Subscribe to Discovery UK for more great clips: bit.ly/3J8gL9n

I have lots of respect for Richard he did the right thing, he made a mistake and owned up to it like a man. After all he's been doing I have no doubt he'll make things right or even better than before in the end.

@danielgodfrey4415

Жыл бұрын

He's my favorite moonshiner

@brandonwilson173

11 ай бұрын

It’s a fake show

"Mark's got another hysterectomy coming" 🤣🤣

Gotta love how the film crew pitched in and loaned them some gaff tape! 🤣

Richard in my opinion is a honest man i have a lot of respect for him for doing that

I like that this show taught me that not all hillbillies in overalls are racist, some are cool as hell like Mark and Digger and Daniel, etc,.

@TennesseeTriStar

Жыл бұрын

That's the scary part. Most of the south is like this but propaganda and news channel lie and make you think differently. We are brothers under God. I love you bro

@scottbivins4758

Жыл бұрын

We just outlaws and rebels that dont quite listen to the federal government.

@Foxwolfred

Жыл бұрын

Idk man it’s no coincidence that the only two black people on the show are also the only people Daniel us ever made pay for something that has happened to all them they treat them guys way differently than their white friends worse too

@scottbivins4758

Жыл бұрын

@@Foxwolfred Mark and digger made Mike for still he blew up. Race has nothing to do with principles if either Daniel was going to pay out-of-pocket himself or Richard was. Here in the woods your word is everything you have and if you mess something up pay for it its not like Daniel told him u gonna pay for my still. Race has nothing to do with we all outlaw rebels. I don't know how it is in the big city but race is not a issue in a lot of these places we small town folks any body from a small town will tell ya race is not a big issue you still have it thats more than likely the case but your greatly mistaken if you think everyone in south in rural areas are racist.

@carlislepanting5219

9 ай бұрын

​@@scottbivins4758watching from Belize central america I'm from and thanks for the information!! Respect to the moonshiners

I love these 3, appalachia and the bayou coming together

@cleverusername9369

3 ай бұрын

3?

"ya look like ya been smacked away from the table fer farting". EPIC!!

Mark "Dave Robertson is on my tail" also Mark Plays around with still pot in his front driveway.

Mark words said it all OH NOOO

Work smarter not harscrap the center of the still save the top and the bottom that way you'll have that much less copper to buy

@cornfarts

Жыл бұрын

What

Richard is my favorite shiner

@stanleygreen9573

Жыл бұрын

on god very smart man

@groyperfuhr4871

5 ай бұрын

beez is the best

@KDG_001

29 күн бұрын

Richard is great at flavor profiles, but everything else.....?

Fill with water and seal it shut. Then tap the top for a car valve stem. Start putting air to it. Have even blown crushed stainless semi tanker back into shape. It will still have wrinkles but will be back in shape

Love all these boys

Haha a pool floatie. Yep that's bumpkin

Gaff Tape to Seal Joints, Check..... 😂

seems like they could planish out the dents fairly easily

Water and a pressure washer will shape metal easily. You just have to make sure it’s sealed up good.

When they tried to use an inner tube lol 😅

@garygsp3

Жыл бұрын

Wasn't even an inner tube, it was a pond floaty.

@EthanPDobbins

9 ай бұрын

An actual innertube from a truck might have done it.

Man that pot is done. Tough lesson learned there

9:18 out here breaking my haert. hoooooooly.

Honestly, itd be a lot faster if they heated up the still and then used something like a plunger or really anything with suction to pull the metal while Richard was hammering on the inside.

@ChandlerGaming205

Жыл бұрын

Dent puller would have probably worked

@princephilly6561

11 ай бұрын

i was saying that the whole time

@EthanPDobbins

9 ай бұрын

The compressed air would have been my first thought. Or drop a firework down in it.

Use water like 2 stroke exhaust dents

I just thought of something they could have taped the inner tube

I thought they put gps on his truck and told him not to shine I guess they worked past that ?

And there’s no price for experience

I should never have pick the money up the second time my bad

I'm nowhere near bein a professional with anything but something like a huge ball or something that takes air should maybe pop it back out but that's just a thought and I'm hating it for yall cause yalls good folks and I can't believe that just a split second ruint it

hot water just on the dented area

Hope that detective wasn't staking out the place. Richard could have bought himself a bit of trouble. Would have been better if Mark and Digger had freaked at the sight of a still with all the 'heat' they are getting.

@BigSoIcyGang

Жыл бұрын

It's not real 😂

Use a semi inner tube

It's called a relief valve! You open it when you cut off the heat so it doesn't make a vaccum and implode! Don't feel bad I did the same thing once

@ceconk123

Ай бұрын

Yeah you gotta realize the heat is off in order to open it, which they didn't.

I personally know josh

I think there math is off mark and diger where saying copper is 300 dollars a sheet then they say its 3000 for the pot theres no way that's 10 sheets of copper maby 2

@tipsy.fishy2967

Жыл бұрын

he said with time and labor it sucks but he can charge whatever for the labor that went into making it retarded yes but its the price you pay for breaking stuff

@QuinnKallisti

Жыл бұрын

Labour costs.

You mean those fashionable green glasses aren't correlated with your intelligence?

Gotta love how they pretend to act all secret, while producing a docuseries....

Does No One watch Popcorns Last Run? He says the Grain Bill...

Big enough firecracker and we're good to go

Am I being dumb or can you not recycle the pot into fresh sheets of copper?

@LazykidsWorld

Жыл бұрын

If you own a factory that melts down and produces new sheets sure. You can try hammering things back but the pressure did a number on the metal making weaker parts that may give way in the middle of a run.

nobody makes poison poppy moonshine

Your just tapping on it you got to hit it much harder and you need a lot more heat jeeeezzzz

@tylerlormand5644

6 ай бұрын

you dont shape with the hammer u shape by hand a manuplite it with the hammer

Tractor tire inner tube,

Lets do a quiz, what’ll break first? Metal or Thin plastic?

These are cool dudes

I'd soder it shut tight and pump air into

what are they making? candies?

Tubejack n 2x4

😂 it got to be a south Louisiana two a words in three or he the son of Phil

@tylerlormand5644

6 ай бұрын

im from lousiana and fuk what u talkin bout yankee

Disassemble the pot. Cut the side up the side. Roll it back out to flat plate. Work the metal, and reconstruct. Ask M&D for a loaner to daniel. They'll gladly do it. Scripted lol

Looking at an “illegal” still, right in front of god and everyone on the highway

@tylerlormand5644

6 ай бұрын

your god is a lie ........

All y’all that love Richard so much, what y’all think now? Lol He can’t hang with the big boys.

@crush_4103

Жыл бұрын

Get out your feelings man, it’s not that serious

@kami3726

10 ай бұрын

He made one mistake and proceeded to own up to it

@tylerlormand5644

6 ай бұрын

tf u talking bout they turned they back fa a sec,,,,,,,,,,lame ass.......richard is the big dog

I'll fix it cheaper. Damn dude it's roofing flashing. Cheap shit

Lemme get my hammer and dolly and I got you

Rahh

🐠 1k sub goal 🐠

Old news nothing new here

Worst thing you can do is going to those scumbags

@tylerlormand5644

6 ай бұрын

you go shit i post ya ip n location

Need to get rid of these clowns. You regret it if you dont.

@1234PIMPN

Жыл бұрын

I'm curious why you called them clowns? I don't have an opinions either way If they were clowns so I was just curious.

@Euro2005mc

Жыл бұрын

@@1234PIMPN probably because theyre black.

@user-ru3ne9br2b

Жыл бұрын

@@1234PIMPN God forbid you call two black guys clowns. I don't think they are clowns and they make great TV entertainment but come on, you don't have to rush straight to racism.

@user-bw1un1np8q

Жыл бұрын

@@user-ru3ne9br2b where tf is the racism you clown... he called them clowns for the stupid thing they did... not because there skin tone either way it dont make fkin sense you muppet clowns paint there face white. People like you are what ruin this fkin world

@dcking828

Жыл бұрын

@@user-ru3ne9br2b ifk if this has anything to do with race more the fact that they destroyed a perfectly good pot

You are so carless taking a still to the place that would love nothing more then to catch the boys with a still and you drive up with a still like this how carless can you be oh my GOD what are you thinking sertanly not mark and digger that's for sure

Richard has done nothing but mess things up since he got here

@EazzyBeezie

Жыл бұрын

He's learning. We've all been there

@CatWith-AHat

Жыл бұрын

Hes the Hoffmans of moonshiners.

@TennesseeTriStar

Жыл бұрын

Cap. He's a breath of fresh air. I like Richie, he brings good vibes to the show. Don't Hate

@SJL30

Жыл бұрын

@@CatWith-AHat no Mike might as well be todd Hoffmans little brother. He is far worse than Richard.

@bradbeil8198

Жыл бұрын

What can you expect

Richard is clearly on another level of flavor and knowledge about flavors and ingredients. But damn this really shows he's lacking in the logic department. He is NOT a handyman. To think a pool floatie would be stronger than bent copper is so dumb i can't wrap my mind around it. Then after he asks if they can still use it.... Like bro, look at the stress fractures. You trying to die?!?

@tylerlormand5644

6 ай бұрын

why cause they got busy for a moment dont try to shame him

Crap show

This show is so damn fake

@tylerlormand5644

6 ай бұрын

what part of a show dont ya dumas et