That'll make a nice little dust collector! Great restoration!

What a great upload. I thoroughly enjoyed watching this and learned lots. Thanks for sharing ATB

I LOVE THIS VIDEO AND I DON'T EVEN KNOW WHAT A RING BLOWER DOES!

Vc tem .meu reapeito. Parabéns

3:12 - WALL-E's eyes! Good to see that the aluminum impeller itself hasn't been damaged at all hence sucking in cloth fibers and other debris. Great job on the restoration process! 👍

Nice job, looks & sounds good. Nice to see that you installed an Earthed cable to it. Might have been a good idea to carry out Earth continuity & Insulation resistance tests to ensure safety, Before putting it back into service.

Este estava mais fácil! Tudo limpinho e novo por dentro. Ótimo serviço.

Great job

Very useful vedeo !

Great job...On the restoration and the video editing!

Gave it a like for the test at the end, I knew there must be a purpose for those super cheap anti static things.

How skillful you are, bro!

Super talent

why is this kind of video so damn satisfying to watch.

Well done always enjoy your work

Indeed great job.

What a great job man.

Hi the4😎, that's pretty cool. Been able to recycle something into something new. And it's was a good deal $25.00. I like the videos keep 'em coming.

You have tool great!

@duyxuan7048

5 жыл бұрын

Anh Nguyen Sign up for your channel, thank you very much

Good very good .. it is so nice and enjoy. I hope best wsheis for you

Nice👍

Love that color

Well done good job.

Ball bearings with the hammer!?!? Great way to reduce their life.

@demetrijohnsonssirenvideos3590

3 жыл бұрын

Definitely

Amazing

Nice restoration! Sounds like an air raid siren. It ain't over till the fat Ho Hsing, I guess... 😸

@Miss_Toots

5 жыл бұрын

getyourkicksagain ....it aint what now???

بارك الله فيك يا بطل العالم

Super bro

Chẳng hiểu sao mình rất thích video của bạn

Beautiful work! Does the primer need to dry completely before applying the color Cote or does it just need to flash? Thank you.

Nice siren restoration

The part numbers for the bearings are 6202z and the shaft seal is 20x30x7 for those of you who's aerator pump died like mine did

This is fuckin' hypnotic. I can't quit the video once started. 🤔🤣

Well done

Good 👍👍👍

Very good restoration bro 👍👍👍👏👏👏

🤗

Nice work.

Nice

With that inpeller, it looks like it could pull a bit of a vacuum as well.

@douro20

4 жыл бұрын

That's one of the major uses of regenerative blowers.

Отлично))))

Nice job pal

Nice editing.

nice job bro

A little bit fast sometimes but awesome work, as usual !

👏👏👏👍👍👍👍

Nice work

0:02 пока начал смотреть это удовольствие скажу сразу видос супер по полной. Ну кароче приятного всем просмотра👍👍👍

Good video, love your channel. Would prefer using original paint colors. the silver for this one, and red for others, is not good looking I think.

Great paint, what kind is this mettalic color?

I can see why you didn't change the ball bearings, but the cap MUST be replaced.

Good work 😚😚😚😚❤❤❤❤❤

Not bad

Я бы перед сборкой проверил конденсатор ESR-metr.

Hmmm new to your channel. I want to know did the item work prior to the job being completed with just new paint and cleaning. I didn’t notice even new bearings was put on or checking if the armature had continuity or even a inspection of the coils wrapping or anything don’t believe this was as you wrote a restoration I believe you just cleaned it up and made it pretty

@CivilDefenceCanada

5 жыл бұрын

Dude this is a POS made in China blower. It was probably $20 new.

@brooklynsnowman8427

5 жыл бұрын

Could be however just saying it’s no resto maybe a resurrection.

@stormkhan4250

5 жыл бұрын

@@CivilDefenceCanada actually I looked up the maker of this thing and its a Taiwanese company that's been making these since 1961. This thing looks about 1970's or 1980's vintage.

@philanna38

5 жыл бұрын

WHAT EVER!!

👍🏻👍🏻👍🏻👽

Вот нравится мне когда старой технике дают вторую жизнь сам тем же увлекаюсь

@TOP19809

4 жыл бұрын

а почему ты решил что она старая?

wow another cpu cooler i think

@LeaderofStupid

5 жыл бұрын

Helluva cooler

did you tested it on 110v? because its a 240v Motor.

не такой он уж и старый был для реставрации, я так каждый день что-то реставрирую. Пыль протер- отреставрировал

자꾸 보게되네

Bom dia Like

Qual a finalidade deste equipamento? Não entendi pra que serve....

NIce. But don't get it how " I will use it for dust collection system in my workshop."?????

Is it for aquarium use

When you will upload your next video?

Tragen Sie immer speziellen Wickellack. wenn ein alter Motor renoviert wird

9:14 OOOOWA

😎😎👌👌😎😎👌👌😎😎

You need to use a steel hammer for the impact screw driver to function.

Hammerite paint would have given the finished paint look tons of "Western Quality" that an original Chinese tool never had. I would have tapped out or filled the small dents in the junction box cover and the small fan cover, too.

@douro20

5 жыл бұрын

Taiwanese, not Chinese.

@munched55

5 жыл бұрын

@@douro20 My reference was more to quality than country of origin. Taiwan just supports my point.

Кароче, только корпус шлифанул. А так все рабочее

@timurgimt5483

5 жыл бұрын

А где он используется?

@AlekseiVasilich

5 жыл бұрын

@@timurgimt5483 Везде,где нужен воздух и вакуум

@timurgimt5483

5 жыл бұрын

@@AlekseiVasilich А какое максимальнольное давление?

@AlekseiVasilich

5 жыл бұрын

@@timurgimt5483 Не могу сказать.Но в типографском оборудовании используется точно

@munched55

5 жыл бұрын

@@AlekseiVasilich That explains all the ink coming out of the filters when cleaned.

кхе кхе, не боюсь показаться незнающим, что это за сей агрегат? воздух засасывает, проходит через фильтра и на выходе чистый воздух выгоняется? На турбину похоже. Для чего эта штука нужна?

I can see the bearing being the first problem to pop up

@douro20

4 жыл бұрын

That's the most common failure mode of this type of blower.

It sound like an ambulance

@duyxuan7048

5 жыл бұрын

Eddy Metal DIY subscribe to Duy Xuân TV

Porque você não pinta de outras cores

neat video, but that silver colour is no good... also what kind of shape is that capacitor in?

@davidalonso7514

5 жыл бұрын

true, It looks like a slicer

6:58 حي على الصلاة حي على الصلاة

cordless drill machine ripare

Sandblasting would probably save you some time

I like when in restoration they "restore" the item, like for example painting it back to a paint similar to the old one...

No, switch? Did I miss something?

Now all you need is a bouncy castle 👍

That's not a restoration, that's just a PAINT JOB !

@TheBeaf

5 жыл бұрын

I usually don't comment on "restorations" like this, but I have to agree... it really was just a cleaning and a paint job. You didn't remove the stater and test it, you didn't show any work done on the armature, and you didn't (I assume) replace the brushes so i wouldn't even consider this a tune up and no "body work" was done. Furthermore, the "poor-mans chrome" paint is usually a very poor choice. It looks cheap. A dark green or blue would have been a much better choice (IMO). On a positive note, i appreciate when anyone takes old tools and gives them a second chance, but you gotta call it like you see it. This simply IS NOT a restoration.

9:15

good video but i would like that you had used new bearings

👏👏👏👏👏👏👏👏👍👍💯💯🇧🇷

Sign up for your channel, thank you very much

Great job but..can you make the film little bit longer? Show us little bit more, please

Good 🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷🇹🇷

Maybe 37 people can buy a new ring blower by their parents money....

Не такой то уж он и старый

What, you've run out of things that need restoring?

Ma scusa , come pretendi di asserire che hai messo a "nuovo" la pompa senza neppure aver cambiato un cuscinetto ne il condensatore elettrolitico??? Al massimo puoi dire che l'hai riverniciata.

How to make a little machine beautiful and ruin a terra cotta floor at the same time!

все хорошо, но с подшипниками он сурово....

Those running a blacksmiths shop would have that off you straight away...

Do you have an email address? I’d like to contact you about something

А реставрация то где?

Swich on/off needed.