RTX 3060 Ti Undervolt + Power Results

Ғылым және технология

The 3060 Ti can bring some impressive power reductions through under volting, combined with overclocking you can get more performance at lower power. This video shows some scenarios with nice reductions of power consumption vs. stock.
00:00 Intro
00:36 Two types of undervolt curves in MSI Afterburner
02:36 MSI Kombustor (Stress Test & Benchmark tool)
04:37 GPU power results in games
06:05 differences with two undervolt methods under power limited scenarios

Пікірлер: 55

  • @anmolagrawal5358
    @anmolagrawal5358 Жыл бұрын

    The distinction between those 2 undervolt methods was very clear and I see that seldom mentioned in a lot of guides. Thanks for that!

  • @FuriousDevi
    @FuriousDevi11 ай бұрын

    This is not an undervolt! This is an overclock with undervolting! A big difference for people who are only looking for a stable undervolt with lower temps and power consumption.

  • @junaedhossain5521

    @junaedhossain5521

    6 ай бұрын

    can you please suggest a video for lowering power consumption ? tia

  • @S7OVN

    @S7OVN

    5 ай бұрын

    ​@@junaedhossain5521follow all the steps except the memory overcclock

  • @LQsebj

    @LQsebj

    5 ай бұрын

    Undervolt gives you same clock but at lover power which is why u move graph up. Most videos on yt is just an underclock with a spike.

  • @drinkoldcoke
    @drinkoldcoke Жыл бұрын

    Thanks, been looking to undervolt my 30 series !

  • @JudeTheYoutubePoopersubscribe

    @JudeTheYoutubePoopersubscribe

    Жыл бұрын

    Me too, tryna reduce the energy usage of my computer as much as possible while still maintaining the same performance as stock.

  • @nicokru7527
    @nicokru7527 Жыл бұрын

    Thank you, i did my RTX3060ti (zotac) on 1935mhz with 0,900Volt and +500mem clock. And and work super!! Like 65° and stable with more FPS in all Games and Benchmarks.. In Timespy i got 1000points more than stock.

  • @akiyamao3416

    @akiyamao3416

    Жыл бұрын

    I failed😫😫

  • @cne825

    @cne825

    Жыл бұрын

    What do you mean by "0",900? What is the 0? Also, did you do method 1 or 2 to set the new curve?

  • @_highqualitybass

    @_highqualitybass

    11 ай бұрын

    ​@@cne8250,9mv xD

  • @Miklos211

    @Miklos211

    5 ай бұрын

    Are you using a 1080p 60hz or a 1440p 144hz monitor? I'm looking to upgrade to a 1440p 144hz monitor and I'm afraid my 0.950v 1950mhz undervolt might not be enough

  • @albino_6959
    @albino_6959 Жыл бұрын

    i Undervolt my rtx 3060 ti and i see big differents on gpu powe watts. in stock i was geting like 180w at forza horizon 5 and now im geting like 130w but i cant undesten when im not playing my gpu use is 50 watts on youtube but when it was stock it was 20w. why i have this problem ?

  • @RobloxGamer-xh9mc
    @RobloxGamer-xh9mc Жыл бұрын

    Thank you My 3060 ti even got faster after Undervolting and it also uses 50w less power.

  • @Maaatys
    @Maaatys4 ай бұрын

    mine, a 3060 ti vision, undervolt to 1860 mhz for 875 mV, power consumption goes from 200-220w to 130-140w for only a loss of 3-4% performance

  • @FiXANoNada
    @FiXANoNada4 ай бұрын

    Best guide so far. Reached 12000+ in Furmark. Also stable gaming for hours. My temp at max load is at 80 Celsius though. Is that normal?

  • @praisebetoyourCreator
    @praisebetoyourCreator Жыл бұрын

    Hey bro thanks for the video, what If I go for -1000 or more will it work or cause any prob? Thanks

  • @Superior85

    @Superior85

    Жыл бұрын

    negative 1000 for which value?

  • @nawaf_xxkillerxx473
    @nawaf_xxkillerxx473 Жыл бұрын

    hey when I use your prefered undervolt and with this setting 2:13 I get amzing performance boost but is it okay to use will it hurt in the long run?

  • @ExySmexy

    @ExySmexy

    Жыл бұрын

    Nope! Nothing you do in afterburner will affect your gpu health greatly

  • @Tomas91709
    @Tomas9170925 күн бұрын

    Best way to have stable undervolt with low temps is to choose core clock and voltage u want to use for example 875mv at 1875mhz seems stable for me atleast so then u just put core clock all the way down in afterburner then open curve editor select 875mv point and drag it to 1875 mhz then press L and apply. So in the end im using about 50-70w less with around 2-3% performance loss but u can counter that performace loss by overcloking memory to 700mhz and u will get same performance as stock with way lower voltages.

  • @vis-exile
    @vis-exile2 ай бұрын

    I have a Zotac 3060ti, modified into a single fan GPU. Before undervolting the fan was whining at 100% at 75-80°C during gaming, even with a fan curve. Now, it's a tolerable hum at 70% and about 65-70°C during gaming. My settings are: 1900mhz, 900mv, +500mhz Memory Clock, and down to about 120W

  • @jmd6813
    @jmd681311 ай бұрын

    This is the best undervolting video I've ever seen.

  • @Superior85

    @Superior85

    11 ай бұрын

    thank you😊

  • @sercangokalp
    @sercangokalp Жыл бұрын

    Thanks dude 75 to 58 and 206 w to 130 w and that annoying coilwhine is less less leesss now nearly unbearable. I can only hear when I mute the sound and its a thin voice its impossible to hear if you are playing game!

  • @Superior85

    @Superior85

    Жыл бұрын

    great result, glad it helped😊

  • @mikediezel0923
    @mikediezel0923 Жыл бұрын

    I got a stable +160mhz 850mv @ 1875mhz and 900mv @1942mhz. but I lowered it down to only +150mhz to give it more headroom as I heard that overclock and undervolt become slightly less stable after some time. I have an rtx 3060 140w laptop

  • @swiadomosczwiazkowpl

    @swiadomosczwiazkowpl

    Жыл бұрын

    how many watts card need on 850mv?

  • @mikediezel0923

    @mikediezel0923

    Жыл бұрын

    @@swiadomosczwiazkowpl when GPU is being fully utilized it uses around 115watts

  • @swiadomosczwiazkowpl

    @swiadomosczwiazkowpl

    Жыл бұрын

    @@mikediezel0923 Good. Somewhat like 1660 super without undervolt

  • @DragonVII
    @DragonVII11 ай бұрын

    Is this safe bro ? Not gone happend any issue to the gpu hardware? Later on !

  • @Superior85

    @Superior85

    11 ай бұрын

    i would say its safe, i have done this for years on other cards with no issues. the worst thing i've seen is crashing if i set the values too high, but that can be fixed by lowering the values...

  • @-Ghostface

    @-Ghostface

    11 ай бұрын

    Even without changing the Power/Temp Limit you can still achieve good results with +750 mem. Reducing the peak temp with slightly better performance and prolonging the life of your card regardless. Definitely worth the trouble

  • @4nomaIy
    @4nomaIy11 ай бұрын

    can I increase power limit without increasing ram speed?

  • @Superior85

    @Superior85

    11 ай бұрын

    yes

  • @4nomaIy

    @4nomaIy

    11 ай бұрын

    @@Superior85 thanks

  • @AnruElCreador
    @AnruElCreador Жыл бұрын

    This work for 3060 standard?

  • @Superior85

    @Superior85

    Жыл бұрын

    yes, the standard 3060 can be undervolted as well.

  • @karmapolice7231

    @karmapolice7231

    2 ай бұрын

    ​@@Superior85for some reason I'm getting the feeling when under/overclocking the card say from 220w down to 130w i don't think it will be strong enough to run 1440p 60fps plus med/high settings.

  • @karmapolice7231

    @karmapolice7231

    2 ай бұрын

    Because it will need the extra power

  • @karmapolice7231

    @karmapolice7231

    2 ай бұрын

    Ima just leave mine the way it is I've it overclocked 150+ on core and power raised to 110%

  • @karmapolice7231

    @karmapolice7231

    2 ай бұрын

    My card rarely hits 73c

  • @finestrix7944
    @finestrix79446 ай бұрын

    I did +235 on core and +700 on memory

  • @koofyman7249
    @koofyman7249 Жыл бұрын

    thank you from 70c to 58c and 220 watt to 130watt and no more coilwhine :D

  • @gopaulboodraj

    @gopaulboodraj

    Жыл бұрын

    Wow, nice! What frequency (MHz) and Voltage (mV) did you set on the curve?

  • @koofyman7249

    @koofyman7249

    Жыл бұрын

    @@gopaulboodraj 1920mhz and 906mv

  • @Ladioz

    @Ladioz

    Жыл бұрын

    @@koofyman7249 that 1920mhz and 906mv works well in games but seems to crash heaven benchmark for some reason

  • @dominikli2132
    @dominikli213211 ай бұрын

    not working game crashed throttling yt :/ my card gainward 3060 ti ghost 8GB

  • @karmapolice7231

    @karmapolice7231

    2 ай бұрын

    Don't do it your literally taking half of ur gpu away from itself when it needs it

  • @karmapolice7231

    @karmapolice7231

    2 ай бұрын

    3060ti founders edition runs hot anyway its normal, mine rarely hits 73c mainly under 66c

  • @karmapolice7231

    @karmapolice7231

    2 ай бұрын

    And I've it overclocked lol 150+ on core and power raised to 110%

  • @TheSazansavar
    @TheSazansavar10 ай бұрын

    idle voltages way too high it increases power usage when idle significantly. Not ideal.

  • @strikelight3936

    @strikelight3936

    8 ай бұрын

    you're right. but gamers here don't understand you :D

  • @ek1582

    @ek1582

    4 ай бұрын

    What about having two profiles: default for idle/low workload and another one undervolted for gaming? Or too much hassle cuz it cannot be automated?

  • @metalhead3568
    @metalhead35689 ай бұрын

    most confusing tutorial of all time jesus

Келесі