Thanks for the video! This may be a dumb question, but what are the packaged isolation rings for?

Thank you for your educational tutorials. It helps to have the proper information before attempting anything that involves penetrating flesh, or in this case our protective membrane... Some of you should really think about the seriousness of that fact!# Thankful

Thanks for the review, man👍👍 setup was very helpful

@gregd8735

3 жыл бұрын

No problem

I have the same one in complete black can I ask what’s the elastics are for and where they go or don’t I need it on this kit

Thank you for this!

Have you done any works on it? How’s the performance?

I have this machine but can’t do much with it! It cuts through the fake skin and is super painful on real skin!!! Did you manage to pull good lines with it? Mines going in the bin I love coils!!!!

For what are rubber bands

Why does the needle not move up and down on the stigma machine. Could you help me please?

Thanks for the review and setup! How do I turn it on once it’s plugged into my power supply haha. My power supply is turned on

@gregd8735

3 жыл бұрын

It's plugged into your power supply it should come on with the foot pedal. Going to have a foot pedal plug into the power supply also you operated just like you would have coil machine do use the foot pedal to turn it on and off

Es buena esa máquina???

I’m about to order one for me. Hopes it works 👍🏽

@lukecartwright4405

Жыл бұрын

How did you get on with it?

Is this the machine that Amazon sells? what is your opinion right now?

@gregd8735

3 жыл бұрын

Not bad.. Pulls clean lines

I had a BAD experience. From the beginning, sometimes the needle stayed out after I stopped the machine, I said that maybe it will recover in time, but the problem has worsened. After I sent the machine under warranty I found out that you have to pay a service fee of 20 euros just to check the machine(the machine is under WARRANTY) After they checked it, they said that I used needles without a membrane and the ink ran in the machine (I only used kwadron and cheyenne, cheyenne have a membrane that is too strong for stigma, they also said, so be careful with "all major cartrigde brand ") Overall they tried to find all sorts of reasons to blame me for handling bad the machine, and not giving me the guarantee. And now I have a stylist stigma that stays in the drawer because I didn't want to pay for spare parts and repairs (134 euros) even though it was under warranty

Que tal sale esta máquina ?

im sorry did u watch someone else try and set this up and u make a video out of this yourself. Because a lot of the things you did were incorrect by covering the rotation to where u can adjust the depth of the needle. Also you never want any tape near where you have to unplug your machine You can use a rubber band instead to make it secure, you can run the cord straight threw the blue clip cord cover and not have to break the cover so it goes straight threw with no rips. Also when you are trying to explain something or show something you know 100 % what you are doing first, just FYI

The Clipcord Cabel is in the Box?

@gregd8735

3 жыл бұрын

Yes

I Have one and its Good actually. Less vibration and the motor sound like a sleeping cat.

@overthink2020

3 жыл бұрын

Is it Good machine ?

@invisiblegrey4953

3 жыл бұрын

@@overthink2020 Yes its a good machine... My advice is use a descent cartridge needle for it👍✌️

cnc q3 would be better for the price of 110 uk pounds adgstable stroke by twisting it, ive tried everything and lines were poor. low volts to high it might be good for finger tattoos tho!!!!! imho???? im buy cnc q3 today i think

I have a question, should the grip needs to be sterilize after the work is done? Thank you.

@gregd8735

3 жыл бұрын

Take everything off of it. Then sterilize the whole unit

@carloszepeda9132

3 жыл бұрын

@@gregd8735 Thank you for the answer so... the stigma grip should be sterilize then. I appreciate it

I order it i hope be a good machine

@tomaszborczyk1416

3 жыл бұрын

How's your machine

@overthink2020

3 жыл бұрын

@@tomaszborczyk1416 thats so good

@lukecartwright4405

Жыл бұрын

Any good?

@overthink2020

Жыл бұрын

@@lukecartwright4405 i still working with this machine

I bought this from amazon and the description says the stroke is 0 - 4.5.how is the stroke adjusted?

@lukecartwright4405

Жыл бұрын

Good question

@burna803

Жыл бұрын

I believe they come in a 3mm stroke. The needle depth is adjustable from 0-4.5mm

@lukecartwright4405

Жыл бұрын

yea its 3mm but can adjust the the needle depth is all

Why to people put like plastic bag stuff around the cables

@gregd8735

3 жыл бұрын

To keep a clean surface in case in touches the customers skin

@keiranshearer4822

3 жыл бұрын

@@gregd8735 appreciate you

@keiranshearer4822

3 жыл бұрын

@@gregd8735 can you tell me do all these new cartleges fit any pen gun ?

@gregd8735

2 жыл бұрын

@@keiranshearer4822 should fit most

Same pen 🤔

@rowilanthonypopelo3791

2 жыл бұрын

I have one

Bananu kono sisteme