Thanks Ben for updating. Actually I wait for your Blog. Full of knowledge and no extra words. Salute to your knowledge and I do respect your attitude. You are a great person........thanks again dear.

@ONTWOWHEELSBEN

4 жыл бұрын

thanks a lot again Arnab . will continue to make more meaningful content .

You channel is nothing but a 💯 % guidebook. If it’s watched properly then chance of going wrong is 0% . I guess you are The #Best #KZreadr I watched till now . Every second in your blog has a technical reason. So I always recheck what’s new in your channel ... pls educating us. Really thanks for your blogs .. I don’t skip even a single second in all your blogs ..

@ONTWOWHEELSBEN

4 жыл бұрын

thanks a lot for taking the time to appreciate and acknowledge my work dear friend. these words just made my day . will continue to engage all of you with more information that i have gathered over the years . thanks again .

@dheerajbshetty9129

4 жыл бұрын

This s just a 0.0001% I did . Your info about Tiny tiny things are amazing. I have never seen someone explaining about even a screw . This type of blogs are my favourite. So I’ll be the person who will watch again and again. Travel blogs most of them make but #Technicalblogs few . In that I found your channel as amazing.

@rahulnair4948

4 жыл бұрын

@@ONTWOWHEELSBEN bro where u did modify this all

@ONTWOWHEELSBEN

4 жыл бұрын

Rahul Nair I do everything myself friend . Kindly watch other videos on my channel to know more about my work .

@rahulnair4948

4 жыл бұрын

@@ONTWOWHEELSBEN where u from

Thanks you so much for your prompt response. I was thinking about BS auto and AOM handlebars. This seems more prudent now. Appreciate your help.

That handlebar risers is the best of the lot. Thanks man

I got my Royal Enfield Himalayan bs6 gravel grey this month....now from this channel I know what all I can extract from it.... thank you....🙌

@ONTWOWHEELSBEN

4 жыл бұрын

Pavan R thanks friend

Hi Ben, your videos are super informative. Quick check on the to-do's to have the clutch with a free play. I saw you pulling and releasing the clutch and heard a sweet snap. PS: Just picked up a BS6 Himalayan a couple of weeks back.

@ONTWOWHEELSBEN

4 жыл бұрын

pls watch this video Rinu kzread.info/dash/bejne/jJ6l2aZ6otTKcqQ.html

Bought the same for replacing the stock thinking it would fit perectly (apart from Grinding the wahser of the riser )but its not I had to drill the holes and made modification because the hole that came is not fit for Himalayan. Note- this ktm handlebar s shorter than the Himalaya one. I've compared & measured .

Do you need to change the acce cabel or any cabel for the riser ??

Very Unique and one of the Best Video I was Looking for it.

@ONTWOWHEELSBEN

4 жыл бұрын

Ajit Sahani thanks friend . Hope it helps

One more good informative video, Thanks Bro for the knowledge share...about Himalayan, you should have added Wind shield extender details to this..and BTW where do we get that extender and is it a good quality one? And how does it costs us..? And what about a dedicated video about changer installation on bike when start it not the continuous one without turning on the bike engine

@ONTWOWHEELSBEN

4 жыл бұрын

subramanyam thommandru hi Friend . You can order the wind deflector for motorcycles from amazon . Also I will make a video on wiring additional accessories to the ignition system soon .

@subramanyamthommandruhome

4 жыл бұрын

@@ONTWOWHEELSBEN thank you bro

Videos r getting better and better 👍😊 quality content

@ONTWOWHEELSBEN

4 жыл бұрын

thanks friend

Ben I just think even a guy of 5'6" like me needs a handlebar riser for long rides because when I ride my friends Himalayaan I was bending forward a bit which was good in twisty mountain roads but sometimes I feel like I can use a taller handlebar or a rised handlebar. My question is how does the ktm handlebar feel in twisty mountain roads?

So much informative. Love from Mumbai ❤️

@ONTWOWHEELSBEN

4 жыл бұрын

thanks friend

Ben.. Fantastic Videos..!!You and TFT are the Chennai boys to watch regarding the Himmi..!!

@ONTWOWHEELSBEN

3 жыл бұрын

Thank you 🙏

Good video Ben. Thank you. What you may want to consider for your non-India market is your interchanging "bucks" and rupees. When you say you paid 1400 bucks for a switch, your American market equates that to $1400 USD, not 1400 rupees.

@ONTWOWHEELSBEN

4 жыл бұрын

Joe Garrison I am terribly sorry for borrowing your colloquial terms Joe . It’s how we learn English here a bit of UK and a bit of USA and it is funny how it leaves a lasting impression on us that we become totally oblivious of our mistakes .

@joegarrison8611

4 жыл бұрын

@@ONTWOWHEELSBEN No apologies are necessary Ben, I realize it is a simple mistake and I am sure I would do the same in Hindi. Cheers!

Really loved the knuckle guards

@ONTWOWHEELSBEN

4 жыл бұрын

thanks friend

How is the cliff top socket working? Did you ride in heavy rains? Bikenbiker doesn't have that anymore so is it OK to get from Amazon the one which has 2 usb ports and Cigratte socket?

Very very good 👍🌹

Ben the link you have provided for the handguards are not working

Hi Ben. Thanks for the video. I was trying to source the Duke 390 handlebar (in mumbai) but couldn't as it is out of stock with all the service centers. None of the are sure on the return. Hence, wanted to check if it is available through any other channels. Please let me know

Hi Ben once again.... Can you make a video on garmin usage and compared with an mobile GPS apps (also open street maps is also available on androids and ios) Is it really worth to buy expensive GPS system in India 🇮🇳 ? ... Also most of the good navigation systems not available in for purchases. So a cheap or old phones with apps can be used nowadays.. Though garmin systems are reliable in Western countries and also ruggedly built.. Is it still valuable compared to the current phones which does the pretty same job.....

Hi Ben, I have installed AOM handlebar on my Himalayan 2022. However it has increased the vibration post 3000 rpm. This was not the case in stock handlebar. I have checked all the bolts and it's fixed accurately. One of the mechanic suggested to add the stock handle weight with the stock knuckle guard which I had installed. Will it help?

@ONTWOWHEELSBEN

2 жыл бұрын

Yes it will 100%

Hi Ben sorry for disturbing again I read a comment from this video. I that u replied that while installing the ktm handlebar (u have to make pin holes for the switch console slightly bigger by drilling) this is what I can't understand where we have to make pin holes for the switch console. Sorry I am continuously asking u my queries so sorry for that Ben. I hope u must be not angry on me. Waiting for yours reply 🙏🙇‍♂️.

@ONTWOWHEELSBEN

4 жыл бұрын

open your switch console and see for yourself Yash . you will find a small metal projection in the upper half of the console that goes inside a hole in the handlebar to lock it in place . the same holes on the ktm handlebars are slightly smaller in dia . so you will have to drill them out to accomodate the pin on your stock switch console

It would be great help , you could give brief descriptions and with links so we can look into that and buy it

@ONTWOWHEELSBEN

4 жыл бұрын

naveen kumar Hi Naveen . Have included the link to the mirrors in the description. Kindly check

Does the KTM handle bar fit in the stock mount of Himalayan ?

@ONTWOWHEELSBEN

3 жыл бұрын

I believe no . You might have to do some grinding to make the perch wider

Do we need to get the bar ends with this handlebar or the stock one fits?

@ONTWOWHEELSBEN

Жыл бұрын

Stock ones will not fit

What is the height obtained from the handlebar risers?

@ONTWOWHEELSBEN

3 жыл бұрын

2.5inches.

Are the stock cables long enough for the taller handlebars?

@ONTWOWHEELSBEN

4 жыл бұрын

Mike K yes up to 2 inches . Not more . Also keep in mind that if you use a wider handlebar than stock , the risers may not clear the clutch cable .

@ONTWOWHEELSBEN

4 жыл бұрын

Mike K I so sorry mike . I didn’t read your msg properly. This KTM handle bar is not tall compared to the stock one . But adding risers sure makes it 2” more taller .

@mikek2218

4 жыл бұрын

@@ONTWOWHEELSBEN Thank you sir for the reply. I'm going to consider that handlebar.

Hi ben, for this handlebar setup did you change the clutch cable assembly. Coz it is increased by few cms in length so the stock himalayan clutch cable is short for the duke handlebar. Kindly suggest, how to go about the fitting process. Thank you

@ONTWOWHEELSBEN

2 жыл бұрын

it is the stock clutch cable routed slightly to suit the new RISE .

@udaynm369

2 жыл бұрын

@@ONTWOWHEELSBEN Thank you

@udaynm369

2 жыл бұрын

I couldn't find those details in the video, can you suggest me how to go about it

Hi Ben, so it's my dad who got a Himalayan for highway touring 80% of the time. With close to 1000km clocked so far, he wishes the handle to be a little nearer to him. He is 5'4" and also has a shorter upper body. He has tilt the handle bar angle a little to come a little closer to him just before the elbow bending inward limit. That has made a world of difference but he is not yet relaxed for longer rides( He wishes to have a little more nearer reach). With the knowledge you have, what can I ask him to do/consider? Thanks.

@ONTWOWHEELSBEN

2 жыл бұрын

amzn.to/3kaJZH1

@ONTWOWHEELSBEN

2 жыл бұрын

that should do it.

@swastikrout6656

2 жыл бұрын

@@ONTWOWHEELSBEN But that would increase the height too isn't it. Like I said, he is short and also has a shorter upper body. Any different handle bar for nearer reach than stock that you have an idea about? Because I can still chart out that a riser as much as good would be, is bad since the bar being tilted to the extreme(shorter upper body) is going to hurt the good ride feel and confidence.

Thank you for making this informative video.

@ONTWOWHEELSBEN

4 жыл бұрын

thanks william

@OneNomadMan

4 жыл бұрын

Great Informative video , OneNomadMan has subscribed 👍👍

@ONTWOWHEELSBEN

4 жыл бұрын

@@OneNomadMan thank you friend.

@OneNomadMan

4 жыл бұрын

@@ONTWOWHEELSBEN Welcome mate

is this knuckle guard touching wind shield after change handle bar?

@ONTWOWHEELSBEN

3 жыл бұрын

no.

@travelhobia

3 жыл бұрын

How much this handle bar price?

Hi Ben, which KTM handle bar? Is this handle universal for both 200 & 390 ?Great set up of the handle bar on your bike..... 👍🏻

@ONTWOWHEELSBEN

3 жыл бұрын

Hi friend . It’s from a duke 390 2018 edition

@zian7099

3 жыл бұрын

@@ONTWOWHEELSBEN thanks a ton

Bro.. hand guard ki link fir se share kare please.. description me di link show nahi kr rha hai..

@ONTWOWHEELSBEN

3 жыл бұрын

bandidospitstop.com/collections/hand-guard/products/exclusive-mx-hand-guard-for-motorcycle

Thanks Ben for your informative videos. Recently someone dashed n dropped my Sleeth in parking. The enduro handlebar got bend a bit. I am planning to go for AOM or KTM handlebar like yours. I have few simple questions. Will the stock cables be fine for KTM + risers ? Will the stock RE bar end weights work ? How is the city commute with this handlebar ?

@ONTWOWHEELSBEN

4 жыл бұрын

hi friend . the stock cables will work just fine even with 2 inch risers. but be aware that the ktm doesnt fit the stock perch . you will need a riser kit that allows for a fatter handlebar to sit comfortably. the city commute is far better than the stock handle bar

@ragsbava

4 жыл бұрын

@@ONTWOWHEELSBEN Thanks for the quick reply 😁 and the heads-up on the perch situation !! Will search in the local market if not available then will order these Electromania ones that u shared.

Ben ..changed my handle bar to the AOM bar...found it very vibey over 100..!!Quick question do you think changing the bar end weights would make a difference.

@ONTWOWHEELSBEN

3 жыл бұрын

Yes definitely.

@deepakjose5756

3 жыл бұрын

@@ONTWOWHEELSBEN ..any recommendations for the bar end weights..iam using the stock obes as of now

@ONTWOWHEELSBEN

3 жыл бұрын

@@deepakjose5756 they are the heaviest in the market . So the only solution to the vibes is get a heavier handlebar or drill out the threaded insert at the end of the handlebar and use a piston style bar end weight ( the ones that used to come with rubber dampeners and long metal rods ) .

@deepakjose5756

3 жыл бұрын

@@ONTWOWHEELSBEN Ah that means the Duke setup which you detailed..Will do and if ever you are in Bangalore do get in touch..would love to raise a glass with you..!

@ONTWOWHEELSBEN

3 жыл бұрын

@@deepakjose5756 sure friend.

Sie can u please send me the side mirrors link..

@ONTWOWHEELSBEN

3 жыл бұрын

Arunachal Man pls search for doubletake adventure mirrors online

what size are the handlebars? are they 7/8"?

@ONTWOWHEELSBEN

3 жыл бұрын

1 inch in the middle and tapers to 7/8

A weaker handlebar can protect your stem from getting damaged in a fall?

@ONTWOWHEELSBEN

3 жыл бұрын

No friend.

Nuckle guard brand ?

@ONTWOWHEELSBEN

4 жыл бұрын

its a generic one . not branded. you will find it on bandidospitstop.com

Is it possible to get these handlebar on Continental gt 650...any suggestions.

@ONTWOWHEELSBEN

4 жыл бұрын

Raymond Lepcha it will not fit the stock perch because it’s slightly wide . You will need handlebar risers for the same and that will kill the cafe look of the GT . So I don’t recommend it .

Hi.. himalayan bs6 is good bike.. build quality.. engine.. oil leakage.. problem? Can you suggest me to take it or not

@ONTWOWHEELSBEN

4 жыл бұрын

hi friend , the engine and design is good . decent quality of components too but you will have to learn to maintain it otherwise things will go wrong sooner than expected . it is definitely not a ride and forget bike. regular checks and home maintenance is key .

Is there any need of modification on the KTM handlebar to fit on the Himalayan

@ONTWOWHEELSBEN

3 жыл бұрын

suhen barcheg you will need a set of handlebar risers that allow for a 1” handlebar. This will not sit in the stock perch

Ben u hav handle bar risers installed on ur bike was there a need to replace the stalk clutch cable with the longer thunderbird cable

@ONTWOWHEELSBEN

4 жыл бұрын

Solomon Alexander no friend . The stock cables are good for 2” risers and not more .

@solomonalexander4581

4 жыл бұрын

ON TWO WHEELS BEN thanx bro for the information a big fan of ur work I almost hav all the mods on my Himalyan now planing for the RK chain sprocket keep the good work going 👍🏽😊

@ONTWOWHEELSBEN

4 жыл бұрын

Solomon Alexander Thanks Friend.

Hi, as someone who is 6'5'', what kind of handlebar rises do you recommend?

@ONTWOWHEELSBEN

3 жыл бұрын

Taller seats , more viscous fork oil, increase preload , and 2.5 inch pivot able Rox risers .

nice setup, witch ktm model handlebar?

@ONTWOWHEELSBEN

4 жыл бұрын

ktm 390 2017

the video was so informative but have u bought the double take mirrors for 12k?

@ONTWOWHEELSBEN

3 жыл бұрын

thanks and yes.

@saineeraj2163

3 жыл бұрын

@@ONTWOWHEELSBEN can I get ur insta Id ?

@ONTWOWHEELSBEN

3 жыл бұрын

@@saineeraj2163 same name friend

Hey i need those hand / knuckle guard. Could you please help.

@ONTWOWHEELSBEN

4 жыл бұрын

Ghumakkad Monk hi it’s available on bandidospitstop.com

How much cost to you adv mirror?

@ONTWOWHEELSBEN

2 жыл бұрын

pls google doubletake adventure mirrors brother.

Somehow the handle knuckle guards are irritating while touring...

How much uh paid for doubletake???

@ONTWOWHEELSBEN

3 жыл бұрын

Including anti theft locks 16000

Can you explain about your GPS system!!!

@ONTWOWHEELSBEN

4 жыл бұрын

its a garmin nuvi 205 . purchased from england.

👍👍👍

Great video again..but is it ktm 390 adventure handle bar ?? Where can we get it and is it plug and play ??

@ONTWOWHEELSBEN

4 жыл бұрын

Shiv Prasad yes it’s a 2017 390 handlebar . Buy it from the dealership or service centre and also yes it is a clean swap . Just make the pin holes for the switch console slightly bigger by drilling.

@boredbanda3168

3 жыл бұрын

@@ONTWOWHEELSBEN drilling is needed? Does it voids warranty? One more thing this handlebar and re Himalayan touring handle bar which will be better?

@ONTWOWHEELSBEN

3 жыл бұрын

@@boredbanda3168 you will have to increase the diameter of the holes in the handlebar by a millimetre. Also this is any given day a better touring friendly handlebar than the RE enduro handlebar ( RE is not a touring handlebar ) .

@boredbanda3168

3 жыл бұрын

@@ONTWOWHEELSBEN thanks for prompt reply.. I am planning a tour in very hilly areas with very bad roads hence the question. One more thing it's the ktm 390 adventure handlebar right? Can you tell the price?

@ONTWOWHEELSBEN

3 жыл бұрын

@@boredbanda3168 this is the Duke 390 ‘s handlebar . 1500 Rs

Hello sir, I am 5'6 should I go for it? Also between this and art of motorcycle handlebar which one do you suggest for my height?

@ONTWOWHEELSBEN

3 жыл бұрын

This is not a high handlebar. Combined with the risers it is . AOM handlebar is a high rise handlebar . You will find that better .

@boredbanda3168

3 жыл бұрын

@@ONTWOWHEELSBENThanks for prompt reply sir, so with 5'6 raised bar (AOM) is better? I need comfort for long distance and stock one is bit forward bending which causes wrist pain even on short city rides.

@ONTWOWHEELSBEN

3 жыл бұрын

@@boredbanda3168 you can easily adjust the handlebar’s position backwards by loosening the mounting bolts .

@boredbanda3168

3 жыл бұрын

@@ONTWOWHEELSBEN ohh I already ordered the AOM bar, hope it is good. Thanks for your help.

Hi ben.... Did you need to modify any of the cables when u installed KTM handle bar... As I belive the cable length may be an issue

@ONTWOWHEELSBEN

4 жыл бұрын

srikanta jagadeesh no the stock cables are just fine for the handlebar and risers (2”)

@srikantajagadeesh

4 жыл бұрын

@@ONTWOWHEELSBEN ... Thanks ben for the info... Two more questions... How much the handle bar costs? Any reason for not opting for KTM handle guards? I thought KTM was also good...

@ONTWOWHEELSBEN

4 жыл бұрын

srikanta jagadeesh pls watch my previous videos friend . I did use them until I changed to this new guard . KTM guards break upon falling down and that’s why I had to change .

@ONTWOWHEELSBEN

4 жыл бұрын

srikanta jagadeesh I paid 1300 for the handlebar

@srikantajagadeesh

4 жыл бұрын

@@ONTWOWHEELSBEN .. Thanks... Happy riding....

Hi Ben can the ktm handlebar fitted to the stock placing ? Without any risers?

@ONTWOWHEELSBEN

4 жыл бұрын

Yash Vichare no . You need risers that allow for the extra wide handlebar

@YashVichare28

4 жыл бұрын

@@ONTWOWHEELSBEN means I want say that is the ktm handlebar is as same thick like the stock ones.

@ONTWOWHEELSBEN

4 жыл бұрын

Yash Vichare no it is wider

@YashVichare28

4 жыл бұрын

@@ONTWOWHEELSBEN I am was going to install jb racing handlebar risers for Himalayan because of which I was confused whether the ktm handlebar will fix on it or it is more fat than the stock ones.

Please Give GPS navigation Link 🔗🖇️🔗

@ONTWOWHEELSBEN

2 жыл бұрын

bought it from england.

Hi. I like those hanguards. Which city are you in?

@ONTWOWHEELSBEN

4 жыл бұрын

geoffkeys Chennai . Got them from GP road

@geoffkeys

4 жыл бұрын

@@ONTWOWHEELSBEN OK, thanks for the info.

Can i fit on my x pulse 200 ?

@ONTWOWHEELSBEN

2 жыл бұрын

yes but only WITH the pivotable handlebar risers.

@babaisgarage4605

2 жыл бұрын

@@ONTWOWHEELSBEN tq bro ❤️

@babaisgarage4605

2 жыл бұрын

@@ONTWOWHEELSBEN from which web site did you buy that raises bro ?

@ONTWOWHEELSBEN

2 жыл бұрын

@@babaisgarage4605 amzn.to/2YG6jkJ

Himalayan is an ill designed bike. Why one is supposed to spend extra money after spending more than two lac rupees on new bike ? Gear shifting is also very hard. No such issues with bajaj avenger.

KTM handlebar model no. Please... Look great on it

@ONTWOWHEELSBEN

4 жыл бұрын

AZMAN ZAKARIA it’s from the 390 duke 2017 model

@ONTWOWHEELSBEN

4 жыл бұрын

AZMAN ZAKARIA also you will need bar risers with wider perch to fit the handlebar as it is a fatbar

@azmanzakaria3366

4 жыл бұрын

Tq bro for the info

Bro aa aa aa aa essa na Kara kr video mein 🤦🤦

Thanks, but you take so much time to explain just too much and bite a lot of words.