No video
Roto Grip Clone With Surface Is NASTY!
Changing the surface of the Roto Grip Clone was a game changer! Went from a bowling ball that was clean and pretty angular to STRONG and smooth!
Subscribe to my new channel: / alwaysbehoopin
BowlersMart affiliate links below!
Order a Clone here: bit.ly/RGClone
Order everything else here: bit.ly/3sUTcHd
Subscribe to my new channel: / @alwaysbehoopin
Venmo @LNAPOLES All donations go towards the new camera fund!
Link to my Patreon: / luisnapoles
Link to my Discord: / discord
Promo code NAPOLES10 at www.coolwick.com for 10% your entire order and free shipping!
Form to be featured in a match: forms.gle/u1zraNWuV8vxgEBf6
luis,Luis napoles,Luis Napoles,bowling,bowling,bowling ball,900 global,Storm
Пікірлер: 76
I bought the Clone because I needed more curve in a ball. Another reason was, in league play, I was tired of searching for my ball in a sea of balls that looked alike. The Clone stands out. After a few practice sessions I decided to take the shine down with a 2000 grit pads and I got the results I needed for my throw I still need more time with the ball but, so far, I'm happy with my purchase.
@jimward278
Ай бұрын
i just got one today i wanted a gem but the price needs to come down and the clone was on sell
Super helpful video. Helped me figure out possible solutions to some issues I'm having with my equipment! Keep up the great work and good luck this year!
@LuisNapoles
8 ай бұрын
Thanks so much!!
I follow Luke’s suggestion of resetting the surface on every ball I get. That way I can replicate that finish when it needs a full resurface. On polished stuff, I use a 1000 pad on a spinner then Step 2 compound.
@shannonkirby7040
8 ай бұрын
Interesting on the polished stuff, using 1000 then step 2, where’s that usually take it to?? I’ve been hitting everything with 2000 out of box as starting point
@BasketBowlers
8 ай бұрын
@@shannonkirby7040 I don’t have a scanner, but I imagine it takes it above 4000, but the 1000 base gives the ball some teeth. Luke Rosdahl says the gloss finish from the factory can make balls go too long. I’m fairly speed dominant so I stuff that’s super polished doesn’t work for me normally.
@LuisNapoles
8 ай бұрын
Yea I been doing that as well !
I just had my new Clone drilled this morning (13#). My first ball after not bowling for 40yrs was the UFO. Loved it until its status. The Clone reacted well today. League tonight, TOC in 2weeks. Great video.
@LuisNapoles
8 ай бұрын
Bowl well !!
I liked the reaction you were getting with the surface you put on it. I change the surface on the balls I have , but several time I do not notice a big change in the reaction, unless it a huge change as you did here. Going from a 3000 surface to a 1000 , I have very little reaction change. Keep up the great work.
@LuisNapoles
8 ай бұрын
I prefer it with polish I think!
I've been looking for this type of video. Luis always makes the banger vids
@LuisNapoles
8 ай бұрын
Thanks so much!! I appreciate that!
IMHO the polish on the clone is what makes this ball so versatile (medium, dry and over/under) and first out of bag when transition hits. If I knock off the polish then it's just like most of the other balls I have in my bag.
@LuisNapoles
7 ай бұрын
It’s def a good one
Great bowling content
@LuisNapoles
8 ай бұрын
Thanks so much!!
Interesting video. I usually always throw out of box because not really sure of what I want the ball to do versus orb. But enjoy the videos. Have not seen many responses from you on questions that bowlers ask
@lamarmoore7117
11 ай бұрын
I throw out of box surface myself because I figure they made the ball like that for a reason
@LuisNapoles
8 ай бұрын
What kinda questions?
@larrylacroix3944
8 ай бұрын
Not sure as this was three months ago. Like where you stand and why you move. I am sure these are questions you have answered and as a bowler I should know them Just curious
Wow, what a difference a surface makes! Your ball reviews are better now, hope to see you in the comments again. Your medium spin, medium speed roll is everything us league players could hope to accomplish.
@LuisNapoles
8 ай бұрын
HUGE difference’
I usually scratch up the surface, even before I throw the ball out of box. Thanks Luke! I prefer using CTD Trucut pads and scanner so i know what surface I have on the ball.
@cyan0xide
11 ай бұрын
youre spending all that $$$ for factory finish might as well enjoy it a few games before lane shine imo
@LuisNapoles
8 ай бұрын
Yup!
This ball looks super amazing either way great video
@LuisNapoles
8 ай бұрын
Thanks so much!
I try it out of box then make the adjustments i hate reactor gloss so on my duo i had to dull it to 2000 then polish it back up rolls way better for me now so have to do that with all balls that have reactor gloss
@LuisNapoles
8 ай бұрын
I usually re polish my stuff
Good video Luis . I hit my clone with a used 1000 pad . Im going to throw it in practice and see if it works for me. I will reset the surface if it doesn't. League will start the 24th of August.
@LuisNapoles
8 ай бұрын
Thanks!!
Lol I loved the red light and green light LOL 🤣
I NOW change the surface immediately if I can to whatever grit it supposed to come at. If polish, I use CTD polish. However, I got my clone Saturday. I tried it with polish, I didn't like it. Then tried it with 3000... 245 game! So then I put polish back on it, it was okay. I'm going to try 4000 next. My Summit is straighter, the Clone shapes better.
@LuisNapoles
8 ай бұрын
I been doing that lately as well
I will definitely give it a week or two with polish to get a true reaction for my specific house conditions. However, I still haven't found a ball where the polish stays on yet.
@jaywhey8822
11 ай бұрын
Update: As expected, gave the polish one night in league. Like every other ball, the polish was taken off and it was immediately a more consistent reaction.
@LuisNapoles
8 ай бұрын
Heard that! 💯💯
For me. I would reset the surface with 1000 or 1500 and then re-polish it with a mild drill since it’s so strong. good vid . Thanks.
@LuisNapoles
8 ай бұрын
Good idea!
Actually, it might have looked good straighter if you had been warmed up. Once you loosened up your speed and release looked better. Like the Clone, and glad you did the surface change. Both Barnes and Rosdahl liked it better with less or no polish. Btw, I have friends that will throw the first ball of practice (at about half speed) and start whining that the lanes are hooking, or they are oikly, or whatever. My first shot, I'm just trying to get the knees to bend, and the ball to get off my hand clean, and loosen my old muscles.
@nevinkinzel
11 ай бұрын
Yeah, no reason to whine about shots when you're not warmed up. My problem is I strike all through practice and then fall apart in the games. 😂😂
@LuisNapoles
8 ай бұрын
I can agree with rjay$
Always always always throw with the out of box finish until I know how the ball is going to roll in the conditions I'm most likely to encounter and adjust as needed.
@LuisNapoles
8 ай бұрын
It’s just easier to replicate if you do it before drilling
What is you go to pearl for strength? I just had the stealth pearl with a strong layout and it was not great. Looking at the exotic,eternity, or paragon pearl
@LuisNapoles
8 ай бұрын
VEBO!
If a new ball is polished I leave it alone out box till I see how I like its reaction and then may take down the surface. If its matte oob I usually hit it w whatever # grit it says it is to make sure I can repeat it. If I keep a ball say at 2000 I'm refreshing it w a TruCut pad every 3-9 games. My Alert got little use at oob polish but its a fantastic fresh ball for me at 1000 grit. I usually bring a mixture of polish and matte balls w me.
@LuisNapoles
8 ай бұрын
I can see that yea
Cool video talk tech bowling bowling ball roto grip clone bowling ball with nano technology in the bowling ball more strike and spare hitting power at time Luis
@fatcatsquekyyy7752
11 ай бұрын
Are you an npc why you keep yipping & yapping about bowling video buzz words?
@LuisNapoles
8 ай бұрын
Thanks so much!!
@scottythompson940
8 ай бұрын
@@LuisNapoles your welcome
I missed it in the video. What surface did the shop knock it back to?
@LuisNapoles
8 ай бұрын
2000
Where is the snap, looked like the magic gem
once i get mine im knocking the polish off it, if i leave it on then the exotic gem and the clone gonna be too similar, i didnt like the gem so hopefully the clone fits that spot sanded
@LuisNapoles
8 ай бұрын
Both are good but I prefer the polish on it
I like mine out the box 📦
@LuisNapoles
8 ай бұрын
Same!
I like it better out of box
@LuisNapoles
8 ай бұрын
Me too!
your first shot, i thought it was going to be gutter
@LuisNapoles
8 ай бұрын
Glad it didn’t lol
Since i throw just spi equipment
@LuisNapoles
8 ай бұрын
I get it
I polish the heck out of my Reality and put 3k on my zen, I love making changes on my balls.
@LuisNapoles
8 ай бұрын
Nice!!
Can you do a dna clone comparison please
@LuisNapoles
8 ай бұрын
I need to yea!
maybe throw some Step 2 on it?
@LuisNapoles
8 ай бұрын
Definitely
Shouldn't you always want to keep your ball in the pattern/oil? Lesson to be learned never judge a ball when you're not throwing it the best cause those first few were terrible, you never get your balls out like that. You would've retired that ball lol and would've cracked on the shelf !
@LuisNapoles
8 ай бұрын
🤙🤙🤙