Thank you for sharing 🤗🙏🇺🇲😎

That place is amazing...the people are great..they wasn't open when we needed a drive shaft but he met us there and helped us out.

@CrashCitySxS

Жыл бұрын

They are good people for sure

front and rear diff look to be different ratio... cheap fix is different size tires front to rear. looked like the front was underdriven so a slightly taller tire out front would fix the binding issue that is causing heat. new sub here.

@CrashCitySxS

Жыл бұрын

Thanks for the sub! We’re gonna go back to stock internals maybe with some upgrades and roll with it. Maybe save up for one of the hill killer diffs. They seem to be legit!

Hey guys! So sorry for your issues. I got my gear reduction done thanks to y'all's great Pro XP video. Going to Royal Blue in 2 weeks. Then Windrock next month. Wife and I would love to meet up sometime if schedules line up.

@CrashCitySxS

Жыл бұрын

It happens! More fun than being at work!

Like the wrap sorry for your bad luck I also live about 30 minutes from there I like watching your videos

@CrashCitySxS

Жыл бұрын

Thanks! We’ll be back down there maybe we’ll see you!!!

My buddy runs a full spool in his buggy and I just installed a full spool into mine haven’t got to test it out yet I also am running a rcv driveshaft hope it doesn’t destroy that thing.

@CrashCitySxS

Жыл бұрын

Keep it off the asphalt for sure!! Some people have told us they’re having good luck with it. Hope you have the good luck!!!

Ugh that sucks im be buying one of your clutch kits as well

@CrashCitySxS

Жыл бұрын

Hey thanks! We appreciate that! Hoping to have them available-fingers crossed-end of the week!

My fave is Tackett! ❤

@CrashCitySxS

Жыл бұрын

We need to get down there again!

Just found your videos. She’s a badass out there welding no gloves.

@CrashCitySxS

Жыл бұрын

Whatever it takes to get it done!

So my rzr doesn’t have problems with the spool but a buddy of mines got hot last ride

@CrashCitySxS

Жыл бұрын

That’s good for you and bad for him lol. Y’all had them in there for a while?

Bounty series and pavement don't mix with spool

@CrashCitySxS

Жыл бұрын

Lol. I’m not sure that the spool mixes with any trail rig but idk. Watched blown budgets last video and saw they were having ujoint problems with the spool it seems too🤷‍♂️

@CrashCitySxS

Жыл бұрын

I don’t think we had a total of 5 miles in two days on the pavement.

Please everyone hit like it helps Amber and Steven and we love them ❤❤. Please and Thankyou.

@CrashCitySxS

Жыл бұрын

Thank you Sharon!! Love you too!!

While Sprinkles is parked you'll have to let Amber rip "Tinkles" I'm gonna make that stick.. lol

@CrashCitySxS

Жыл бұрын

🤣🤣🤣🤣🤣

VGG for the win!!

@CrashCitySxS

Жыл бұрын

Hayat ssss!!

Super bummed it went they way it did. So sorry that you guys spent all that money and time and only got Mexican food and mud. Thank you for coming out though. I sincerely mean that. I’ll head your way next time!

@CrashCitySxS

Жыл бұрын

Lol. It’s all good. No worries!!! It sure beat a couple days at work for sure!! We for sure want to meet up with you guys and ride again!

@bprguy2003

Жыл бұрын

@@CrashCitySxS that’s good to hear. When I heard amber say when I have a bad experience at a place I never want to go back… I was like welp. She is never going to want to see us again 😂

@CrashCitySxS

Жыл бұрын

No not at all!! You’re our people so we always got your back. She’s currently boycotting Walmart because they ran out of her coffee creamer but she has to go there today to pickup a cake lmao

@bprguy2003

Жыл бұрын

@@CrashCitySxS 🤣😂🤣🤣

The style and design of the diff is overdriven on all the machines . So I think your theory is to why it’s failing prolly lines up but mainly the fact of it being spooled so driving down the road or any high speed driving over driven is taking a tole on that driveline. If you could go in and out of 4 wheel drive it shouldn’t be an issue being it’s locked anything that’s faster riding is gonna be strain. Good thinking guys

@CrashCitySxS

Жыл бұрын

Yup you nailed it. Grim rzr reminded me that they are overdriven by design so that the Hilliard diff stays engaged. So add the full spool in there and it’s not designed to handle that

@derekmiller8705

Жыл бұрын

Or yeah tweaked shaft at the yolk. That could for sure cause it imo

@CrashCitySxS

Жыл бұрын

Yokes we’re good after we welded them by hand lol. Got lucky with no wobble and after a half mile ride on the road the ujoint got hot spit out the grease and you couldn’t hold you hand on the yokes. I think it was getting hot on the hard pack trails too. Trail was perfect no dust hardly at all but I’d look in the mirrors and swore she was kicking up way more dust than anyone else. Almost thinking I was seeing smoke or steam. Wish we would’ve had a camera to show the liquid metal dripping out the joint in the dark. It was quite a sight for a rzr lol

@derekmiller8705

Жыл бұрын

@@CrashCitySxS yeah that’s a first 😂 I can say I’ve never seen a u joint get that hot before

The spool binds everything. The gear ratio in the front of all Polaris is different in the front than the rear

@CrashCitySxS

Жыл бұрын

Yup that’s what we’ve been finding out. Everything points to spool bad lol. Thanks for sharing the info! We’re kinda not surprised though. Just wanted to try it with the hydro steer. Live and learn

@BJ-fi7mx

Жыл бұрын

Yes sir anytime and I’m sure u have already seen why they do the gear ratios that way

@WhiskeyTangoFoxtrotOffRoad

Жыл бұрын

@@CrashCitySxS They're just not meant for roads and extended driving. Main reason I'm not going that route. However, I know the spool has to feel smooth with the hydro.

@genebond

Жыл бұрын

As I understand the Polaris Front 'Diff', it is geared 20% lower than the rear. That way, on hard surfaces the Hilliard clutches act like a one-way bearing, and are over-driven, thus free-wheeling. When the rear slips 20%, the front catches, and starts to pull. So, if you lock up the front, the rear is trying to push the front around, and something has to give. But, I'm not sure what you modified, so maybe it's supposed to handle the over-driven issue with one-way bearings, or some other magic.

@CrashCitySxS

Жыл бұрын

Hydro is soooo smoooooth. It’s nice. Ya we check the miles from dtf to past the campground and back. It was like 1.1 or something like that. Spool definitely doesn’t need to see any road at all lol. We’re taking it out

Drive line wind up is no joke i've seen it happen on trucks as well it probably would have been fine in the dirt but no good on hard surfaces

@CrashCitySxS

Жыл бұрын

Kinda got the feeling it’s causing problems on the dirt too. Earlier this year when the ujoint gave up the yoke on the diff actually bent enough just to left the joint fall out. Never seen one bend that much. Kinda figuring heat had something to do with it. No road riding that day

@hoagiesherlin7732

Жыл бұрын

@@CrashCitySxS i never had that problem on dirt in my buggy but it was one ton front and rear

Sparkles is angry, Amber is angry. Don't sweat the cost of learning, improving and being better. Every failure and sucky situation makes you excellent in your craft and life.

@CrashCitySxS

Жыл бұрын

Haha you just gotta give them a minute to get it out of there system then it’s all good! From talking to a good friend grimrzr he reminded me that the Hilliard diff has to be a different ratio than the trans in order for the 4wd to engage and work the way it does. We got to drink some wobbly pops and hangout with good people that night though. Always fun at the off-road park!

@derekmiller8705

Жыл бұрын

@@CrashCitySxS still better then a day at work . Lol and yeah many other people do run full spool without the issues so something is for sure going on there . Everything bad just decided to happen at once for that trip. When it rains it poors . Anyways still glad to see you guys making content again !

Great video ! Have you thought about a Joe Coffman Hill Killer diff ?

@CrashCitySxS

Жыл бұрын

Thought about it saw the price and quit thinking about it lol. Have you thought about buying a lot of parts off our soon to come website so we can buy it?🤣🤣🤣🤣 Just teasing you lol.

@jasonkeith633

Жыл бұрын

@@CrashCitySxS well I have 🤣 waiting on a hydro steer kit to come available and your clutch kit 😉

@jasonkeith633

Жыл бұрын

@@CrashCitySxS after seeing your video about the gearing in the Turbo R trans, do you think Polaris had to change the gearing in the front diff for it ?, Edit, I just checked the IPL and the 22 Turbo R and the 22 Pro XP have different part number

@CrashCitySxS

Жыл бұрын

Hahaha. I think it’s possible to launch the clutch kits maybe possibly keeping my fingers crossed by the end of the week.

@CrashCitySxS

Жыл бұрын

Idk I haven’t gone that far down the rabbit hole on the turbo r yet. That just all depends on what they have beyond the stage two gearsets. They always like to change the pinion/output/ring gear and not give any tooth counts. Did learn something interesting from grimrzr while go on the phone with him. The diff and trans are slightly out of whack by design so that the Hilliard diff works the way it does. Makes a lot of sense because the rear has to slip to engage the diff. Being spooled up locks it all together and stresses the driveline

That sucks.

@CrashCitySxS

Жыл бұрын

Sprinkles behaving like that isn’t gonna be allowed to meet her man and see his makeover!!! She said she’d straighten up lol