Router Table Build - Segment Three: Stock Prep & Dimensioning
Тәжірибелік нұсқаулар және стиль
Grain is everything. If you don't know how to get the best material from any given board you'll never reach your potential as a woodworker. Grain is where it all starts. Here we start from purchasing and progress through processing and use.
An exert of this video was previously uploaded as a teaser for the series I was selling at the time. For continuity sake I'm re-uploading it into the new series. The next episode in the series will be new.
Note: My analysis of the shrinkage of wood around tenon in carcass/chair is right except... rotate it 90 degrees. Lets call it a doing a hundred things at same time momentary slip. Still a historically accurate method of using green wood and getting tightening joints.
----------------------------------------------------------------------------------------------------------------
Hand Illustrated Plans are available at: squareup.com/store/wortheffor...
The series represents about 100 hours of videography and editing time for me on top of decade of experience learning the skills in both teaching and craft. Plus I had my normal work and building schedule to cover expenses at the time.
----------------------------------------------------------------------------------------------------------------
This channel is based on the value for value proposition. We depend upon patrons like you to fund our channel if you receive value from it. The time away from 'real work' that is our biggest expense. So if you feel these videos and series are of value to you and others please consider shopping and patronizing these sites:
- wortheffort.com
- / wortheffort_ww
- / wortheffort_sg
- / wortheffort
Non-"Affiliate" Amazon list of recommended stuff - www.amazon.com/ideas/amzn1.ac...
Пікірлер: 77
I was expecting a router table build, so I waited. Good thing I did. Not only was I able to understand fully the extent of the importance of wood grain, but now I know how to start building, not just a router table, but EVERYTHING else. The irony of it all is that it doesn't need to be shown. You just had to LISTEN.
@wortheffort
3 жыл бұрын
Thanks
Clear and very useful explanation of how to get the best result from a plank. Learned a lot again. Thank you very much for this. I live in Flanders (Belgium) and although I grew up with the metric system, we were taught in the 2nd or 3rd year of primary school that a dozen dozen equals 144 (a gros). That was in the years 1962 or 1963. I have the impression that such things are much less learned nowadays.
@wortheffort
3 жыл бұрын
Thanks & yep.
This has been the clearest explanation of the grain direction and what that means to the final piece you are making.
Very interesting. First time I've heard someone explain this so clear. Thanks!
@wortheffort
3 жыл бұрын
Thanks
Southern Yellow Pine has a mind of its own, I use it all the time and love it.
Brilliantly explained. These project based lessons are a really good format, but still excellent as standalone videos. Keep up the great work.
@wortheffort
4 жыл бұрын
Thanks
Thanks for sharing. It's not rambling if its valuable information- that's education. Thank you for the learning you enable.
@wortheffort
3 жыл бұрын
Thanks
The tips are always great but .....what a great one about planning out a small area between the two legs on glue up. Very much enjoy these vids and all the information.
@wortheffort
3 жыл бұрын
Thanks
I clicked to see a router table build but I got a great lesson in choosing the right pieces for each component. Very well explained and presented, thanks.
@wortheffort
3 жыл бұрын
Thanks
I thought this tutorial was excellent. I was never taught about grain direction. I am mostly self taught and learn the hard way with some disappointment. Thank you for making it worth the effort to learn and do it right. Thanks again, Lauren
@wortheffort
3 жыл бұрын
Thanks
agree 100% about the southern yellow pine. I moved to South Carolina from Illinois and was blown away by the quality and price of SYP. All we could get in IL was spruce-pine-fir. Which means no consistency and lots of knots.
@wortheffort
3 жыл бұрын
yep
Thank you. I am learning so much. I was a machinist - aerospace - and had to think about how castings behaved during metal removal. You are clearly describing analogous phenomena in woodworking and for that I am deeply grateful.
@wortheffort
3 жыл бұрын
Thanks
Excellent tutorial on learning wood grain and dimensioning to successfully complete a project. Thank you for taking the time to explain this to all of us. Well worth the time to watch this very instructive video.
@wortheffort
3 жыл бұрын
Thanks
Great lesson. I love all the deep dive lectures on the theory of the craft. The ramblings are the best part of the channel. Keep up the great effort.
@wortheffort
3 жыл бұрын
Thanks
Learning so much from these videos. Thank you
@wortheffort
3 жыл бұрын
Thanks
Pure gold. Thank you.
Thanks for a nother educational video!!! I have started to notice all the things that you are talking about since i have started to work with hand tools. You are a great teacher because you are talking on wood and how to look at it and understand it. Take care and thanks for everything!!
@wortheffort
3 жыл бұрын
Thanks
Thank you for continuing to educate and empower us.
@wortheffort
3 жыл бұрын
Thanks
Thanks for sharing that!
Gold. Amazing video
Thanks - info I never thought of before - I always learn something new.
@wortheffort
3 жыл бұрын
Thanks
solid working methodology. Great video
@wortheffort
3 жыл бұрын
Thanks
Lots of good observations here. One thing that I think goes with this approach: clean your tablesaw blade. Resinous wood can make the blade behave as if it were dull more quickly than if you use only hardwood.
@wortheffort
3 жыл бұрын
ya, don't do that enough.
very informational video a must watch
Wow!! Lots to think about!!! Great Info!!! Much Appreciated!!! Thank You Sir!!!🤔😁👍😎
@wortheffort
3 жыл бұрын
Thanks
supremely useful content. ty!
@wortheffort
3 жыл бұрын
Thanks
A lot to think on. Thanks for the information.
@wortheffort
3 жыл бұрын
Thanks
@thomasarussellsr
3 жыл бұрын
@@wortheffort your welcome
Thank you, grain understanding is my weak area but you made it very clear.
@wortheffort
3 жыл бұрын
Thanks
Very nice
@wortheffort
3 жыл бұрын
Thanks
Great video! I can always use a refresher on wood grain. My only concern is your planer. That guard gives me the heebee geebees. Be careful!
My wife make theses noises too when she stands up. 31:40 lol
I'm so glad i learned my starter skills with hand tools in pine... like u said, if your tools are not sharp, you will know it hahahah.
@wortheffort
3 жыл бұрын
yep
Very interesting & useful info. Also, that jigsaw has got to be the quietest jigsaw I have ever seen! May I ask what the model is?
@wortheffort
3 жыл бұрын
I reduce sound to not blow out eardrums.
Perry Murphy Thanks for the video. Great info. You mentioned sharp tools. Do you sharpen your saw blades?
@wortheffort
4 жыл бұрын
Thanks. some depending upon cost/benefit as things like bandsaw blades being $12 are not worth resharpening to me.
Another great wealth of information. Thanks. Are you finding construction lumber available in your area? I heard prices have gone up and short supply due to stupid covid-19.
@wortheffort
3 жыл бұрын
Thanks, yes
What I don’t understand and I’ve seen you do it in multiple videos is tuning you pencil several time along your square/straight edge
@Sillyturner
3 жыл бұрын
To continue - when marking a line. I have found that one pass is sufficient.
@wortheffort
3 жыл бұрын
force of habit from using knives instead of pencils. I only use pencils when filming so they'll show up.
Can't read the numbers on your white board, and it's slightly out of focus at 3:01
@wortheffort
4 жыл бұрын
Andrew More ya, these are run-n-gun style videos. Not as edited/reshot as normal as covering a lot more info. I’ll be making those kind of errors (not on purpose).
@jandrewmore
4 жыл бұрын
@@wortheffort That's cool, I was just thinking you could correct it before it goes "live". Keep up the good work.
This video is you stock prep & dimensioning video from 6 months ago
@wortheffort
3 жыл бұрын
Randy Gabbard ya, I said that in description and gave reason why reupload.
@coalcountrycandles
3 жыл бұрын
wortheffort I missed that and was scratching my head why I was having flashbacks of a video I had just watched a few day’s ago. Lol