RS3M 2020 vs Meilong 3M | Cube Comparison
Ойын-сауық
Heres a comparison between the rs3m 2020 and the meilong 3m. Hopefully this video helps you decide which cube is the better fit for you!
Buy these cubes here:
rs3m 2020: www.thecubicle.com/products/m...
Meilong 3M: www.thecubicle.com/products/m...
Background music:
Lakey inspired - Chill day : • LAKEY INSPIRED - Chill...
Outro music:
Lakey Inspired - Arcade : • LAKEY INSPIRED - Arcade
Also follow me on Instagram!
Instagram: / kadthecuber
Unboxing of the Meilong 3M + Rs3M 2020 :
• RS3M 2020 + Meilong 3M...
Пікірлер: 64
1:20 You have the text mixed up!
@kadthecuber
4 жыл бұрын
anv3D ye I found out too😩
The quality of your videos are very good you deserve more subs
I love your videos, and I can see that you have a lot of potential. The quality of your videos is amazing, however, it could be improved. 0:54 The presence of these shadows somewhat hurts the quality. I'm not entirely sure what causes this, but I'm sure it can be fixed. 3:48, This shot is really nice, but the background is kinda unattractive. Maybe you could experiment with different backgrounds or you could record some nice shots outside. Your content is great, and I hope your channel takes off in the future :)
This is the video that made me subscribe to your channel and buy my RS3M 🙃
I have a Meilong and wanted to get the RS3M. I think ill hold on to my Meilong...
There are many reasons to use either one of these cubes, I am torn between maining the Meilong m or the rs3m 2020. I think the biggest downside of the Meilong is the m slices, they are the worst part of the cube, while not being bad by a long shot, I find the rs3m 2020 to be a lot better with slice moves, that might be why I main the rs3m 2020, but I still might main either one of these.
I liked the vid and comparison
Omg, Just discovered your channel, amazing content and video quality, also, what do you use for making your thumbnails?
@kadthecuber
4 жыл бұрын
The YoGeek Cuber it’s an app called photo. I think it’s only available on iPad... idk. But it’s very similar to photoshop
Could you do a comparison between the wrm and rs3m 2020?
What editing software do you use
which cuber is heavier?
You make amazing content
@prajnaparamitamahapatra2556
3 жыл бұрын
Just like u
So which is better?
Hello, what are the main differences that made you prefer the rs3m over the wrm? Nice video btw
@kadthecuber
4 жыл бұрын
Ihsan Rosmadi Both the wrm and rs3m are my mains. I think their both equally as good. The wrm has better corner cutting and the rs3m is more stable
Take a shot everytime u hear him smacc his lips
@BiffHorrific
4 жыл бұрын
🤪 wasted! 🥃
@sirtoddles8305
3 жыл бұрын
That’s imposible
Bro kad please answer this question wut editng software do you use And how do you make your videos with so much quality
@kadthecuber
4 жыл бұрын
Cubing Gen I use premiere pro.
@CubingGen
4 жыл бұрын
@@kadthecuber is it only available on laptops or also in a tablet
@nottrottyy5330
4 жыл бұрын
@@CubingGen Laptop.
@CubingGen
4 жыл бұрын
@@nottrottyy5330 ok
Try lubing the 3m with v1 v2 v3 moyu lube
I bought these two cubes at the same time. I first tried RS3M 2020 and liked it than my previous main: QiYi MS. But then I tried MeiLong 3M. My, it was very light. Weight-wise and turning wise. I liked it so much, I changed the spring compression of the RS3M 2020 to mimic the MeiLong but alas it was still much heavier and the magnet strength is a bit on weaker side for that weight. I liked both but MeiLong 3M is simply match my preference better without all those adjustment bells and whistles. It is also the quietest making it the best cube to bring when solving in public.
sub number 667! awesome content
I have already ordered the Rs3m 2020
what i thought u have over like 10k subs then i watched and only 275???? what
i like my 3M. just gave it a deep clean and expecting some cosmic lube to come in
Oh no I bought the Meilong 3m is this cube still good for a main?
@Koerkaore
2 жыл бұрын
Meilong is way cheaper idk why we are even comparing it
@jstarandomdude
Жыл бұрын
meilong is better than rs3m, cheaper, basically the same corner cutting, both made by MoYu (idk why this is even a factor)
Do they both have logos that are permanent?
@kadthecuber
Жыл бұрын
No you can take them off👍😁
Hi. How can I get that lupe?
@kadthecuber
Жыл бұрын
traxxas 50k can be bought on the cubicle, but the one that I got in a bottle, I probably got from amazon
for me i like the mielong a lot more
Cubes cheap af here in the Philippines. Like i literally saw a gan 356RS for 50% off and its got a lot of good ratings Edit:it costs 13dollars from 27usd to 13usd Edit2: just found out it was the gan official store in the Philippines
how many click did u use
@kadthecuber
4 жыл бұрын
Ean TV 5
i think i'll buy the meilong because i can't find the other one in my country :(
@kilist174
3 жыл бұрын
How? Not on anything like for example Aliexpress?
I just wished to see some sample solves in each one! 😭
Qiyi Ms?
@pakun0019
3 жыл бұрын
It's good but really really loud
nice one, i also made a comparison vid lol
You got the 2 cubes mixed up at 1:25
@tutoriaismobile4975
3 жыл бұрын
Umm, yes
bro melong 3m is best
Me and my gan11 m pro
I just put it on the highest setting to be slower
@littlebigcubing6062
4 жыл бұрын
CubeBricks I prefer the setting 5, not to slow, not to fast to where the magnets don’t help with controlling the puzzle.
@_NewMoney0
4 жыл бұрын
@@littlebigcubing6062 I tightened my cube not top tight then I just put it on 5
Youre like j perm
i bought the Meilong 3M for 4 dollars here in Philippines
@ivanwong1452
3 жыл бұрын
I also in Malaysia
@sodiumzirconium6291
3 жыл бұрын
kumusta kuys? ano ma irecommend mo Meilong 3 M or Rsm3 2020? thanks!
@user-wo4vo5nz8e
3 жыл бұрын
@@sodiumzirconium6291 I dont have the R3SM but for me The 3M is a really good cube.
@sodiumzirconium6291
3 жыл бұрын
@@user-wo4vo5nz8e thankyouuu, how the magnet? did you change it or add magnets?
@user-wo4vo5nz8e
3 жыл бұрын
@@sodiumzirconium6291 I didnt do anything in the magnet but its pretty good. It have tension adjustment system.