Roll up Door Conversion | Box Truck RV door install |
Ойын-сауық
Today I'm taking a big step, Converting the roll-up door into a single entry door. It turned out a lot easier than I expected. In my opinion, this is the easiest way for anyone to convert their large heavy roll-up door into an easy-to-use RV-style entry door.
This is especially a good path for anyone with limited tools, skills, & budget
I purchased this door slightly blemished used from "Michigan RV outfitters" for about $500 including shipping. Materials were about another $250
Пікірлер: 63
I love how you explain things before and during what you're doing
Absolutely brilliant use of the existing door! Such a time and effort saver and you have a solid foundation. Can't wait for the next one!
@nomadbrad503
Жыл бұрын
I appreciate you! Got a few big ones coming…mini split heat pump and motorized bed lift 😳
@JJfromIA
Жыл бұрын
@@nomadbrad503 can't wait!
Best use of the original door I've ever seen! 🤩
@nomadbrad503
2 ай бұрын
Thank you! It made sense to use what was existing rather than rip it out and build a new wall
Nomad Brad, the box truck is looking amazing. I love how you don't waste materials. I can't wait for the next project.
@nomadbrad503
Жыл бұрын
I definitely try not to waste. Thanks for noticing 🙏🏻
crazy you don't even have 10K views on this by now. You do a really good job of explaining everything - including things people might not think of - like leaving the gaps for water and box flex. Because of your design i am seriously considering trying a box truck build - biggest selling points is lots of solar panel space and standing room and more than anything else, 24/7 AC.
@nomadbrad503
23 күн бұрын
Thank you! A box truck is the way to go
Brad, catching up on missed programs. The DOOR🚪project worked out great. Glad you have your rear door🚪entry way now. To the Cold you had. They last 14 days or 2 weeks which ever appears 1st, LOL😁! For past many decades I have taken 1000mg Vit C w/Rose Hips morning🌞 & evening🌛. What your body never needs will go away. Have not had a Cold in a very long time & never want one. always, Tommy🤠
@nomadbrad503
Жыл бұрын
Thanks 👍
Watching you inspires me. Looks great with the new rear door. Cheers from Albuquerque
@nomadbrad503
Жыл бұрын
Thank you! I’m planning to spend summer in northern New Mexico. I miss hot springs !
Sir you are a genius 💯💯I love it.
@nomadbrad503
4 ай бұрын
Thank you! I love how this worked out
Looks great.
@nomadbrad503
Жыл бұрын
I appreciate you
Yes! Yes! Yes!
Instead of siding get two sheets of 032 refinished white aluminum. Then everything would match.
@nomadbrad503
6 ай бұрын
That’s a great idea!
Looks great I just put I. My microwave in my box truck . I hate the roll up door in mine .. I’m inspired 💪🏼
@nomadbrad503
Жыл бұрын
The roll up door gets old pretty quick 😂 I believe almost anyone could install a regular door with this method. You should give it a go
@MotoMiles
Жыл бұрын
I definitely will now ! I am Impressed at how crisp it looks too ! Incredible
@MotoMiles
Жыл бұрын
Another question is there a plastic or vinyl version of that wood panels that you put on the outside? I’m not sure if they sell anything that similar that’s as waterproof as what you have.. Thanks in advance.
@nomadbrad503
Жыл бұрын
@@MotoMiles I haven’t seen anything like that at Home Depot but I’m sure it exists somewhere
@MotoMiles
Жыл бұрын
Great update I install the door. I just have to put the outer panels on but I am really pleased. Thanks from so much for posting this video. I gave you a shout out. I don’t know if it means much on a little channel like mine but I’m really appreciative.
Have you had problems getting anything in and out of the van because of the small door access?
your vids rule.. BOOM! lol
@nomadbrad503
4 ай бұрын
Hahaha I appreciate you 😎
I would love to meet you if you ever get to Olympia, Washington let me know 😊
@nomadbrad503
9 ай бұрын
Planning to visit the pnw this summer. I love the Olympic rain forest
@taniapeebles8426
9 ай бұрын
I'm not sure what summer you are talking about but sure 2023 is over and 2024 is a full 3 season's away 😉 🤔 but you just hallor will you
Hi Brad, love your videos!!! Did you remove all the door lift system garbage inside? Also, would there be any issues with doing the insulation and framing on the inside of the back door? I wont have a full door, just a flip up access door on the bottom since my bed is along the back so i can access underneath storage.
@nomadbrad503
5 ай бұрын
Yes I removed the large door lift spring at the top and yes you can insulate/frame on the inside if you like
Did you remove the tracks on the inside that the door rolls up on and if so, how ? Don't at least part of them nearest the door actually hold the door in place ?
@nomadbrad503
3 ай бұрын
correct, I did not remove the tracks.
This may seem like a dumb question but are rivets not the same as screws? Like if you have to remove a rivet do you always have to drill them out or can you unscrew them somehow?
@nomadbrad503
Жыл бұрын
Rivets are not screws. The only way to remove them is to drill them out
Think pickle bath for your burn
What did you use as the trim that wraps around the new exterior real wall
@nomadbrad503
3 ай бұрын
I used pvc molding from Home Depot and painted it black
Question: How long is the floor on the inside of the 14' Uhaul Box Truck? The Uhaul Truck Sales site seems to say the floor is 10' 9" in one place and another places seems to indicate that it is 11' 11" Thanks for your help.
@nomadbrad503
Жыл бұрын
The floor is 12’ roof is 14’
@JRao
Жыл бұрын
Thanks - I look forward to your future videos
@nomadbrad503
Жыл бұрын
@@JRao I appreciate you
Where can I get a door like the one you are installing? Because I like your idea 😊 Thank you!
@nomadbrad503
Жыл бұрын
I purchased this one used from Michigan rv outfitters. The sell on eBay
@MotoMiles
Жыл бұрын
I was actually able to get the same door on Facebook marketplace. An RV shop sometimes posts doors on there that aren’t necessarily used but they have good.some little like small, cosmetic flaws like a scratch on the inside. this is the only video I found on KZread that actually breaks down how to even approach doing this concept of installing a door. So I am going to follow it to the letter. Especially since the rear of the truck is about the same dimensions if not literally the same as my own.
@nomadbrad503
Жыл бұрын
@@MotoMiles good job finding a deal on Fb marketplace 💪🏻 this is definitely the easiest way to add a regular door
@rafaelrodriguezrr87
Жыл бұрын
@@nomadbrad503 Great ! Thank you 😊
14:08 How come the green stuff isn’t on both pieces of the Solar Board?
@nomadbrad503
2 ай бұрын
Good question. For some reason one of my solar boards was painted green, the other was not. Not sure why. They both had the reflective backing on the other side
Great job! Where's part 2?
@nomadbrad503
Жыл бұрын
It’s a work in progress
Look Cool, Where Did You Get That Door From?
@nomadbrad503
2 күн бұрын
Ebay
Where did you buy the door from?
@nomadbrad503
3 ай бұрын
found it on ebay. its a "lippert components entry door"
@4x4frank
3 ай бұрын
@@nomadbrad503 Thanks im going to make a door using your video as gudance. GREAT JOB
That underlayment is OSB not mdf.
@nomadbrad503
6 ай бұрын
Correct