompt. All the voltages are ok but i got nothing with the scope, in all phases. What should i do? hope you can help me, i really need to fix this graphics card. Thank you so much.

@KrisFixGermany

11 ай бұрын

Mats doesn’t help with 3000 series. Use nvmt

@elgranelectron5387

11 ай бұрын

@@KrisFixGermany Yes i did it and found training errors on channel C with a number 2, according to your videos is C0. thank you so much for your answer, greetings from Argentina!

Very nice video, and great under-bonding technique. I think @retrogamemodz would approve :D