When he first started it, I subconsciously reached down to pet my dog and found that she wasn't even in the same room. With no load on it and that short exhaust, it really sounds like panting.

@WJCTechyman

3 жыл бұрын

heh, my thought exactly

There's something very soothing about a hit n' miss engine running properly :-)

@rpatrick2

3 жыл бұрын

Like a watch

@tomlindo2863

3 жыл бұрын

I fell asleep like four times during the video... Just wanted to clarify that the video was great but that damn engine could put a guy on speed to sleep.

@arty1799

3 жыл бұрын

The sweet sound of work being done for you rather than by you. Very sweet sound.

@edilbertomarmol3395

3 жыл бұрын

Very good

@billyhellboy6138

3 жыл бұрын

Gonna bend my back and pick a bale o cotton miss elizer dear Liza gonna pick a cotton

To us Ol Timers that is a sweet sound for sure. Amazing how this was built 100 years ago. Thanks, Mike.

can we see this thing under a load? that would be awesome to see if possible. Great video!

@martinhughes8500

3 жыл бұрын

Easy to do. Put a wood wedge under the flywheel.

@alvanjudson2836

3 жыл бұрын

Even easier, just place a big boot against the flywheel.

@ickipoo

2 жыл бұрын

It would be wonderful to see it doing real work such as driving a generator.

2:30 PM and this is putting me to sleep .

@texan01

3 жыл бұрын

If someone would make an hour long video of one running, that would be the ultimate soothing machine

I sooooooooo want to hear this engine under load. Let the venerable old girl show us what's she's got! Love the vids!

When I was a kid in the 70's these were all over mid Michigan. Loved hearing the pop-pop-huf-huf-huf-pop echoing through the woods. The exhaust pipes used to be buried or just lying on the ground, sometimes the exit would be hundreds of feet from the actual pump.

No rambling love when you explain things you are very knowledgeable

This channel would fit right in between This Old House and the wood working shows on PBS. And yes, that’s a compliment.

Glad to see you fixed the 'issue' there is something about these old engines.

I see a 65 ford peaking out from behind the shop. That was my first vehicle. You've got some great items over there👍🏼👍🏼👍🏼

@tomploeg2260

3 жыл бұрын

Ya road king didn't have room to store it at his house

You're camera work is fine. The motor is purring now. Awesome job

Great to see these old engines saved! Great job!!!

Always enjoy your videos. I was a engine mechanic for 32 years at my last job working on modern engines, but i prefer working on old engines like flatheads and early pre 1963 Chevy 6 cyl. engines. Being a old man now I just work / play with old small air cooled engines. Keep them coming. I have learned a lot about generators watching your videos. I am getting ready to start on my 1945 Briggs model B engine with a 800 watt Kohler generator. I also have a Onan Built Fairbanks Morse model 1B-7 like you had.

I knew you'd figure it out, Mike! Great explanation and very well done, as always! Thank you for another great video, sir!

I new you could figure it out if anyone could. Love watching these old engines run. Thanks for sharing Mike. Hope you had a great Thanksgiving!

Nice job getting it running. Thank you for the explanation on what makes it tick.

Great video ,love the engine and the explanation .You have saved a true piece of mechanical history.

Mike! On these engines, U are pure gold. Thank You for showing us!

I love hit n miss engines! But LOVE seeing them work 😍

LOAD! We need to see it with a LOAD!! We know you are going to do it. Awesome engine! Love it! That huge V8 Gen engine is a treat, too!

Really enjoyed this video Mike. I never have known how Hit and Miss engines worked until now. You explained it perfectly, thanks. 👍

Had to watch this one again.. After I woke from my last comment.. She'll put you right to sleep... Thanks Mike for the update on her!

HOT GUYS IN OVERALLS MONTHLY CALENDAR DECEMBER EDITION

I watched both vids and enjoyed them immensely! Thank You!

@SmallEngineMechanic

3 жыл бұрын

Thanks for watching!

What a treat! Loved every minute of this and am grateful for the excellent explanation of how it is governed. Thanks very kindly for making the effort to share this with us.

You sir are a testament to a true technician. IMHO thank you 🙏

I absolutely look forward to watching that old girl work.

I remember the sound of that engine from many years ago as a kid. My dad told us what it was but I had never seen one up close until your video. Yes for me I could fall asleep to that sound 😴

Great to see it chuffing along properly! Thumbs up Mike!

awesome explanation of the operation of a hit and miss , love the engine

Congrat's on the 50k subscriber's you deserve it . I alway's enjoy your video's informative and alway's interesting keep up the great work.

I never knew the term "hit n miss" was ment towards governing the rpms on these, I was always under the impression it was ment towards just how the engine fired and nothing more. Thank you greatly for the explanation 👍

That's some good quality work!!! Well done!! It'd be cool to have it powering something that you could bring to shows/meets... It's very hypnotic, watching the valves opening and closing, that exhaust valve catch popping in and out, etc,

Always enjoy how you explain things. The hot tube set up is very interesting. The gas regulators and, accumulator info is great! Looks like you have your own little Jacktown Grove there. Good stuff Mike!

Your videos are great!! Your break down on what a hit and miss engine is, and how it operates is one of the best I believe I have heard. Your experience and knowledge with the type of old equipment is impressive. These old engines as well as others built during that time in our history were built to last forever. Those who like yourself are the ones proving this everyday. Thank you for keeping these wonderful machines alive and out there in front of the next generation to learn about and to get excited about how the mechanical systems of such things work, you my find friend may be that person who lites that fire within one or two of these young people that now has to have their hands and minds in an mechanical environment for this now has become their passion. Becoming the next engineers and or mechanics, who come up with new engines as well as the ways they are built. And who changes the Science itself on the way we think as to how we build . You never know how people like yourself touches others. When teaching or just taken the time to show and share with the young, when they have a question that after you answer it now becomes an hours long talk. Ever had one of those? I have. Ha, Ha, Ha. You and yours take care and may God continue to Bless you all.

Nice explanation of this particular engine! This way of ignition of a gas engine is new for me. Know lo w and high tension methods off coarse, as this one with Oil engines. Chapeau!

Thanks Mike, that was great. Very interesting, and the mods made a lot of sense, but let me say, I would never have thought of them in 1000 years. All the best, Mart in the UK.

Nice of you explain what the problem was and how you fixed it.

Thanks for the video. I would absolutely love to see you put some kind of load on this!

I got my son watching your videos.

Hi Mike. It's hard to believe,just how much time has passed, I have been watching since you and the gang were much younger. liked,shared. All my best.

Glad to see you got it dialed. That hot bulb idea is so cool. Probably not as efficient as a spark ignition engine for that reason though. I'm guessing the well head guys weren't too worried about wasting a little bit of natural gas that they were going to vent to atmosphere anyway. Thanks again for sharing.

I remember listening to this in the oil field years ago.

Your camera work is just fine for purpose. I kinda knew how hit and miss engines work but your explanation at close hand helped to clarify matters.

Nice work Mike, that fuel system took a little time to figure out but you have it running great now.

I love it!. I play with old hit and miss engines and any other odd stuff I can find, I even have an old Onan 3kw parallel wound diesel, and an Ishihara 2 stroke rock drill/jack hammer, using three pistons, 2 connecting rods, one cylinder head, and a fuel oil mix squirter and a single spark plug! I'll have to do a KZread video on that.

Another great video. Look forward to your next!

I could listen to this all day 😊👍

Love your videos! keep it up!

I bought a 54 Chevrolet book mobile and when I went to get it there was 14 of these in it and had been in it for decades. My son and I got all of em running within a week of getting them, the 14 are complete engines and I also got about 8 boxes of extra parts and 4 disassembled engines, I learned fast don't mess with the timing lol.

I totally agree a water pump would be a great old school way of load testing it. Glad to see you got all the bugs worked out of it mike.

@jlucasound

3 жыл бұрын

Yes! Water pump.

Nice work to get that old girl running like she should. I always learn something from you - I told Roadking that I have nicknamed you The Professor!

Excellent video keep up the great videos 👍👍👍👍it's very nice to see it running right I had figured that it was not running right I have seen them engine like that at steam threshing shows before here in western Minnesota

That is a cool engine. I don't think I've seen any propane ones. Interesting diagnosing too. I like the kick it has. Thanks for the video!

Awesome follow up video! Extremely good explanation of how a hit and miss engine works!!! Great diagnostics to find the problem! Keep up the awesome content! Dan @6-4_Fab Glen Rock, PA

Nice video, well done. Nice work on explaining the "double suck" phenomenon, and then fixing it. If I might try to explain what you were alluding to at around 17:20 in the video, you can look at it like this: a certain amount of mechanical energy is stored in the flywheel, as a result of its rotational speed; at the same time, certain amount of mechanical energy (also called "kinetic" energy) is _lost_ by the flywheel on each rotation. When the engine is freewheeling (operating without an external load), the only losses are to friction within the motor and to the air, which is stirred up by the flywheel's spokes and surface. The _ratio_ of the energy stored in the flywheel to the energy friction loss on each revolution is fairly low, so the amount of mechanical energy added to the flywheel by each "combustion event" is enough to carry it through quite a few revolutions, during which it slows down as its stored kinetic energy is (in a sense) "withdrawn." If a real load is attached to the engine, like a pump or a saw or an electric generator, the amount of energy lost to the load is much greater, expressed in terms of the amount of energy stored in the flywheel. Therefore the flywheel loses much more energy (and therefore rotational speed) per revolution, which causes the exhaust valve to be closed pretty much on each power stroke; there will be one combustion event for every two revolutions. In that situation, the engine is delivering its full-load output power, as you know. Any further load added past that point will cause the engine to "lose the battle," with each successive combustion event not adding enough kinetic energy to make up for that lost to the load; the engine slows down and finally stalls out.

Mike, I am really enjoying the video format you did here and in the last several videos. The explanations aren't oversimplified or overcomplicated and I am learning stuff, please keep at it. Also, I do like a hit and miss :). Sounds like a panting dog when coasting.

Glad you got it ironed out Mike. Nice display

I found your descriptions/explanations very clear and thorough, and anticipated my questions. For example when you illustrated how the exhaust valve was held open when the engine reached speed, I was thinking "wow that'll waste fuel won't it?" Then you immediately described how the intake would only open under low pressure conditions in the cylinder... Anyway no rambling...excellent!

Great stuff, it runs much better now!

Good explanation of the hit & miss principle.

Thanks for going to the bother of detailed explanation! Iv'e heard a lot of hit & miss doing the "Double Suck" over the years!

Genius way to regulate the speed en the sound is awesome 😊

It's like an old, quiet pendulum clock, just ticking over like time itself. Lovely.

Awesome machine Mike. Thank You

Good closure on the first video for this engine

Great work figuring out the double stroke.

Finally a follow up on this engine !

"Ooh oh chitty chitty bang bang , chitty chitty bang bang we love you! " Part Deux

gotta love when it hit's it even makes the camera vibrate

very nicely done, Mike. Thanks for the update. I've never understood why people cn't sleep without noise, but maybe I should put the previous in a loop, and try it. Or not.

Mike, you did a beautiful job of explaining how that engine operates. I have a Kohler light plant which needs some attention hopefully someday we can get together. Chuck Copeland

Very cool Mike! Glad you got it all sorted out and running well! Would be cool to see it going some work at some point! I know you want to hook a generator up to it lol!

I'm just imagining this engine on "TheZachLife" channel, pumping away at one of his old oil wells. I can just see a nice Lufkin nodding up and down, and this engine just popping away all day long.

I love it. If you hook it up to a matching generator and run it from the residential gas supply you could make a 12 hour ASMR video for those who need it. :)

Would love to hear this under load, even an old 2x4 board load.

Id be interested to see this engine powering a water pump or similar device.

an accumulator on the intake side is called an attenuator. Nice job sounds great, love the pop pop

That's a really nice engine Mike. Sounds great.

Thats the best engine yet!! Love it!

Truly a work of art

Nice work Mike..

Your kicking it Mike great stuff

nice engine, would love to see it under load similar to what it would have been back in its working the day .

Neat!. I enjoy seeing your persistence in figuring out what this engine needed! One suggestion/request. Could you put a load on it to make it fire every cycle? Just lever a 2X4 against the flywheel and load it enough to keep the RPM under governed speed to see what it sounds like!

Can't wait for the belt up video

Your camera work is much more pleasant to watch them National Geographic, enjoy your videos👍

Great work 😎😎

Thing is I'm glad for you Mike

Great explanation, thank you

shopdog Sam is very proud of you!

Nice job thanks. Maybe a recirculating water pump would be a load Dyno for a constant load.

Runs great Mike!

Very informative. Thank you.

Loved it. Good night David, Good night Chet. Snoring, snoring, snoring.

great share Mike sounds awesome !

Thanks for the extra info ( hitt-miss) ..... Mike..still am glad I'm not hauling your gear around

Sounds great!

Reminds me of the days living near a very small oil rig in Southern California. The majority of them are nothing more than museum pieces now, but there’s still a few functional near the Long Beach/Los Angles harbor.