It's here! In this episode of Twin Turbo Tuesday, the prep work is complete and it's time both the turbos got fitted to Ian's P38.
Жүктеу.....
Пікірлер: 7
@andyhoffman24753 жыл бұрын
Spoolie spoolie!
@psworks66033 жыл бұрын
Immense work!
@RPIEngineering
3 жыл бұрын
Thank you.
@2510RANGE3 жыл бұрын
Turbo and LPG :D
@RPIEngineering
3 жыл бұрын
Yep :-)
@Predator270073 жыл бұрын
Can I ask why forced induction as opposed to, say, a 5.2/5.4 normally aspirated unit? I have a friend with a 5.4, Omex, Bosch injectors and MAF. With a mild cam he saw 370/410 on a rolling road. Obviously, some large costs associated.
@RPIEngineering
3 жыл бұрын
Hi Nigel, Nice to go down a different route. I have also seen 5.0 litre engines through the Thor intake setups still only make 260bhp (obviously a bit better tore though). Of course I could switch the intake to a more conventional Gems setup for better flow however decided to take a different approach, play with some boost and see where it takes me. I believe a forged 4.6 build with good flowing heads and the right boost setup is a 600bhp figure (there are a few out there) so may end up there but at some point I think I have to think about the vehicle I put that engine in as the P38 might not be the right platform, but we will have to see :-)
Пікірлер: 7
Spoolie spoolie!
Immense work!
@RPIEngineering
3 жыл бұрын
Thank you.
Turbo and LPG :D
@RPIEngineering
3 жыл бұрын
Yep :-)
Can I ask why forced induction as opposed to, say, a 5.2/5.4 normally aspirated unit? I have a friend with a 5.4, Omex, Bosch injectors and MAF. With a mild cam he saw 370/410 on a rolling road. Obviously, some large costs associated.
@RPIEngineering
3 жыл бұрын
Hi Nigel, Nice to go down a different route. I have also seen 5.0 litre engines through the Thor intake setups still only make 260bhp (obviously a bit better tore though). Of course I could switch the intake to a more conventional Gems setup for better flow however decided to take a different approach, play with some boost and see where it takes me. I believe a forged 4.6 build with good flowing heads and the right boost setup is a 600bhp figure (there are a few out there) so may end up there but at some point I think I have to think about the vehicle I put that engine in as the P38 might not be the right platform, but we will have to see :-)