Unfortunately, the Roland Owner/User Manuals miss the mark of being a complete guide to understanding their wonderful products! They got the "Owner" part okay, but they gotta nail down the "User" part a lot better! I am almost not even sure why they write them most times because all they do is have you flip around from page to page on a wild goose chase for the elusive answers. This video nailed it! Please keep doing these videos Mr. Mystery Roland Man.This was really very helpful. Cheers.

Many thanks for taking your time to help others. God bless you.

Thankyou brooooO!! I've been looking everyone to figure out what to do, and you just saved me a whole lot of money! cHeers brother

Wish I could leave 20 thumbs up on this one. I have a Godin SA Freeway and a GR55 that I was going to ditch. The settings made me keep it. HUGE difference! THANKS!

Hi, thanks so much for this! I just bought a Godin LGXT, and found this video really helpful, please make more. very good!

Clear and right to the point thank you for sharing your knowledge God bless you

Bravo.Thanks for sharing your experience.

Absolutely invaluable information here... thanks so much..!!..🙏

Nice video. One of very few that explains the ‘Low Velocity Cut.’ This is crucial to learn how to edit this parameter! Thanks

I have an xtSA and am looking into getting an ACS SA...this video detailed things I know I would have spent many minutes sorting out...thanks!

Thank you so much. after shifting from the gr30 your video is a real godsend. you really saved me and my Godin multiac steel SA from a LOT of frustration. Superb video. A MUST for Godin users.

@Dr.Jekyll

4 жыл бұрын

John Morrell: Godsend.

Thank you for the great instruction.

Thank you your straight on approach

I just got this combo, thanks for your help..

thanks for doing this video it help me a lot

Very well explained. Thank you!

Very helpful, thank you. I have a Godin A5 Ultra fretless bass. Which pickup setting is best for that?

Excellent!! very helpful!!! thank you so much!

The below says there is no 'thur' to bypass completely; leaving the same volume levels ?

Hello, I think I have seen this same question by others, but I'm going to ask my own version. I just took delivery of my GR55. On my old GR30, I just hook the 13-pin cable tot he unit, then a regular chord to my amp. I can mix the sounds of the guitar pickup and the synth with the slider on my guitar. With my GR55, I can only hear the synth sounds, and the slider on the guitar does nothing. I realize I can route the piezo pickup out the guitar pickup and run it into another amp, but I would l;ike to just be able to use it like my old GR30. Can this be done? Thanks!

Very good tips! thanks

I've just bought a Boss SY 1000 ,I'll use moslty a Godin Nylon Multiac and a Godin Jazz SA, can you help with the settings or there are some video like this with GR55? Thanks

Is there any problem with latency ou low tracking in GR 55? Have someone of you ever compared this to other GRs such as 20 , 30, 33 or any other guitar synthesizer? It seems to me that GR33 sound more “fat” sound... And how about all those guitar and amp simulations? Are they really good? I mean, could someone compare to VG 88, for example? I Just can’t try one of these alive. Thanks for the answer!

excellent!!!!!!! video

I'm about to hook up a Godin Multiac ACS-SA to a GR-55 that's on its way to me in a few days so couldn't be more relevant. It's great to have a useful starting point for the settings and finally kissing goodbye to my old GI-20 that drove me nuts. Thank you.

@behaviorman1

5 жыл бұрын

Martin, have you found other good starting point resources for how to work with GR55 via Godin...just bought and waiting for Godin ASC-SA model

@martycee

5 жыл бұрын

@@behaviorman1 Hi. This video set me up perfectly and the instrument has married up with the GR-55 seamlessly ever since.

@behaviorman1

5 жыл бұрын

thank you! I can not wait to get my Godin...the GR55 is here waiting to begin its life!! Very helpful to know that the GR55 continues go b such an awesome synth since it was introduced - and that this video hooks me up. I have been a hack for several decades...now I also want to learn classical guitar, to read music and do it right!

@theliverwool

2 жыл бұрын

@@behaviorman1 hi David. Any tips on the GR55 and Godin set up? I’m about to start my journey. Thanks

@behaviorman1

2 жыл бұрын

@@theliverwool I ended up selling my gear, couldnt really figure out the GR55 and thumb surgery has pretty much ended my guitar playing...sorry.

Great video. I needed this to get my Godin tracking properly. It is 92%+/- there now thanks to this. Question. Could you please explain "Nuance" settings? This could be very helpful to me as I have an old Roland G-808, 1 GK-2 on a Strat, a GK-3 on a Taylor 314-CE (and it tracks beautifully!) and 2 GK2A's (yet to be mounted). I also have an ole GR-1 and the original VG-8; so, I am into this tracking stuff bigtime. Thanks again for your help. (Think "Nuance"... ;)

thank u so much, buddy! u save me!!

Great tutorial, tnx!

Can you put the GR 55 directly to the P. A., withoutt using a Guitar Amplifier?

Hi, do you offer beginning lesson on Roland GR55? Thank you much!

Hello, can you please make a video on How to update GR55 Firmware with USB Cable

Hi, Does it exist in gr-55 adding Harmonies in a Specific Key ( Harmonist ) as is the case with the Roland GR-33.I would ask you to give me an answer ... it is very important to me ...Thanks...

Thank´s !!!!!

Thanks a lot!

Já que é usuário do produto, talvez possa me ajudar. Essas simulações de violões, guitarras e amplificadores, vale a pena? Quer dizer, vale o preço? Você as considera honestas? Meus ouvidos dizem que sim, mas só pude ouvi-las pelo KZread infelizmente. Se puder responder-me, agradeço-o.

Hello .. I have a question or rather a request for possible help. When I write notes in TAB via MIDI (I have a Godin guitar with a 13-pin input, I connect it to the Roland GR 55 and then connect it to the computer with a midi-usb cable) using a guitar, the program records the sound "c" on the 2nd string, threshold 1. I would like so that he would write the note in a different position on the fingerboard, eg string 4, fret 10. But it does not happen. So it's not good, because the piece is recorded in the wrong position on the fingerboard. Do you know something about it? Maybe there are some solutions .. Using the guitar, I write notes in TAB much faster and more conveniently. I have been looking for a solution for several months. I am asking for a possible answer. I would be very grateful for any hint. Best wishes. MiroslaV

I wanted to ask a question. I have a godin acs sa and a roland gr 55. I can only hear the sound of the sinth, but not the guitar. Do I have to set something in the settings? Thank you

@mertman1

6 жыл бұрын

Nicola Fedele if you have two outputs on your amp you can use the guitar port on the guitar as well as the 13 pin and blend them how you like. Hope that helps

Nice video. My question is if the guitar is connected to the roland only with the 13-pin cable, and then you connect the normal jack from roland to the amplifier; or in addition to the 13-pin cable, you must also connect the normal jack from the guitar to roland. Thanks for the reply

@felixjoiamusic

5 жыл бұрын

you connect the 13-pin cable from the guitar to the roland and then the roland to the amplifier with a normal jack

Thank you KILLER vid. I have a question. How a about if you own a Godin/RMC and another gtr that's equipped with a GK-3. What would you do?

@Jkaterchannel

4 жыл бұрын

The GR55 lets you create settings for different GK guitars. In the system menu in GK settings There are numbers for the settings scroll the wheel to go to a different one you want to change.. Give them a name instead of a number once you write them. Then when you change guitars, you just call the appropriate setting.

Hello! first of all congratulations for videos. I'm having trouble setting up my guitar godin concert grand with the Roland GR55. It happens that can only operate on synthesizer volume because the pure guitar volume does not appear. That's just get the sounds synthesized via Mid cable with no possibility of playing only the sounds of own guitar. How should I proceed?I appreciate your attention.

@12nicky34

7 жыл бұрын

sidmar bordao hi there, I also noticed this on my new gr55 pedal with my multiac nylon. It didn't do it on my old gr20. I am just figuring it out but think you have to have the volume on half way on the midi control and then highlight guitar pickup on the menu and it gives you signal then when turning up and down on guitar pickup.

PREZZO AL PUBBLICO FENDER STRATOCASTER ROLAND G-C 1 GK MADE DOVE ? COLORI DISPONIBILI GRAZIE GIANNI ROCCHI FROSINONE

Não sei o q fazer, está cruzando notas só nos pianos .

@josemarioruiz666

7 жыл бұрын

+Adelmo Silva Para impedi-lo de cruzar notas fantasmas ou notas modificadas do PIANO remendo - PCM1 o escogas PCM2 acordo, dando (entrar) o TVF e TVA em ordem, basta digitar os valores para mudar: TVF = -50, +50, -50, -50, +50 +50 +50 TVA = -50 +50 -50 -20 +50 +50 -20 RELEASE MODE = 2 Algo muito importante é mudar os valores de Sensibilidade (SENS) de sua guitarra não pode ser tudo no mesmo valor.

I second this!

Por el amor a cristo hagan uno en español!!!

@josemarioruiz666

7 жыл бұрын

Luis Perez, solo sigue las indicaciones del video, lo mas importante es cambiar los valores de Sensibilidad (SENS) pero modificados con tu acción es decir como tu tocas y mas si tu guitarra es una Multiac Nylon. Para evitar notas fantasma o notas no deseadas, sigue esta configuración, entrando al PCM1 o el PCM 2 del Patch que hallas elegido y ve a los parámetros TVF y TVA modifica los valores que te pongo a continuacion y tu sonido será sin notas fantasmas o notas involuntarias. TVF = -50, +50, -50, -50, +50 +50 +50 TVA = -50 +50 -50 -20 +50 +50 -20 RELEASE MODE = 2 ESTO LO RECOMIENDO CUANDO SE USA EL PATCH: PIANO