Top job and well done this has to be one of the "must do" mods on the SM650.

Thanks for a great tutorial video it gives me the confidence to go ahead with mine👏👍

Very good work my friend! Huges from Brazil

Thanks for sharing, very well explained.

@SlowRiderCZ

28 күн бұрын

Thank you!

Nicely done sir. You beat me to it😂 I love your idea disconnecting the rear shocks to remove and replace the wheel! Could I borrow a clip of your video for my video? 😂🙏

@SlowRiderCZ

2 ай бұрын

Hi! Thanks for the comment. Feel free to use whatever you find useful... David.

Looks like a great upgrade. I will do the same if I purchase the RE SM 650.

@SlowRiderCZ

28 күн бұрын

I would totally recommend it!!

thanks for sharing , It takes time but it seems that it can be installed without a garage. Looks really good and clean

@SlowRiderCZ

2 ай бұрын

Daniel, thanks for the comment. You need to have tools (torque wrench is a must) available, blue locktite and some space. Basic experience with motorbike mechanics is also highly recommended. I am no expert, I was used to do the motorbike maintenance myself, and this was pretty straight forward - the instructions that come with the kit have been updated since my installation based on observations and comments from users - so I believe it´s really doable in home conditions.

@yossidaniel76

2 ай бұрын

@@SlowRiderCZ Thanks for the response, yes a rider must have a minimum of knowledge, a torque wrench is a must!! The most fun is working on the motorcycle you take care of.

@jetsetter_Awara

2 ай бұрын

Hello Informative What about the price?

super

There is no need to remove the swing arm or take the wheel completely out from under the mudguard the pulley will fit on ok and the chain if twisted through 90 degrees comes past the the swing arm pivots

Hi a question... But after installed the belt drive kit do you need retensioned the belt or after installation you dont need retensioned? I think that evry check in italia 7500km to check the belt. Tnx

i installed a regina hpe endurance chain and did 0 adjusting for 19'000km, cleaned her twice and lubed her 4 times, all done in 6months

@SlowRiderCZ

2 ай бұрын

Wow, that´s impressive!! It´s good to know there are other alternatives! (not for me any more, but for the others that seek inspiration here). Thanks!

@benjamin.f.b.

2 ай бұрын

@@SlowRiderCZ the regina HPE chain crossed the czech republic yesterday, starting in Železná Ruda and left northwards around Chomutov. Now with slightly 20k use, still 0 adjusting, checked every link, all perfect. The chain cost me ~ 300 euro and i was not allowed to use aluminium sprockets, the sprockets are also 20k km on, and still good 🧐

@jainybadu5707

2 ай бұрын

Very good information.i am from India, how to get if I too change chain version to belt version. Let me share how to place order from INDIA.

👍

The YSS rear shocks looks interesting, are they 360mm long? Could you please post the model number of the shocks, the ones you have installed do come in different sizes. However, I like the modifications on your bike, the belt drive as well. Thank you for your spirit in biking, and every thing that you have demonstrated is a great help to all the fellow bikers, much appreciated. Thank you

@SlowRiderCZ

28 күн бұрын

You´re welcome!!

Thank you very much for this very helpful video 🙂 I have also bought this same belt drive kit from RSTech for my Super Meteor. I am still working up the courage to fit my one 😳 Do you think it would be a good idea to get myself a special jack to raise the height of my bike a bit more to made removing the rear wheel a little easier?

@SlowRiderCZ

2 ай бұрын

Hi Felix! Thank you for your comment! I think it is doable even without the jack, but if you have one, it would definitely make things easier, not only removing the wheel, but also testing the belt on the pulley once installed...I decided not to purchase one as this is one time project...

Great job done. Do you think it could be done on the Himalayan 411 ?

@SlowRiderCZ

2 ай бұрын

This kit is specifically made for Super Meteor. Try contacting the manufacturer: rstech.my-online.store/page/contact-us

@hansbachtold1966

2 ай бұрын

@@SlowRiderCZ many thanks for your reply.

Got this installed on my SM 650......the ride is now super smooth, that mechanical rawness delivering the final drive to the wheels via the chain is now not there......the chain snap and jerk in some cases is not there anymore....smooth acceleration....

@luckychouhan-ew6lh

2 ай бұрын

Hi, is it available in India? if yes then how much?

@ssdravidian

2 ай бұрын

@@luckychouhan-ew6lh not available in India, imported from Thailand...

@SlowRiderCZ

28 күн бұрын

Exactly my experience! Thanks for the comment!!!

@pratik66480

25 күн бұрын

How much did it cost you??

Ahoj ,díky za pěkné video. Také jsem o tom řemenu přemýšlel, ale zatím mám najeto něco přes 6000km a ještě na dorazu napnutí řetězu nejsem tak uvidím. Jen mě napadlo, jestli to projde STK, neviděl jsem kryt na řěmen, neměl by tam být?

@SlowRiderCZ

2 ай бұрын

Na STK půjdu v roce 2029... do té doby... :-)

Why did you not split the chain

@SlowRiderCZ

28 күн бұрын

There is no connecting part as far as I´ve noticed. I´d have to cut it with a grinder - and that´s something I did not want to mess with. Recent reviews say, that if you disconnect rear shock and drop the swing arm, you can take it out without having to remove the spindle. That´s good news!!

Do u get a whirring sound from the front when u accelerate ?

@SlowRiderCZ

28 күн бұрын

No, I have not noticed anything suspicious. I have a DNA air filter and perfromance exhaust installed though, so the bike can be a bit louder...

Ahoj, zajímavé video, jsem též majitelem Super Meteora 650 a zvažuji výměnu řetězu za řemen. Kolik km jsi již ujel s řemenovým pohonem a jaké jsou Tvé zkušenosti, poznatky?

@SlowRiderCZ

28 күн бұрын

Ahoj, aktuálně s tím mám najeto něco přes 2000 km - a v podstatě jak si na to zvykneš, tak žádné nové poznatky nepřibývají. Vše zatím funguje, nemusel jsem nic mazat - takže za mě spokojenost.

Very interesting video ... What tipe of gear do you have? Original o 38 t? Which are the principal difference after belt drive? I want to bay also me the kit of the Robert. Do you like give me your e mail for speak of super Meteor... Also me have balck sm. Tnx and have a good day

@SlowRiderCZ

2 ай бұрын

Hi! Thank you, good question. I have the higher ratio version. It´s noticeably better in higher speeds, while still OK in slow ones. Biggest difference was already mentioned: smoothness of ride, it´s quieter and most of all - MUCH less maintenance...

@erikmartin6475

2 ай бұрын

​@@SlowRiderCZ Fantastic!!! I think that installing gear stock. Another question... to install the belt it is possible only remove the rear wheel and disconnect the shocks to not remouve the rear arm? TNX