Reverse Osmosis FILTERS How To Replace - APEC RO System
Тәжірибелік нұсқаулар және стиль
How To Replace Your Reverse Osmosis Water Filters. I'll Show you just how easy it is and a little bit of what NOT to do.
Grab some Fort-Knox Co. gear, Visit my website: fortknoxcompany.com
You should change out your 3 stage (Particle/Carbon/Carbon) filters every 6-12 months. You should change out your coconut shell carbon filter ( Chlorine/Odor/Contaminant )FI-ES-TCR-QC & Rejection TFC Membrane Filter (Other Contaminants) every 2-4 years.
Here are the replacement filters for your RO System:
3 Stage Filters Set - amzn.to/3urzOq6
Compatible APEC 3-Stage Filters- amzn.to/3TcSFj5
Coconut Carbon Filter ( FI-ES-TCR-QC )- amzn.to/47Q6g3P
Membrane Filter ( MEM-ES-50 )- amzn.to/47GFLyd
Replacement O-Rings- amzn.to/3RdhFVK
BEST RO System- APEC Reverse Osmosis Systems:
amzn.to/47oVKk1
Some of these links are my Affiliate links and will take you directly to the items I'm using in the videos or installing. They are at no additional cost to you, but if you decide to purchase through them I'll receive a small commission. In some cases you will actually receive a discount for going through the links I provide. Just wanted to let you all know and that I appreciate your views, your LIKEs and all the support.
WEBSITE DISCLAIMER
The information provided by Fort Knox Co. (“we”, “us” or “our”) on / @fortknoxco (the “Site”) and our mobile application is for general informational purposes only. All Information on the Site and out mobile application is provided in good faith, however we make no representation or warranty of any kind, express of implied, regarding the accuracy, adequacy, validity, reliability, availability, or completeness of any information on the Site or our mobile application. UNDER NO CIRCUMSTANCE SHALL WE HAVE ANY LIABILITY TO YOU FOR ANY LOSS OR DAMAGE OR ANY KIND INCURRED AS A RESULT OF THE USE OF THE SITE OR OUR MOBILE APPLICATION. YOUR USE OF THE SITE AND OUR MOBILE APPLICATION AND YOUR RELIANCE ON ANY INFORMATION ON THE SITE AND OUR APPLICATION IS SOLELY AT YOUR OWN RISK.
EXTERNALS LINKS DISCLAIMER
The Site and our mobile application may contain ( or you may be sent through the Site or our mobile application ) links to other websites or content belonging to or originating from third parties or links to websites and features in banners or other advertising. Such external links are not investigated, monitored or checked for accuracy, adequacy, validity, reliability, availability, or completeness by us. WE DO NO WARRANT, ENDORSE, GUARANTEE, OR ASSUME RESPONSIBILITY FOR THE ACCURACY OR RELIABILITY OF ANY INFORMATION OFFERED BY THRID-PARTY WEBSITES LINKED THROUGH THE SITE OR ANY WEBSITE OR FEATURE LINKED IN ANY BANNER OR OTHER ADVERTISING. WE WILL NOT BE A PARTY TO OR IN ANY WAY BE RESPONSIBLE FOR MONITORING ANY TRANSACTION BETWEEN YOU AND THIRD-PARTY PROVIDERS OF PRODUCTS OR SERVICES.
Пікірлер: 18
I appreciate you showing the spraying out at the beginning! Thanks man! A lot of people would edit that out. Appreciate you!
@FortKnoxCo
Ай бұрын
No problem at all. I wanted to see the good and bad too. I felt like every video I found showed the idea use and like a commercial. I knew there was some stumbling around or complications that ppl encountered. So I wanted to just show it as it is.
Appreciate the video and humor - just picked up a series of filters as we were overdue.
@FortKnoxCo
4 ай бұрын
Nice! Yeah I always procrastinate on changing these. Then after I’m done I remember it ain’t so bad
Great vid, if possible, would love to see the 2 filter one as well
@FortKnoxCo
4 ай бұрын
I appreciate that. Thank you 🤙🏼
Thank you, that was super helpful!
@FortKnoxCo
4 ай бұрын
Your very welcome. I’m happy you got something from it
Thanks
@FortKnoxCo
4 ай бұрын
Your welcome 🤙🏼
Hi Sir, Thank you for your detailed video. I have one question do I need to run water after turn on water tank on (in video 11:15)
@FortKnoxCo
Ай бұрын
It’s good practice to run it for a couple minutes after new filter is installed. Some have it written to do so, but your not wrong if you just do it anyways
Mine are so tight I can’t remove them. I am wondering if you have tips for that
@FortKnoxCo
3 ай бұрын
Man that’s tough. Make sure the waters off and pressure is released out of the system. Open the spigot to let water out of it once you have it shut off cuz that will definitely keep them in there tight. Next I’d make sure you have a good wrench. Unfortunately they all seem to be plastic, but a metal one that fits tight would be perfect. Not sure if they exist though. You can also try tapping on the cylinder with a heavier object a little to see if that helps release the threads. Usually a combination of those things gets it going. Wish I could be of more help.
I have a Westinghouse RO system and cant seem to find the filters for it, Any recommendations? Or do I need to get another system?
@FortKnoxCo
Ай бұрын
I’m not 100% familiar with Westinghouse systems. But a quick google search it looks like allfilters dot com has some? And it could be possible that a generic brand or universal filter may work if it’s like theses other systems with cartridges inside.
Whats the difference between the apec roes 50, 75 or 100?
@FortKnoxCo
17 күн бұрын
I believe the number refers to the GPM Gallons per minute. So each system filters water at a different flow rate.