Which one should I get if I am only buying 35s.....asking for a friend

@jdjames997

Жыл бұрын

LOL!

@richt5986

Жыл бұрын

This made me laugh 😃

@BasementBrandon

Жыл бұрын

All of them.

@NoFate247

Жыл бұрын

@@BasementBrandon correct ANSWER #35smatter

Love the honesty and up front assessments. Keep up the solid work. When I look for equipment assessments, I think of you first. I always appreciate your cut on things. Thanks B

@BasementBrandon

Жыл бұрын

Now just need to find a way to lift them all 🤓

Can’t wait to watch!

@BasementBrandon

Жыл бұрын

👀

Good review there. I am all in on a new set of Strength CO plates by the end of the year. Your review solidifies what I already knew. That Strength CO products rock. Thx!

@BasementBrandon

Жыл бұрын

Don't think you'll be disappointed.

Awesome vid. Love the equipment/gear comparison/review stuff.

@BasementBrandon

Жыл бұрын

appreciate you taking a look!

Thanks for the plate review. I hadnt thought about the lip on the plate making the rogue plate difficult to handle.

@BasementBrandon

Жыл бұрын

Def a con for calibrated style plates!

Covered all the bases! Two of the only modern plates I'd suggest worth the money explored from various perspectives. A must watch if shopping for new iron!

@BasementBrandon

Жыл бұрын

appreciate the feedback!

Effing great video. I have strength co change plates and USA made rogue deep dish 45s 35s and 25s and I've learned so much in a short time. I'm grateful you talked me out of the bumper plates cuz I don't normally drop my sh!t. And I recently learned through some Google searching seeing photos of your plates on the bar facing inwards. Keep up the big work. And the funniest hell innuendos. 😈

@BasementBrandon

Жыл бұрын

Thanks Bryan, appreciate ya.

Own the Strength Co plates and couldn’t be happier. Easy to tote around and load up a bar and they look great. I’m sure the Rogue is excellent too, but my plates fit all my home gym needs.

@BasementBrandon

Жыл бұрын

Right on

Look who finally found a good use for his trolley arms! Wish I could support Grant with a Strength Co plate order, but my rubber coated plates are exactly what works for me in my tight space. Nice review!

@BasementBrandon

Жыл бұрын

Haha first time it's been used in a while.

Used the Rogue plates for years in the gym and they were okay. When I built my home gym went with the Strength Co plates and they are such an upgrade. Tight tolerances on the bar so I don't always need to use collars. Easy to handle. Look great!

@BasementBrandon

9 ай бұрын

Awesome! Which Rogue ones did you have?

Dang this was a great, in detail and thoughtful review

@BasementBrandon

Жыл бұрын

Thanks for taking a look!

About a year ago, I had a home gym that rivaled yours. Now...I have a squat stand, bench, plates and a few bars. It's working out better for me, but I'm not a serious lifter like you. Continued success to you, Brandon.

@BasementBrandon

Жыл бұрын

Thanks my friend. Different strokes for different folks, but at the end of the day you can have a super effective set up that's quite minimal.

I have a bunch of old York plates (milled) that I bought in 81 or 82 so I'm with the Strength Co. style. As you say, much easier to handle and I can get a shitload of Yorks on my Rogue Ohio Power Bar. Actually, now a days, more than I can lift. I still love the "clang" of those plates. I also have Rogue bumper plates as well as a bunch of Rogue Hi-Temp's which I use outdoors. Great review/video. Again I'm with the old school look and design of the Strength Co..

@BasementBrandon

Жыл бұрын

Right on! Those old Yorks are great!

I almost got the rogue Olympic plates because I love the way they look, But with the handles that the Weight it Out plates have is a game changer. And they’re even thinner. Great video Brandon 👌🏼

@BasementBrandon

Жыл бұрын

Those do look cool, i had the same hesitation you've experienced with the sway of them after rep work.

@RoryEllisMusic

Жыл бұрын

@@BasementBrandon The excessive slop is by far the most annoying part. I did find an easy but not ideal way around it though. I just put one of my urethane 55lb bumpers on first and then there's zero movement. But again, it's not an ideal solution. My other gripe is that there are no matching change plates.

All I'm hearing is I need more plates. Thanks, I'll let Wynie know this is your fault.

@BasementBrandon

Жыл бұрын

Just sell some benches to fund.

@GlucksGym

Жыл бұрын

@@BasementBrandon absolutely not. More benches.

Ordering the strength co today. Thanks Brandon

@BasementBrandon

3 ай бұрын

Nice! Let me know what you think.

Great comparison Brandon! I 100% agree, the handling is the end all be all between these two.

@BasementBrandon

Жыл бұрын

Great, now I don't know if this is Sam or a tribute account.

@Iamsampresley

Жыл бұрын

@@BasementBrandon ha I wish I was that cool, I’m going to start pushing some content around my fitness journey. The people of asked so I must deliver haha

I just got a set of REP old school iron plates. Going to slowly switch them out for the Strength CO’s once I can lift enough and make a little more money!

@BasementBrandon

Жыл бұрын

Right on!

Both are good looking plates but the murdered out comp style plates 😍😍😍😍 they are BEAUTIFUL. Great insight Brandon!

@BasementBrandon

Жыл бұрын

Don't feel attacked by the deep dish comments :)

@babygiantbarbell1014

Жыл бұрын

@@BasementBrandon no absolutely not man what you said is all true. I love them and would pick them again, but I am running into space constraints on loadable sleeve space myself so I understand completely! Good complaint to have but still!

Speaking of the Rogue change plates. I’m still waiting for the 2.5 plates to come out. I think it’s been on my list since January!

@BasementBrandon

Жыл бұрын

Yep!

I got the Rogue Olympic Plates because they were the best compromise between two competing interests I had. I wanted something close to calibrated powerlifting plates (accurate and thin). But I'm not the only one who uses my plates and I didn't want to make them do kilo math.

@BasementBrandon

Жыл бұрын

Right on!

Hey Brandon. I always look enjoy and look forward to your videos. I have a question for you but it doesn't pertain to the weight plates . I don't have anyone else to ask and I know you usually respond . Also , I really respect your opinion and insight. Ok , my question is ; do you think that Reebok legacy lifters are ok for deadlifts at 22mm or .86 of an inch? I have used many shoes through the years , as well as flats , but never a shoe this high . Do you think it's ok to give it a shot or just stick to a lower heel ? I'm in this spot because I am really loving these legacy lifters for squats . Anyway , thanks Brandon and I would really like to hear your thoughts on this.

@BasementBrandon

Жыл бұрын

A lot of people who do Starting Strength tend to wear oly shoes to DL in. Personally I think they pitch you a bit too far forward. What I would suggest is get some change plates (2.5s or 5s) and put those under your heels to simulate what it would be like. If you're cool with it, go for it (assuming you don't own already). If you do own them already, doesn't hurt to try.

I love rep's equalizer plates. Have had them for a while and no issues. Easy to grip and are pretty accurate with the weight.

@LL-tz8lo

Жыл бұрын

made in china tho

@BasementBrandon

Жыл бұрын

I did like my Urethane ones I had, but wanted to try to get as much made in USA as I could.

Both look great. I just switched all my plates to York deep dish. I got 4 sets.

@BasementBrandon

Жыл бұрын

Nice!

I can also attest to the fact that I have been waiting forever for them, but I have never seen Rogue post some change plates for the Rogue Olympic Plates.

@BasementBrandon

Жыл бұрын

Strange!

I had the Rogue deep dish and sold them and replaced with the Strength Co. Good move on my part. Rogue plates are beautiful and make a great "clanging" bell sound, but my biggest problem with them was their 25s, which have almost no lip and are easy to drop on your toes. The Strength Co. 25s (and all denominations) have a great lip and are easy to handle.

@BasementBrandon

Жыл бұрын

I will say I do have a pair of Rogue deep dish 35s as Strength Co didn't offer then initially!

Solid. Same reasons I sold rogue for full set of StrengthCo

@BasementBrandon

Жыл бұрын

My man

I have had a home gym for two months and went with Rogue's USA Olympic due to their look and super thin, second to Weight it Out. They are HARD to pick up and move around and wish they had handle like Weight it Outs. Just got xMark's weight tree and its easier to load up barbell now and getting Baadass handles and magnetic pins so will be happy to have heavy and THIN dumbells once they arrive and with magnetic pins can kick off 10s on each side and do fast drop sets!

@BasementBrandon

7 ай бұрын

Nice!

I bought my last set of plates during covid when no-one had anything. I ended up with black Troy deep dish type plates. I have no idea where they're made. Good review I'd buy strength co if I was in the market

@BasementBrandon

Жыл бұрын

Troys are nice!

Excellent video, thanks! Do you have any as-bought accuracy comparison numbers? I’m sure I can get the published numbers from their web-sites, but the actual hardware is a better data source.

@BasementBrandon

Жыл бұрын

I think the (16) 45s I have from the strength co are closer to 20kg (44.7) on average, still within tolerance. While my Rogues are right around 45.1

@martystrasinger3801

Жыл бұрын

@@BasementBrandon Thanks. I have some pricey plates that are within 1/4 pound of 45, and some older budget/entry level plates that are all over the place. However, I was lucky that the budget plates actually worked out to be in good pairs so I can load the bar evenly. Pair of 45s, pair of 44.75s, pair of 44.5s. I just wrote actual weight on them with a Sharpie to keep track. And one mismatch- a 45.25 and a 44.0, which I just keep on the plate storage tree to help the stability.

I love both. would you consider the deep dish rogues over strength co plates for deadlifts at home if you didn't have bumpers?

@BasementBrandon

Жыл бұрын

No. The deep dish still take up more space with not much return IMO.

@MetalsForBrunch

Жыл бұрын

@@BasementBrandon I'm stuck at the 3 plate club. I'm not worthy.. 😂

Can you make a video on how you hang the flags or tapestry on the concrete walls? I’m looking to do the same

@WildCatLyfe

Жыл бұрын

What worked for me after hours of trying to figure out how to do so without puncturing the US flag in any way, was using tarp clips from harbor freight!

@BasementBrandon

Жыл бұрын

I can try to do this, the flags I use hook screws, the banners I use gorilla tape. I think I have a video on that one already!

@WildCatLyfe

Жыл бұрын

@@BasementBrandon I tried this and it didn’t work for me! I saw the video and the gorilla tape stuck to the walls (ripped the paint right off) but would not adhere or stick to the flags at all (polyester) so the tarp clips being screwed into the wall, with the clips themselves holding the flag, worked best and they weren’t expensive at all. Might be due to my gym being in a Arizona garage, too, instead of a likely temperature controlled basement. I’d be interested to see the follow up video either way! 😁

@BasementBrandon

Жыл бұрын

@@WildCatLyfe Yeah I prob wouldn't suggest the tape on flags (or even banners) on non concrete walls. If you have drywall or something similar, nails/tacks/screws would prob be the best route!

Another thing to consider is the Rogue weight tree will only hold 5 Rogue Deep Dish plates per sleeve.

@BasementBrandon

Жыл бұрын

Good call!

FWIW, the Troy machined plates (the ones with the triangles, come in grey or black) are also a medium deep dish (compared to the Rogue, which are very deep dish). The Troy's are therefore also easy to handle. Not as nice a finish on them as these two, though. The machining is decent. Pretty tight on the bar and won't scratch it off.

@BasementBrandon

Жыл бұрын

I agree they are nice, but I believe they also have a higher price point for what I would consider not as nice of a finish, but I could be wrong!

@richardmather1906

Жыл бұрын

@@BasementBrandon I agree. When I bought my set, right before the pandemic hit, they were cheaper than the Rogue machined plates. From what I have seen now, not so much.

What’s the best sleek/thin plate that you’d recommend for two pairs? I need some heavier plates for my reverse scout hyper

@BasementBrandon

Жыл бұрын

Comp plates will be your thinnest option. However I know some people actually like 35s for hypers b/c it has a smaller diameter.

Finally!

@BasementBrandon

Жыл бұрын

Woo

Awesome haircut!

@BasementBrandon

Жыл бұрын

😝

I've been waiting for the small rogue plates to be available too :(

@BasementBrandon

Жыл бұрын

Never coming 🤪

I see Bells now has deep dish E coat plates and at least in Canada, they are well priced. Looks like a great option. Shipping kills, however. Too bad they couldn't come up with a bulk free shipping option like another company in Canada, wherein if you order $2000 or more, it's free.

@BasementBrandon

Жыл бұрын

Yeah here in the USA they're priced in line with these options and usually the QC is worse. I prefer to get made in USA if possible and not Vietnam. If they were priced lower they'd be more appealing (obviously)

@ExpeditionaryRanger

Жыл бұрын

I envy your options! I will say I have a few of the regular gray machined steel Vietnam plates from them and the +\- 1 percent held true and they are tight tight tight on the bar.

Great review, B! What happened to the day of 50 cents a lb? 😢

@BasementBrandon

Жыл бұрын

You'd be lucky to find rusted out plates for that much these days lol.

@ClarksvilleBarbellClub

Жыл бұрын

@@BasementBrandon My neighbor has some plastic weights from the 70s filled with concrete. I've been eyeing those babies. Hope to see them in the next yard sale! 🙏

what would u rank the usa rep equalizers vs deep dish vs strength co

@BasementBrandon

3 ай бұрын

I've only used the urethanes (which were nice). But my general impressions of the MiUSA is they're nice. One of the only iron grip plates made in the USA you can get, priced well (but higher than TSC or Rogue). I still prefer a beveled edge like the Ivanko or Rogue Six Shooter use, but if you like the aesthetic they're a good option.

Strength Co. Plates are sharp, I would go with those if I was in the market for plates. Started my home gym before they came out but for newbies, I don't see how U could go wrong with the Strength Co. Plates

@BasementBrandon

Жыл бұрын

Right on! What plates do you have currently?

@bobbyhunt3009

Жыл бұрын

@@BasementBrandon I have cheap fitness gear plates, the ones that have handles from Dicks sporting goods, I built a home gym for 4 of us in my storage bldg behind my house, we all wanted plates with a handle so I went with those. I know they are no where near the best quality but I did save a bunch of money. My gym is made up of all REP equipment except the plates. I was going with REPs iron plates but they did not have the handle and all the guys talked me into it. I'm not proud of my plates so I have been looking into upgrading and selling mine. I think the Strength Co. Plates are sharp, handle or no handle

Is it really that bad grabbing the rogue USA? I was dead set on them for the close to competition and being blacked out. I also think for home gym attachments like a lever belt squat I could get an extra 4 plates of the thin rogue on compared to the strength co. Same with the trolley pull down system I’m getting. With the sets and free shipping it’s about 200 more for the rogue weight I need. I’m also not excited about super tight fit because it’s a pain I. The ass getting my old school weights off the bar because my space is only 10 feet wide I can’t get on the side of bar to pull straight out. Might be a nightmare with tight weights.

@BasementBrandon

5 ай бұрын

It's not bad, it's doable, but just something to consider.

@bnorth7213

5 ай бұрын

I will and ty for all the great content. Happy new year 🤙🏻

Is the shipping on your Strength Co plates still $56? I don't know if this was recorded before or after they reduced the shipping costs. The charge on a pair of 45s for me is $21.

@BasementBrandon

Жыл бұрын

I've had these for a few years, so before they updated shipping!

Have you seen the Weight it out Plates? They are American made but they look way different than any other plates. More of an acquired taste.

@BasementBrandon

Жыл бұрын

I have. They look pretty cool but not super refined. I do like how he can customize them for you to if desired.

How is the hole fit? Strenght Co. has this as a selling point

@BasementBrandon

Жыл бұрын

Both very tight, but since strengthco is thicker, it feels more secure.

They're both sleek looking plates!

@BasementBrandon

Жыл бұрын

💯

I'm all about the girth of the grip on the strength co plates. When you own exclusively 35lb plates you need to do more loading and unloading so the grip is critical. Long live 35s.

@BasementBrandon

Жыл бұрын

My man

Of all the plates you've owned, which have been your favorite?

@BasementBrandon

Жыл бұрын

To this point, the Strength Co ones. Great mix of aesthetics and function.

Storing those deep dish plates can also be a pain.

@BasementBrandon

Жыл бұрын

💯

I got all 45lbs for the rogue plates. I like how thin they are.

@BasementBrandon

Жыл бұрын

Right on

Do you miss the ease of handling of the rogue six shooters you used to use.

@BasementBrandon

3 ай бұрын

StrengthCo are just as easy

@jerseyjim9092

3 ай бұрын

@@BasementBrandon thanks.

What’s the benefit of a pair for $350? I don’t get it? Is it just status ?

@BasementBrandon

Жыл бұрын

Usually with more expensive plates you're paying for accuracy, tolerance, finish.

I bought 135kg of iron plates from Force USA for $270AUD. Quality & design is awesome and end result is exactly the same. 4 x 20kg + 4 x 10kg + 2 x 5kg + 2 x 2.5kg plates.

@BasementBrandon

8 ай бұрын

Thanks for the info!

Rogue is most popular in India .... Nice video 😌

@BasementBrandon

Жыл бұрын

You can get Challenge in India too can't you? Formerly IPF approved!

I heard the Strength Co. plates are the go to plates of the Massenomics gym

@BasementBrandon

Жыл бұрын

I want to go to them now!

I don’t understand why anyone would get the rogue plates. If I wanted to spend that much money I would get the calibrated weights for the color and accuracy since they are the same price.

@BasementBrandon

Жыл бұрын

Some people really like the look, function, and the fact they're made in USA

@Denali_Rebel

Жыл бұрын

@@BasementBrandon I guess. I’ve always liked the color of the calibrated weights myself plus I like the added accuracy is nice (not that I necessarily need it).

@BasementBrandon

Жыл бұрын

@@Denali_Rebel Oh def get it in that case. Prob be cheaper too. Rogue has teased calibrated color correct made in USA plates which use these as a base, but no idea when they're coming to market.

code basement didn't work ;)

@BasementBrandon

Жыл бұрын

Basement will save you 10% on StrengthCo bars, but otherwise neither company offers a discount :(

Did not realise the Rogue's were the same price as calibrated. Wut. I thought that was the whole point, they're a cheaper alternative to getting the real thing. How silly

@BasementBrandon

Жыл бұрын

I think the price difference comes down to made in USA (olympic USA) vs China (current calibrted)

Glad to see you blocked out your address!! Great review, looks like you can’t go wrong w Strength Co.

@BasementBrandon

Жыл бұрын

I'm a fan!

How did you know I’m OCD? 😆😆😆

@BasementBrandon

Жыл бұрын

We have a lot in common!

Come on man don’t post your address up on here lol.

@BasementBrandon

Жыл бұрын

You’re not going to send me lavish gifts?

I just bought a brand new set of plates because of you 😡

@BasementBrandon

Жыл бұрын

Good luck with import fees lol

@joemacedo782

Жыл бұрын

@@BasementBrandon No way i'm buying these plates lol, import would be 2x the cost. Just decided I need some matching plates for OCD reasons.

instead of obsessing over plates,just LIFT!

@BasementBrandon

7 ай бұрын

Why not do both?

rogue's like a trophy wife, strength co is the semi-hot girl next door always ready to go

@BasementBrandon

Жыл бұрын

I actually think the strengthco look better lol.

1st!

@BasementBrandon

Жыл бұрын

🥇

Rogue is much better...

@BasementBrandon

Жыл бұрын

Not in this case IMO.

Not a fan of the rainbow trees

@BasementBrandon

Жыл бұрын

😂

did you just made this video to brag about how much you lift? 585lbs is about 90% of the normal population can't lift .LOL

@BasementBrandon

Жыл бұрын

Not at all, my point is more to challenge the argument that a person cannot lift enough weight that a wider plate would ever be a problem.

The strengthco plates listed at 17.75 inches in diameter are .85 mm too big 🥲

@BasementBrandon

Жыл бұрын

Gonna have to get rid of them now!