Thank you for watching and tuning in. I love reading your comments so drop them down below ❤

Great vid mate. Regarding the flushing job, you've done what you can, you've advised them as well as Vaillant, if they don't want to go ahead I'd do the same as you, leave it up to them. That soakaway though 🤣🤣🤣

@Heatking

9 күн бұрын

Haha cheers mate, glad to know you’d have done the same! ♥️

Just a tip with the bearing plate/membrane... The red part comes off with a twist clockwise (opposite to the norm) and you don't need to take the screws off the fan unit usually.. just press the little red tab that sticks out to unlock..although maybe you did have to on this occasion to take out the broken piece ... another great upload as usual mate..

@Heatking

19 күн бұрын

Yeh on this one I needed to get inside the fan so thought it best to remove the screws mate. But thanks for the tip! ♥️

As the saying goes Dan.. beauuutiful… top job Dan as always. It will pick up buddy . There is only so much one can do. If the customer don’t want to spend the money then that’s their problem. ❤❤❤

@Heatking

18 күн бұрын

@@user-li8gr8ur8l thanks for the kind words mate. And that’s true I suppose, can’t force them to spend it 😂😂

I'm not getting many jobbing jobs tbh, I'm getting a lot of bathroom and tiling enquiries but that's it To note, I'm not gas safe, just wet plumbing and tiling

@Heatking

20 күн бұрын

At least you have some form of work coming in matey. Unless you don’t want that time of work haha

Know what you're doing I'll give you that...thankyou for the lessons and keep going.

@Heatking

17 күн бұрын

@@steviegvxr I pretend too anyway Stevie 😂 cheers mate. Hope you’re well.

Flippy flaps 🎉 vaillant love a water quality check 😂

@Heatking

20 күн бұрын

😂😂 and yes they do!! 🤦🏽‍♂️

Good vid, im sure the best location for that system filter is after the underfloor and ch returns, but before the boiler? as it looks like the UFH by-passes it. keep up the good work tho :)

@Heatking

19 күн бұрын

@@dazl7954 Daz, you’re right the filter was after the tease to the underfloor heating so only doing half a job ha ha. Well known big blue company installed the boiler.

Ive noticed that column/designer rads tend to give off a lot of rust. I usually double up with 2 litres of inhibitor to be sure. I drained a boiler the other day and the water was ginger😵🤣🙈

@Heatking

19 күн бұрын

@@russellbaldry5095 funny you should say that. Because I’ve noticed the same thing with them mate!!

The quietest June that I can remember

@Heatking

19 күн бұрын

Glad it’s not just me mate! Seems a few in this similar situation

You’re an excellent heating engineer / plumber Dan - I hope the work situation picks up up for you quickly. Another KZread plumber was saying his work had recently just dropped off.

@Heatking

19 күн бұрын

Thank you Trevor. I think it’s just the time of year, it seems a lot are in the same situation. I can look back next year on this videos if I’m quiet and hopefully realise it’s just the time of year 😂😂😂

Another good un Dan, plenty of finger action 😮😂

@Heatking

20 күн бұрын

Haha cheers Matt!

Was quieter than usual a few weeks ago but now I’m flat out with work luckily. Booked up until end of August at the moment. I do a fair bit for a builder though that keeps me busy

@Heatking

20 күн бұрын

Is it the builder what’s made you get booked up then mate?

@JSSHandP

20 күн бұрын

@@Heatking around 3 weeks is booked up with the builder then 3 weeks of jobbing and boiler installs

This time of year not much happening all round, You need to go on a holiday mate 😂😂 👍😎🤜

@Heatking

19 күн бұрын

Haha cheers Tony, holiday in 3 weeks ♥️♥️

Been a while since we had any innuendos 8:25 😂

@Heatking

20 күн бұрын

Haha ohhhh yes 😂😂😂

Condensate looks well installed with the soak away 😂

@Heatking

20 күн бұрын

😂😂😂😂

Thank you for another video buddy. Now I gotta feed the new born talk to ya soon

@Heatking

20 күн бұрын

Thanks for watching buddy! Good luck with the little one!

Diversify into air conditioning, very easy to fit and great margins.

@Heatking

20 күн бұрын

Might have to at this rate 😂 cheers mate

My works dropped off too mate. It’ll pick back up

@Heatking

19 күн бұрын

It will mate! Bring on winter!! Haha

Sites are very slow so there may be a lot of guys struggling

I think the big problem at the moment Dan is everythink is so expensive people just haven't got any money it will pick up again but it's going to take a while so when you do go to jobs you need to be looking to make your own work

@Heatking

20 күн бұрын

Yeh that’s great advice is that mate. And you’re right in what you’re saying with everything being expensive too!!

Very quiet, Unsual. July last year for me was in my top 4 of the year

@Heatking

20 күн бұрын

I’m glad we are all seem to be in the same boat. ♥️

Great video Dan, hope you enjoyed those flaps, 😂😂😂, you know me , sewer mind, 😂😂. Need a video on how to solve water bang/hammer on pipes.

@Heatking

19 күн бұрын

Cheers Paul, I’ll get a water hammer one hopefully uploaded before the years out haha!

@paulj9022

19 күн бұрын

@@Heatking thanks Dan. I have water hammer on my pipes, the guy who just serviced my boiler coming back to fit something on the pipes to stop it, it’s annoying to hear it, 😂. Enjoy your day, and keep up with the videos buddy. 😃 🥰.

Another typical great video mate, look after yourself!

@Heatking

20 күн бұрын

Thanks you buddy, and you!

@Bigdaftboy

20 күн бұрын

@@Heatking sent you a pic on messenger, make sure you’re not eating 😜

@Heatking

20 күн бұрын

@@Bigdaftboy haha ok mate! Will check it out 💪🏼💪🏼

@Bigdaftboy

19 күн бұрын

@@Heatkingdid you get it, I couldn’t see my end?

@Heatking

19 күн бұрын

@@Bigdaftboy no mate. I did look but nothing there

That Thermostat is a Salus it500. They are sh*t. It can be used as a dual programmer or just a thermostat. There’s a few common wires linking over. Should be easy enough to swap it for an Esi thermostat obviously two lol. Aux is normally dedicated to hot water. Keep up the great work 👍

@Heatking

20 күн бұрын

Thanks for the knowledge mate! I didn’t know that, ♥️

Another quality video buddy. Works definitely slower all of a sudden gorn from 7-8 jobbing jobs a day to 2-3 a day now

@Heatking

20 күн бұрын

Cheers mark! I appreciate that! And yeh it’s the jobbing jobs I love best! Haha. Hopefully they’ll come back soon!

@marksavill367

20 күн бұрын

@@Heatking hope so I find them more interesting than installing boilers rads ect I get bored with installing love jobbing about

@Heatking

20 күн бұрын

@@marksavill367 yeh me too mate, just hate the invoicing afterwards haha

@marksavill367

20 күн бұрын

@@Heatking ha true I ended up getting a card machine so it makes me invoice there and then and get paid that way it's done

Did u try opening the air vent on that magna clean🤔 I’ve had a few stuck ones over the years and that has worked quite a few times👍

@Heatking

20 күн бұрын

Yeh mate tried that too :( just couldn’t get it to budge!

@dombarnes7092

20 күн бұрын

@@Heatkingthat’s about the time I start debating whether to get Thors hammer out the van and get medieval on it👌😂😂

@Heatking

20 күн бұрын

@@dombarnes7092 😂😂 I contemplated it, but thought… best not 😂😂😂

its weird mate....can be quiet for a day or two then its mad again

@Heatking

20 күн бұрын

You’re right mate, there’s no steady ground

You saying 5 min drive 3 miles that would take me about 30/40 mins lol

@Heatking

20 күн бұрын

😂😂 that’s cause you’re down south aren’t you?

@jacko2815

20 күн бұрын

@@Heatking yea mate traffic is terrible lol

People start getting worried to spend money near elections. Its always happened no idea why but that's how things go

@Heatking

20 күн бұрын

That’s a good probable cause actually!

whats that wee bottle affair you use to dose systems via rads?

@Heatking

20 күн бұрын

It’s an spi product mate. Google search and it’ll come up :)

@davehunter6920

20 күн бұрын

@@Heatking thanks mate

DTG Plumbing? Is that Mr Heatking's alter ego?

@Heatking

20 күн бұрын

That’s my official business name, the central heatking is my online name, didn’t want to use my business name incase trolls get hold of it haha

@TheTimBullimore

20 күн бұрын

@@Heatking Hope I haven't blown your cover...

@Heatking

20 күн бұрын

@@TheTimBullimore I’ve blown it myself by the looks 😂😂😂

🤘😎🤘🫖☕️🍪🎥👍👍

@Heatking

20 күн бұрын

Good evening Lord Wayne

@SuperWayneyb

20 күн бұрын

@@Heatking🤣🤣🤣🤣🤣🤣🤣