I just changed the belts and idler tire on two Nakamichi Dragons, mine, and a friend's. WF measured 0.026 WTD on mine, and 0.032 on his. His pinch rollers rubber are glazed and hard, mine are better, but still old. The next step is to replace the rubber rollers then I think the numbers will look much better. Specifications say it should be no more than 0.019% WTD and 0.04% peak. When working like new I have seen the Dragon run 0.015% WTD. I have a Pioneer CT-F1250 that I will check to see what it runs after I get belts and a tire on it.

@RUfromthe40s

Ай бұрын

the pinch rollers if not ok all deck works worse than ever, it seems being the most important factor on play/record section , all parts are important but if the pinch roller isn´t perfect it sure will caus it to play and record very under it´s full quality

Both beast machines :-)

Super

Hi Boris, Respect to the Nakamichi cassette decks models, which of the following is the best? 1. Nakamichi 682 ZX 2. Nakamichi ZXL 1000 3. Nakamichi ZX-9 4. Nakamichi Dragon 5. Nakamichi RX 505 6. Nakamichi CR-7

@BorisRibov

6 жыл бұрын

It is a personal choice but for me: 1. Dragon 2. ZX-9 3. CR-7 4. ZX-7 5. ZXL1000 6 and maybe RX505 For sure someday will collect the first 4 from the list.

@UberPilot

6 жыл бұрын

That's a pretty good list. I own a Dragon, ZX7, and a CR-7. The little ZX7 is a sleeper. Is cheap and keeps up with the big boys. I would include the 680ZX also.

@UberPilot

6 жыл бұрын

At this level they all sing. That's why you just buy one of each.......

@PedjoGT

6 жыл бұрын

UberPilot ....zx7 is not little at alll....bx300 maybe

@PedjoGT

6 жыл бұрын

Aarón Ibáñez Werthermänn .....In my opinion if you want owerall great machine for good price this is 680 or 682 zx....for me is 680zx is better choice....after owning Dragon, zx 5/7/9, RX and. others... in my heart is always 1000 zxl and 700 zx as the best.

Low W&f on Naks is from head pad lifter

@BorisRibov

3 жыл бұрын

Removing the head pad lifter on Nak (it can be easy removed) still supply better W&F compared to B710/215 mechanism.

@PedjoGT

3 жыл бұрын

@@BorisRibov Of course...but pad lifter is great tweak for low W&F

здравейте! от къде може да се намери тестова касета на 1 кхц и колко струва?

@BorisRibov

5 жыл бұрын

www.ebay.com/itm/TEAC-Level-Test-Tape-MTT-112BN-1Hz-0dB-New/123422984894?hash=item1cbc954abe:g:pNoAAOSwD89bwZdm:rk:20:pf:0

Welches besser ist? Da muss ich mal den Willi (Studer) fragen. Der weiss das bestimmt.

@BorisRibov

2 жыл бұрын

Но не е знаел (Willi), че на неговите машини ще им се скапят магнитите на директните мотори, което е нормално за 40 годишни железа.

Благодаря

Интересно, а что это за язык и почему я его понимаю? :)

i prefer the revox , but have a big colection of nakamichi components ,this and the B215 as the phase linear 7000 from series two and the Z-7000 or the 5000 from TEAC, nakamichi has some issues to it´s building material quality(plastic, the most cheap, heat is a problem), the worst of all is the Dragon ,have you got those decks working as new ,the nakamichi wow and fluter is worst in nakamichi´s ,the TEAC Z-7000 is out of this world quality and it works today with perfection just by doing the regular maintenace ,the nakamichi´s all had to be repaired by a old nakamichi technician in London where my sister lives, mainly i always used Maxell,TDK and SONY also BASF till 1985 and sony in late 80´s till mid 90´s, tdk was the only brand that even building their cassettes more cheap they kept the quality, normally only C60 cassettes

Я не знаю болгарский. Извините. Похоже с Revox B710 проблемы, Проверить блок питания, проверить пассики, азимут головок, скорость вращения ЛПМ и настраивать воспроизведение по тест кассете и далее всё как обычно.

@BorisRibov

6 жыл бұрын

Владимир Коротков It was fully rebuilded. mobile.facebook.com/lab2104/albums/1655311341169228/?ref=page_internal The problem is with its weak magnets in DD motors.

@51_Edw_spb_ru

6 жыл бұрын

чувак, какие пассики в ревоксе? :-) Ты их видел?

Nakamichi Dragon has less wow&flutter

@harrystevens3885

6 жыл бұрын

Yes it's zero when it's not working which is often....

@Badassvidsz

4 жыл бұрын

Harry Stevens :: Hahaha i saw what you did there bad boy :-)

@MrMissingReel

4 жыл бұрын

@@harrystevens3885 😂

I don't care how much better the Nakamichi is. I can always fix any Revox/Studer deck myself, when it breaks down and sell it, while Nakamichi is a nightmare to repair and I wouldn't even bother opening it. Revox is more economical, cheaper and it will run longer than Nak. Ever been in a situation, when NAAC motor broke in Nakamichi deck?

@borisribov2271

6 жыл бұрын

Jeff Krong I don't care, too. I can service every Nack with NAAC system, also every Revox (and the problems in Revox is wirh the worn DD magnets). Nothing good when the magnets are weak. So, it is a business case - I can get 0.02% w&f of ever one Dragon and I bet that you cannot reach lower than 0.03% of any Revox deck.

@HamtaroEL

6 жыл бұрын

Jeff Krong ZX-9 and CR-7 are better than B-215 and DRAGON.

@PedjoGT

6 жыл бұрын

This is not true...nak for servicing is like any other deck and these decks are pretty reliable....Revox have issue with capstan shafts and you cant service that....you must send mecha to the Revox and repair is expensive like hell.

@HamtaroEL

6 жыл бұрын

Jeff Krong ZX-9 and CR-7 are better rivals.

@TheMagicStar80

5 жыл бұрын

I would go with an Akai GX-95 ..in my opinion it is the one of the best decks ever made..i had Naks and Revox they dont last and parts are expensive and hard to find.. just my opinion

The 1989 Sony TCK 950 ES deck beats both hands down in every respect, the old Revox and the overrated Dragon....Sony 950 Deck has the very best all around quality, and sound, followed by the superb ASC 3001 Studio Cassette Deck from Germany. If you look inside of a Dragon it has the built and cirquit qiality of an old transistor radio...revox is better. If you want a workhouse super reliable deck get an Akai GX75 Mk2 or 95...

@BorisRibov

5 жыл бұрын

I'm sure :) I have 909es, also Akai 95 and 91. Both far away in souding and especially on wow&flutter.

@Schlipperschlopper

5 жыл бұрын

@@BorisRibov When worn out ;-)

@giacyross7231

4 жыл бұрын

Akai GX 95!!! Great tape deck!!!