Finally I finished my big project - Router table! What you think about my work? Waiting for your feedbacks and likes!) AND: I made mistake about sizes on 7:10 min. 580x400x12 mm Correct size is - 588x400x12 mm!

@fedor0804

4 жыл бұрын

а зачем так крепить все? почему не с торцов?

@mr.vereshchak

4 жыл бұрын

Такое крепление надежнее. Саморез вкручивается поперек волокон а не вдоль, плюс лицевая часть чистая.

@karlpopewoodcraft

4 жыл бұрын

Love the finished project mate, I really like the fact you made eve with simplicity and efficiency yet still being mindful of the visual, really nice work.

@lcantillo2

4 жыл бұрын

Cual es la medida de la placa de aluminio

@lcantillo2

4 жыл бұрын

Cual es la medida de la placa

Это не фрезеровочный стол, это - шедевр! :)

The first half of the kzread.infoUgkx3ICSK6nSknaL_45CU2NmFSoXjarGMDiJ book is everything about wood: types, tools, finishes, setting up shop etc. The second half is all about doing projects for inside and outside of the home. The color pictures are helpful. After reading a dozen of these types of books, this is probably the best overall (layout, color photos, plans). Only detraction is that many of the projects use a table saw/router/planer, which are usually expensive and take up space, so the plans are less friendly to newcomers and the budget conscious. But I know I can use a drill, circular saw or a jigsaw to make the projects.

шикарный стол, возьму на заметку, такой же попробую сделать, если хватит терпения)))))))))))))))

Получил нереальный кайф от просмотра! Спасибо за видео!)

That sir is the finest sturdest piece of shop furniture I have watched and I've watched a lot of them. Great job. That will last forever.

@boydmerriman

4 жыл бұрын

Between the air nailer, the glue and lots and lots of screws (way more than necessary), It will rot apart long before the edges budge!

Подобные видео у меня развивают комплекс рукожопости. Мастеру огромный класс!

@Granat4927

3 жыл бұрын

должно быть наоборот!

зПрекрасно все: и замысел и воплощение! Продумано все! Здорово!

Смотрел и восхищался! Виват Мастеру!

Этот стол заслуживает лайка,однозначно)))

Вот они -ОчУмелые ручки!!! Красаучик! Шикарная работа!!!

That was the slickest looking build for a router table I've seen on KZread

I think your work is exemplary. I especially enjoy the vital attention you give to precise measuring and processing of the elements of your projects. My grandfather always told me that a half-assed job is no job at all.

Просто супер!) Я смотрел и кайфовал)

Золоті Руки, Світла Голова..... Верещак - одним словом..... Наш!!!

I was so impressed by this build that I recreated it myself!

I thought this was going to be another Norm's Router Table but it's much more. Great job! One suggestion, consider getting a router lift and dedicated motor like a PC 7518. It will much easier and faster to change bits and save your back.

Grandiose, the router table is almost too nice to use it. Thank you for showing.

@andrewtongue7084

4 жыл бұрын

Agreed, GreenDeetype, it is a little grandiose - you'd almost be afraid to use it - for fear of scratching the aluminium or perspex ..

Wow. This looks so great I think my wife would agree to keep it in our living room!

This is the nicest router table I've ever seen. I really like the use of multiple materials as well.

Мастеру - респект! За размеры - отдельное спасибо.

@mr.vereshchak

4 жыл бұрын

Спасибо) Я ошибся в размере на 7:10 мин. 580x400x12 мм Правильный размер - 588x400x12 мм!

Красава! Приятно посмотреть на мастера!

Sie, Sir, sind ein echter Handwerker und Künstler. Dies ist die erstaunlichste Router-Tabelle, die ich je gesehen habe. Danke für deine Videos.

@mr.vereshchak

4 жыл бұрын

Danke!

I don't usually like to buy pre-made equipment but I would pay handsomely for one that well designed and executed.... fantastic...

Супер 🙌 зачёт👏👏👏 однозначно Like👍👍👍👍👍........

Probably wayyyy too many fasteners, but it definitely isn’t coming apart! Nice build!

This is the most beautiful router table I have ever seen. Thanks you for sharing.

That was sweet. I like how all your equipment tables move around on wheels. Nice.

Молодець!!!! Хорошая робота!!!!👍👍👍

@mr.vereshchak

4 жыл бұрын

Thanks 😊

wow.. this is amazing and very inspirational. I really like the idea of the aluminium profiles you used. Easy and I assume not as expensive as Incra or Magswitch

@kyle6seaman

3 жыл бұрын

not sure if he ever responded but looks like 8020. www.mcmaster.com/structural-framing/t-slotted-framing-rails/

one thousand likes, nice job, i going to replique that table for my litle workshop, tank you

Excelente, un trabajo de otro nivel...el sueño de muchos, entre ellos yo. Un saludo desde Ibagué, Tolima Colombia.

Real nice build and excellent work! I wish there was a little narration in English for some more detail but still a great project.

Руки из плеч. С..ка, я завидую))

@user-rx7hz7ip2t

4 жыл бұрын

не руки, есть время и деньги вот и все ну и желание конечно)) у всех ситуации разные, кому семью кормить вкалывать а кому хобби заниматься.

This is the finest router table project I seen so far! Great job! 👏👏👏

You did a fantastic job! I would make one but once you got toward the end it got more complicated.

Best router table on the internet! There appears to be 32 jealous people. Well done, sir!

@Timthornton1

4 жыл бұрын

Now only 74 jealous people out of 4571 likes.

@CarmoniusFinsnickeri

4 жыл бұрын

Well. I did not give this a thumb down and I think It's a good looking router table. But; No router lift, no fine adjustment of the fence (super useful feature imo) and insert rings that requires 3 screws every time you want to change?. There are hundreds of better (more user friendly and way quicker to work with) router tables on the internet.

@jasonrobinson9524

4 жыл бұрын

@@CarmoniusFinsnickeri So... dude... I wasn't being literal. I was giving a compliment for a job well done. Taking the time to share so others can learn deserves more kudos and less criticism for perceived imperfections from know it alls.

@CarmoniusFinsnickeri

4 жыл бұрын

@@jasonrobinson9524 Don't consider myself a know it all. But I know a bit about router tables and try to write what I mean, makes it easier for those who read the comments😉

мужик, ты- молодец. вот чему молодежь учить нужно.

@andreipypkin3913

3 жыл бұрын

Моя мебель дома сам с другом делал в Инстаграм dec111333

@andreipypkin3913

3 жыл бұрын

Попроще но тоже хорошо

Just simply EXCELLENT! Thank You for sharing your talent.

Пипец. Это просто праздник какой-то! Я срочно хочу себе такой же на дачу!)) Молоток мастер, золотые руки!!!

Как всегда всё на уровне. По любому лайк.

@mr.vereshchak

4 жыл бұрын

Спасибо)

Congrats!!! You should be proud of this masterpiece!

@pablomauricioavilatorrez9717

3 жыл бұрын

Hello, my father and I collected the furniture plans of my company and the companies we work in and we are selling them are more than 10,000, contact us by clicking here api.whatsapp.com/send?phone=59176829299

Best table i have seen so far, this must be the one i build for my shop 👍🏻👏🏻

That router table look very very close to New Yankee Work Shop Norm Abram's version from years ago. I know because I actually built one with a few mods, myself. They are solid and extremely useful. I installed dual locking casters so when I lock them, it is rock solid and does move anywhere. Thumbs Up!

Ты и в столярке хищник 👍🦅

Fantastic, b ut I think I was waiting for him to install a router lift

That’s the best router table, workstation I’ve ever seem. Amazing work.👍🏻😎

Hut ab richtig gemacht. Da wird man neidisch, würde ich auch gern können. Top.

I am ready to place my order for one of these!

@michaelreyes3510

4 жыл бұрын

You will get more than 16,000 plans and 173,226 project from *www.WoodPlanner. xyz* ❤❤❤❤.

@theacidblaster281

4 жыл бұрын

@@michaelreyes3510 hacker

@28ambob

4 жыл бұрын

Ryan Ash me too

My goodness! What a beautiful job! I'd be curious to know how the epoxy top holds up over time. Have you had good experience with it maintaining its sign over time?

@WoodfulProjects

3 жыл бұрын

I can give you an answer since I’ve already done my router table top with epoxy too. Since 2017, it hasn’t moved. Of course it has a lot of small scratch but nothing to be worried about. Probably that the wax and parrafin I apply for a better slide do help too. cheers

Все продумано и выполнено отлично ) Смотрел не отрываясь.

Esta de lujo esa mesa para Router Master.... exelente video Le mando Saludos desde Guanajuato México 🖒

МОЛОДЕЦ !!! Больше нечего сказать.

@user-ft4el1cn1n

4 жыл бұрын

Я хочу спросить совета. В работе у меня фрезер мощностью 2400 Вт. А какая, на Ваш взгляд, оптимальная мощность для фрезера в стол. Я начал серьезно заниматься столяркой совсем недавно.

@mr.vereshchak

4 жыл бұрын

Спасибо Я думаю, что это как раз то что нужно. и еще хорошо если в нем есть регулятор оборотов.

Thumb up is not enough. A kind of "wow" would be more appropriate. Great job !

Отличная конструкция!👍👍👍 Great construction!

Great Job, I'm so impressed with all the nifty details!

Amazingggg!!!^)

Чем покрывал стол? Крутяк, видел только в столярных журналах.

@mr.vereshchak

4 жыл бұрын

Спасибо))) Столешница- эпоксидная смола Все остальные - Масло воском

Very Nice! I just missed out on a similar Router Table locally, really nice one. Was so bummed, but this will work nicely. Love your videos, the speedups are perfect.

Mine is almost the same as yours, but I really love the fence - I will definitely do the same when I make my next improvements on it. Awesome job!

Здравствуйте за работу лайк подскажите размеры станочного профиля удачи вам .

@mr.vereshchak

4 жыл бұрын

Спасибо) 20x40 мм 20х80 мм

Perfect router table .... but never hold the thumb in the level of the nailing gun

@Xbeerd

4 жыл бұрын

second that! I cringed a bit for sure.

@SuperDataSafe

4 жыл бұрын

I once nailed myself to the ceiling. Had run out of nails so I took some that were too long so I could finish and go home. Stuck between two pieces of wood with one finger pierced. It was before cell phones and I was alone, so I ended up pulling until the nail bent. Ouch... 8:04 By the way, exciting place to have the hand. : - /

@sapulpaorganics5402

4 жыл бұрын

Guess he will learn the hard way.....hopefully it won't go too deep

WOW.... great job guy... A masterpiece BRAVISSIMO!!!

Есть люди которые хорошим инструментом делают шедевры,но есть один мной уважаемый парнишка,который сам шедеврально делает инструмент и станки,друг это ты,просто высший пилотаж,браво и спасибо за ролики,красавчик,есть чему поучиться!

@mr.vereshchak

4 жыл бұрын

Спасибо большое)) приятно слышать 😊

26:16 Занять целый ящик кабелем и розеткой! Это не хорошее решение, тем более, что в столе места более, чем достаточно.

I'm sure you can find awesome woodworking plans on woodprix

SUPERTOLL - ich bin echt begeistert!!

Great video and well done! When I typed "make router table" your video showed up as number 1. Here in the USA, you would have to put an electrical housing box to cover your wiring. Also possibly move that electrical housing box inside the main router compartment to maximize the use of that top right drawer. I could never make what you just did but it certainly gives me a great idea for my router.

живу в однушке,гаража и сарая нет,нахрена я это смотрел...

@Alexey_Loktev

4 жыл бұрын

чтобы появился стимул гараж заиметь)))

Это просто охуенно, по другому не скажешь.

GREAT build! This has to be the best router table build video that has been made. I was impressed that you provided the dimensions in the video. What I've seen of your other videos the work in them is just as fantastic. My Father-in-law would have loved your work, he was a Machinist by trade and a wood worker as his hobby, he did some fantastic work as well. Thank you!

とても丁寧な作業です、にほんじんこのみです。 貴方に大きな拍手を送ります。👏🏻

I can never understand talented makers who make a beautiful piece of art with the woodworking and then ruin it with unsafe and bodged together wiring. It would have made more sense to not put the switch on the side in a separate box and that would safely let you use the drawer. The problem with push on connector is they also pull off if you have the in a drawer like that. When thinking of wiring, ALWAYS think “How can this go wrong?”. So yeah, love the table, hate the wiring.

@DaBuick

4 жыл бұрын

Every journeyman electrician has their opinion. It’s his design so shut up, let’s see your build so we can dramatically bitch about that!

Whouuu , the best Router Table i have ever seen on youtube

You are number 2,497 in my subscriptions on You Tube and you are at the top of the list of quality,precision,details,etc.I'm at a loss for words Kudos to every step every detail.

@mr.vereshchak

4 жыл бұрын

Thanks😊😊😊

You are on another level. I grasp a lot of what you did- but the level of planning and experience shows. Very nice!

That is not shop furniture. That is Art!

@mr.vereshchak

3 жыл бұрын

Thank you!

I really like this. Very clean solution. Neat idea to use those generic profiles. They actually look very professional there.

Wow! Now, that's what I'm talking about!!! That is not a router table, that's a piece of beautiful furniture. I purchased a router table second hand. The man I purchased it from made it and used the exact same design as yours. And it weighed a ton when I helped him, carry it across his lawn. Man, you really do beautiful work. This has to be the nicest piece of shop furniture I have ever seen. And believe me, I've seen almost everyone on KZread because I have been bedridden for the past 2 months and watched all the woodworking videos I could. When I get back out to my shop, I'm going to add the oak trim you have on yours. That was the only difference between your's and mine and the trim just takes it to a different level. I've subbed so I don't miss your videos. Take care!

@mr.vereshchak

4 жыл бұрын

I pleasure that you appreciate my work so highly. Thank you and get well soon! Good luck to you in the workshop) Happy New Year!

Your work is beautiful! I look forward to seeing the lift table you build for it!

Best. Router Table. Ever!!!

What you can do with perfectly average tools (stanley, makita) is an inspiration. I love the way you finish surfaces (epoxy) and then take a router to them afterwards. Subscribed. Inspired. Jealous ;-).

I totally agree with Bill Lipton patience and attention to detail and name and source of components excellent

What a fantastic piece! Thank you!

This is absolutely incredible! Great job! I love your videos.

Really amazing and durable work,as every project you make.My congratulations !!!

Muy buen trabajo, hermosa mesa de router. Felicitaciones

How good it is when your hands are in place and next to the store Leroy Merlin or something like that .You are a master !

You Sir, are a true craftsman and an artist. This is the most amazing router table I have ever seen. Thanks for your videos.

PARABÉNS, Tiro o chapéu

A true woodworking master

Sensacional, excelente trabalho. Parabéns.

You don't know when to stop haha. You are incredibly perfectionist. This is beautiful.

I subscribed as soon as I saw the kettlebells. This guy MUST know what he’s doing if he knows how to use гири.

@runliftthrow217

4 жыл бұрын

Nice work on the table BTW.

oh great!

Oh, I definitely have to TRY and make that fine piece of art! Nice job my friend!

You Sir "Are a Wood Working MASTER!" In my opinion the best Router Table ever made! Well Done Man. Better than a professional table!

Hands down, the best video for putting together a router table on here ... just an absolute work of art

@mr.vereshchak

3 жыл бұрын

Thanks a lot)))

Excelente quedo funcional y un banco para rauter muy completo GRACIAS POR COMPARTIR.

Awesome techniques! Very inspiring. Thank you.