It’s the way you drive Carl.. it’s the way you drive…

I put a 120amp/esc using a 4s battery and its amazing

@williampalmer1358

15 күн бұрын

I got one but haven't put it in yet..Woohoo!!

Hi mate I've had to change my controller because my antenna tip dropped off. And put GT5 controller and receiver. And put a castle mamba pro esc so I can go 4s and thicker centre differential oil. Great video mate 👍 😂

Not for nothing but the reviewers who were reputable and gave this truck a huge thumbs up are going to loose alot of credibility due to the Omni not being the best RC ever. I already have stopped following all the ones that sang its praises and I imagine others who feel a bit cheated will as well. Thanks for making this video I thought I was the only one who did not see this car as the so called Holy Grail its fast but so is the Mini E Revo and for the same money and a support system that you can call and ask questions, I reached out to the support by Rlaarlo so many times I can recite their phone number by heart, again thanks for telling it like it is...oh yeah I've tried to order parts from the company and I wasn't able to get any.

I ordered alloy stand offs and diff cups from the beginning. Also, I drilled out the wheelie bar attachment holes and put a heavy gauge screw in and zero problems since. Also, don’t listen to them about moving the esc… they make tons of 3s-.4s higher Mah batteries that fit perfectly without moving nothing. Do what I said for upgrades (which is peanuts) and enjoy your vehicle

@CSL33

3 ай бұрын

Any issues at the other end of the axles, wheel shafts issues?

@RC-Closer1313

3 ай бұрын

@@CSL33 axles are rock solid !

@CSL33

3 ай бұрын

@@RC-Closer1313 Thanks. Surprising that the dif cups are weak, yet the wheel cups at the other end which are also a dog-bone setup in the rear holdup just fine?!

@RC-Closer1313

3 ай бұрын

@@CSL33 it is an anomaly

@CSL33

3 ай бұрын

Have you gotten those stand-offs and diff cups yet? Mine haven't even shipped after 3 weeks! 😠

Apparently for the diff cup if you adjust your droop it will alleviate the pressure...

I found mine has a bent center drive shaft, and the diff cups are showing wear already after only a couple packs run though it.

@CSL33

3 ай бұрын

Yeah, need to limit the throttle when in the air, i.e. when suspension fully extended, unless you get the upgraded cups that they sell. Be prepared to wait weeks before they even ship them out to you though!!! 😠

Yes I bought due to the small size and great power in lil package but my front wheels are wobbly

Lots of defective cups and drive shafts all mine are bent and the rear left is so bent on jumps it runs against the sway bar

Does your's drive straight? Mine doesn't, it veers to the right. Is it damaged out of the box, or can I make some adjustments?

@SuperShutthefukup

Ай бұрын

Adjustments on the transmitter

Did you checked your diff fluids? I added 100k to the front and rear, and one million (because i couldnt find 500k in my country :D ) and after 2 3s batteries the cups are like new. Also i found out, that the bearings inside the hub are low quality, and they are half seized after first bash so i oiled the little ones, they were fine, and i changed the bigger ones for sealed bearings from my trx4. Bear in mind, that im running my truck on 100C 3s batteries, and i changed ESC to hobbywing 10BL120 with punch to the max :D. And that wobble thing with the wheels is maybe because the holes are installed in the rims itself and not the tires like they should be.

Put the traxxas rubber wheelie bar wheels on, or at least the slip on ones.

Conclusion is should i get one, i don't want always fix it after running it thanks!!

@CSL33

3 ай бұрын

No one can tell you that. Watch and read and make-up your own mind.🧐

@user-ys5of3fq3f

3 ай бұрын

Yes, bro, i see! Thanks again!

I’ve watched almost every video on KZread & all other media sites & I’ve only heard of one coming with a rear reversed dif but these are coming from people that got the first models. I’ve not seen any of a lot of the other issues your mentioning due you have any reference to certain videos? There is no perfect RC but for the price of the Terminator your getting more for sure it’s very well made. The body mounts could use some pads on them. I think you are way overthinking everything go out n run it have fun & then see what breaks because it appears you haven’t broke anything? But your just warning people what may happen 😂

@OmniMan_Racing

3 ай бұрын

I've broke shock standoff screws and bent the rear shock tower. Other than that and diff cup wear it's been pretty solid. Problem is if it breaks and I need a replacement part the truck might be down for a month before Rlaarlo sends replacements unless parts have become available on Amazon already

Damn. A lot of issues. Who wants to buy mine? Lol

@OmniMan_Racing

3 ай бұрын

....might be worth buying for the spares 🤣

@bryangadson-me9eh

3 ай бұрын

Same only diff cups issue's and causes dogbone failure

@CSL33

3 ай бұрын

@@bryangadson-me9eh Any issues at the other end of the axles, i.e. wheel shaft issues, whether front or rear?

@bryangadson-me9eh

3 ай бұрын

Naw just the diff cup and dogbone pin at diff cup driverside rear is worst but all show signs of pre mature failure, I like the truck but to fail too soon under no bashing ​and rlaarlo trying not to accept return but im relentless with them standing behind there product,and return policy @CSL33

@CSL33

3 ай бұрын

@@bryangadson-me9eh Rlaarlo does have potential in breaking the 'China' engineering perception 'mold', but they may more than offset that upside with some of its management decisions and other strategic directions on their retail sales side of things... Yeah, the rear dog-bone cups at the wheels do seem beefier than at the diffs! Thanks!

Im new to the hobby and i must say , i see a lot of foolish things being done , i mean i get what they're trying to prove because most of us will never do the things we see them doing but at least we get an idea on how hard to push vehicle

@OmniMan_Racing

Ай бұрын

Someone has to be the person that's dumb enough to test limits 🤣