Please keep doing videos on the em1010. I got more understanding and help from you than I do when I call customer service. Thanks for all you do

@adubbproductions

2 жыл бұрын

No problem. I will, thanks for watching.

This is the best hat tutorial for the EM-1010. After owning my machine for a year and a half, I finally feel ready to give it a try thanks to this very detailed video! Thank you so much!

@adubbproductions

2 жыл бұрын

No problem. Thank you so much for that testimonial. I appreciate it. Thank you for watching.

He is too cool for school😎. Amazing content 👌🏿 and watched the commercials

Hey Allan, I'm late to the game. This tutorial was so helpful. Especially the parts about adjusting the billstop height and adjusting the screw in the cap ring latch. Complete game-changing information.

Thank you! I just purchased the 1501 TC - waiting on my live training. You're video really helped me get the hat hooped...as the tab was very tight. slightly adjusted tab, BAM! I appreciate your video. I will keeping this video close at hand.

Thanks for posting this video. I have had my machine for over a year and feel it's time to use it. Without being scared 🤪 Please post more video on the Em1010

Muy bonito trabajo y enseñansa tks

Looks Great!

Another wonderful video I'm most definitely looking forward to buying this machine 😀

@adubbproductions

2 жыл бұрын

I’ll make more vids on it. You will know how to use it by the time you get it.

Nice 👍 they came out great

@adubbproductions

2 жыл бұрын

Thank you. The client loved them.

Good stuff guy Always fresh n crisp So pristine ❤❤❤❤

@adubbproductions

2 жыл бұрын

pristine 🤣🤣🤣. You play to much. Thanks @beinwitbellz.

Great video, I'm so SCARED to try my hat design. But I will go by your video

I finally have done a couple of hats, but I keep this video VERY close by. Every time I start a hat I have your video up.

@adubbproductions

2 жыл бұрын

Thank you. Yea it will help you get threw it if you hit a snag. Soon you won’t need it.

I most likely will ever afford a multi-needle Ricoma but I still learn a lot from your videos. Thank you.

@adubbproductions

2 жыл бұрын

Change your mind set. You will afford it if you any it. You don’t want it. Nothing wrong with not wanting one. If you wanted it you would work towards that goal and get it. There is nothing that you want that you can’t have. We breath the same air. You can do anything or get anything I can. Just gotta go after it.

@ellelatorre2893

2 жыл бұрын

@@adubbproductions Thank you for the encouragement!

@adubbproductions

2 жыл бұрын

It’s real. I been there. Not understanding how I could get certain things. Just work towards it. It’s really that simple. It’s not a clear path but if you work towards what you want the universe presents opportunity. That’s the only way I can explain it.

@adubbproductions

2 жыл бұрын

@@ellelatorre2893 I’m only telling the truth from my experience. You are most welcome. We all need a little encouragement from time to time. You as well as others encourage me so much so It’s only right I do the same. But I’m only stating facts. You really can do anything you want. All you gotta do is try. Obstacles move out of your way when they see you’re not stopping.

Great job 👏🏼 very informative keep up the hard work..

@adubbproductions

Жыл бұрын

Thank you Johnny i sure will.

Awesome

Great stuff

@adubbproductions

2 жыл бұрын

Thank you. Just wanted everyone interested but hesitant to see that it does function just fine.

🧡💜💙 Enjoyed the video

@adubbproductions

2 жыл бұрын

That you Cassandra. Good morning.

I love your videos!!! If you could do a video on how to embroider on the side of a cap on the EM-1010 (not the 1501). I would really appreciate it. I just don’t have the floor space for a larger machine. But I need to be able to embroider on the sides of caps. Thanks!

Freaking awesome. Looks good. You wear the hat well. lol. Good job.

Very informative video, I could really use your help with getting my tension right...would you mind doing a video on this issue???

@adubbproductions

2 жыл бұрын

I talk about tension and how to adjust in this video. kzread.info/dash/bejne/npt9la2vmbe7o8o.html

Has anyone adjusted their axis points to get the embroidery lower on the cap

Great Video thank you for sharing. Thumbs up wish you could of gotten a better shot when did the input on the screen panel for the area adjustment. Man can't wait to see the structured hat video will be sharing your video. Thanks Again

@adubbproductions

2 жыл бұрын

I when I was filming I was looking at the screen and not the camera . I will do a video again on it. Actually I have one. It’s on the my-1501 but the menus are exactly the same just situated in a different orientation. I’ll just make another video with that for you.

Great video!!!👏🏼👏🏼👏🏼👍🏻

@adubbproductions

2 жыл бұрын

Thank you Fidel.

@FidelElvira

2 жыл бұрын

@@adubbproductions That embroidery looks Nice! I need to learn digitizing that's a real good finish 💯👏🏼🙏👍🏻

@adubbproductions

2 жыл бұрын

Thank you. Yes digitizing has a huge learning curve. When I fist started I would digitize the same file 5-6 times just to see how things turn out when I do certain things in the software. I’m glad I played around with the software a lot . It taught me a lot. Now I can digitize in 3 different softwares. Each have different looking interfaces and the buttons are located in different areas but ultimately are based on the same rules. Pretty cool stuff man.

@FidelElvira

2 жыл бұрын

@@adubbproductions I send it out I been using different companies and sometimes I don't what I would like to give to my customer but I I have to leave with it because I don't now how to do it yet. I seen different ones that you do and they all look great!

Yesss suhhh🤙🏽

@adubbproductions

2 жыл бұрын

💪🏾💪🏾

Oowwii 🔥🔥💯🔥

Excellent video, what number of needle do you use?

Do you know how to embroider a icon onto the "frocket" of a t-shirt with a front pocket? I cannot think how to do this without stitching through to the next layer of cloth.

Came out great!....still afraid to try them with the cap hoop😬😅...Which needle did you use?

I'll try it soon, wasn't brave enough until niw to do a hat 😃

@adubbproductions

2 жыл бұрын

When your machine is set up right and the tension is right you can embroider anything as long as it’s digitized right.

The only thing I don't like about the em1010 is how the brim of the hat rubs against the machine. What would you suggest to put on the brim to protect it from scrapping ?

What did you use to bend the metal plate back?

Do u have a video on treading and tread purchasing..Love it🪡

I couldn’t get the bar into the nipple frame. It would not reach… is there a step to get the machine to move so I can attach the hat equipment?

Great video thanks. My question I have is that every time i try to go Lower on hat towards brim the needle always breaks because it hits hoop on back side. Do I need to set my needle pressure at another number if so what is that setting?

@adubbproductions

Жыл бұрын

The needle breaks because the material is thinker as it gets closer to the brim. The machine can not penetrate thicker material. You have to work within the machine’s threshold. If you need to pe at rate thicker areas it might be time for you to upgrade to a multi needle machine.

How much left stablizer is left inside the hat?

hi do u use a number system?

Thanks for the video. I really struggled to get the hat hoop on the machine. It was really hard to snap on and then the bib of the hat was rubbing against the back of the machine also. After about 200 stitches the needle broke. You made this seem so easy but it wasn't for me, lol

@adubbproductions

2 жыл бұрын

Lol sorry. It could be your design. ‘Anye to much thread density.

What program do you use to create custom work?

@adubbproductions

9 ай бұрын

Chroma Luxe by Ricoma my affiliate link. Ricoma SHOP link shop.ricoma.com?referral=allan-wade

I have a question for you sir what program do you need for this machine ? can i use pes files or do i need to learn another program

@adubbproductions

2 жыл бұрын

I use Chroma Luxe here is a link to the company if you’d like to inquire about the program. Ricoma SHOP link shop.ricoma.com?referral=allan-wade

@adubbproductions

2 жыл бұрын

.pes is a file type used for brothers embroidery machines. All embroidery programs to the best of my knowledge are able to export different file types for all the various manufacturers. This machine uses .dst files. .dst is one of the most common file types for commercial embroidery machines.

Do you use auto Digitize or do you do it yourself?

@adubbproductions

2 жыл бұрын

No. I don’t recommend ever using auto digitize. You will never get the great quality results you are looking for. Manual digitize only.

Dizope!

@adubbproductions

Жыл бұрын

Thank you

How much is the starter machine I want to purchase one but they don't tell you the price please help

@adubbproductions

Жыл бұрын

What starter machine? The em-1010? Ok think they are around 10k contact Ricoma and they will tell you. Here is my affiliate link. Ricaoma MACHINE Link ricoma.com/US/referral/allan-wade

thought you were Adrian Peterson for a second.

Hello all

@adubbproductions

2 жыл бұрын

Hey Eunice.

How do I get it thick

@adubbproductions

6 ай бұрын

Increase the density in your digitizing software.

Im in a bind,!!!! Help do you speak to people on a 1 on 1 bases like NOW!!!!

@adubbproductions

2 жыл бұрын

Yes. Adubbproductions.com to set it.

Where r you located

@adubbproductions

Жыл бұрын

Philadelphia

Hello

@adubbproductions

Жыл бұрын

Hello

I'd like to purchase this machine could you contact me

Looks Great!

@adubbproductions

2 жыл бұрын

Thank you.